Home > Electrical Equipment & Supplies > Generators > Generator Parts & Accessories >

Iec 60335 2 14 Cylinder Rod Test Probe

1-10 Results for

iec 60335 2 14 cylinder rod test probe

from 9 Products

φ40 Mm Cylinder Rod Test Probe With Hemispherical End IEC60335-2-14

IEC60335-2-14 Hand-held blenders φ40 mm Cylinder Rod Test Probe Standard and Application: The φ40mm cylinder rod meets the standard requirements of IEC 60335-2-14 Clause 20.103. It is used to verify the hand-held blenders other than hand-held food mixers......

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

IEC 60335-2-14 Test Probe B Of IEC 61032 With Circular Stop Face With A Diameter Of 125 Mm

...-2-14|EN60335-2-14|GB4706.30 IEC60335-2-14|EN60335-2-14 Appliance: This test probe similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the...

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

8mm Cylindrical Rod Test Probe For Blender As Per IEC 60335-2-14 Clause 20.102

Φ8mm Cylindrical Rod Test Probe for Blender as Per IEC60335-2-14 clause 20.102 1. Introduction The Φ8mm cylindrical rod test probe is designed to meet the test requirements of IEC60335-2-14 clause 20.102 and GB4706 clause 20.102, it is applied to check if ......

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

IEC60335-2-14 Jointed Finger Test Probe with 125mm

Conform to the IEC60335-2-14 clause 20.2. Means of a test probe that is similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test finger and ......

HK LEE HING INDUSTRY CO., LIMITED

Address: 7F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China

80mm Length IEC 60335 Test Finger Blender Probe

IEC 60335 Test Finger Probe Blender Probe Nylon Handle Stainless steel Probe Standard: IEC 60335-2-14 ‘Household and similar electrical appliances - Safety - Part 1: General requirements’ clause 20.102. Standard description: Blades of hand-held blenders shall be completely screened from above and shall not be able to touch a flat surface while rotating. Compliance is checked by inspection and by applying a cylindrical rod......

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

Length 100mm Rod Test Finger Probe With Nylon Handle IEC 60335-2-16

Test Rod With Nylon Handle 100mm Product information: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is used to test concealment of the reset button of a protective device. Appliance is checked by applying a rod in any direction to touch the protective device which is in off state. The diameter of rod is 76 mm ±0.1mm and it has a flat end. There shall be a distance of at least 1.5mm between the rod...

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

Stainless Steel IEC 60335 Test Finger Probe 18 Ф8.6

IEC 61032 Figure 12 Test Probe 18 Small Finger Probe Ф8.6 This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children......

Guangzhou Shice Equipment Co., Ltd.

Address: #1,chencongxi10xiang,chencongcun,qiaonanjiedao,panyu,Guangzhou

IEC 60335-2-84 Toilet Seat Endurance Test Machine with LCD Touch Screen

APPLICATIONS & TEST PURPOSE: The machine design mainly focuses on two types of designs for the cover plate: fatigue and strength tests. Under the set force value, stroke, displacement, time and speed conditions, repeated tests are conducted on the product......

Hai Da Labtester

Address: Room 105, Building F4, District F, Tianan Digital City, Nancheng District, Dongguan City, Guangdong Province,China

Ф10mm Handle Test Rod For Testing Concealment Of The Reset Button

...Test Rod For Testing Concealment Of The Reset Button IEC 60335-2-16 Clause 22.102 Test Rod For Testing Concealment Of The Reset Button Of A Protective Device. Product information: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is used to test concealment of the reset button of a protective device. Appliance is checked by applying a rod......

Dongguan Kingpo Technology Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

Submit your “iec 60335 2 14 cylinder rod test probe” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Dongguan Kingpo Technology Limited Products: Ф10mm Handle Test Rod For Testing Concealment Of The Reset Button
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “iec 60335 2 14 cylinder rod test probe” inquiry

*From:
Your email address is incorrect!
To: Sinuo Testing Equipment Co. , Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0