IEC 60335-2-29 Fig 101 Charger Normal Operation Test Apparatus For Battery Charger Test
![]() |
... the normal working conditions of a battery charger under load. Designed according to GB/T4706.18-2014/IEC60335-2-29:2010 relevant ......
Sinuo Testing Equipment Co. , Limited
|
Button Operation Light Testing Equipment Lampholder Normal Operation Test
![]() |
...Normal Operation Test Device HDJ0006 Standard: IEC 60238 Edison screw lampholders, clause 18 and figure 4 Application: This device is suitable for determination of stability and mechanical properties of the lamp holders. Test sample: Edison screw lampholders Feature: Mainly used for the normal......
shanghai kerang technology co ltd
|
Apparatus For Making And Breaking Capacity Normal Operation Tests EN60669-1 Fig12
![]() |
Apparatus For Making And Breaking Capacity Normal Operation Tests EN60669-1 Fig12 Products Introduction: The test machine is designed and manufactured according to EN 60669-1 Fig 12 and 18, IEC 60884-1 clauses 20 and 21 figure 16, and etc. It is applicable for the switches breaking capacity and normal operation life test of household and similar fixed electrical installations, also suitable for plugs and sockets’ breaking capacity and normal...
Guangzhou HongCe Equipment Co., Ltd.
|
Switch Plug Socket Tester Apparatus For Breaking Capacity And Normal Operation Test
![]() |
...design, it is suitable for household and similar fixed electrical installations switch capacity and normal operating life test. Its aim at checking the switch whether is able to withstand the mechanical damage and electrical fatigue damage in normal use,...
KingPo Technology Development Limited
|
IEC60598-1 Luminaries Test Equipment Direct Plug In Test Apparatus
![]() |
... of the plug-in device with plug-in pin on the socket during normal use is within the specified range. Compliance: It is suitable for testing the torque exerted on the output socket by the device which is to be inserted into the fixed output socket and is...
SKYLINE INSTRUMENTS CO.,LTD
|
Low Temperature Pressure Impact Test Apparatus
![]() |
...Test Apparatus, IEC Test Equipment Product information: The specimens are subjected to an impact test by means of an apparatus as shown in figure 27. The apparatus, positioned on a pad of sponge rubber 40 mm thick, is placed together with the specimens in a freezer at a temperature of (–15 ± 2) °C, for at least 16 h. At the end of this period, each specimen, in turn, is placed in the normal...
Guangzhou Shice Equipment Co., Ltd.
|
IEC60238-2011 Lampholders Test Apparatus Stainless Steel Material E14 / E27 / E40
![]() |
...-2011 clause 18, it’s used to test the lamp holder when normal use shall cause no excessive wear or other harmful effect. The lamp holder’s insulation and protection against accidental contact shall not be serious affected. ......
Pego Electronics (Yi Chun) Company Limited
|
Needle Flame Tester IEC 60695 Flame Test Machine Testing Apparatus
![]() |
...IEC 60695 Flame Test Machine Testing Apparatus Instrument The Needle Flame Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. The Needle Flame Tester consists of a diameter of 0.9mm needle burner that tilts to 45degree from the vertical and is fueled with butane gas. The test......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
3KW Supply Cord Flexing Test Apparatus With One Working Station
![]() |
3KW Supply Cord Flexing Test Apparatus With One Working Station IEC60335-1 Clause 25.14 Supply Cord Flexing Test Apparatus With One Working Station Product information: This test apparatus checks the protection of the supply cord where it enters the ......
Dongguan Kingpo Technology Limited
|
Ball-pressure Apparatus
![]() |
Applicatiion: Ball-pressure Apparatus is used for testing parts of nonmetallic materials for resistance to heat. It is applicable to electrical equipment,lighting equipment, lowvoltage apparatus, Household electrical appliances, machine tool electrical ......
HK LEE HING INDUSTRY CO., LIMITED
|