IEC 60335-2 Rigid Finger Test Probe 11 With Force 50N
|
IEC 60335-2 Rigid Finger Test Probe 11 With Force 50N Product Information For Rigid Finger Test Probe 11: This rigid finger probe conforms to the standard requirement of IEC IEC60335-2-6 clause 22, IEC60335-2-9 clause 22, IEC61032 figure 7 device 11, ......
Sinuo Testing Equipment Co. , Limited
|
Unjointed Rigid Finger Test Probe of IRAM 4220-1 / IEC 61032 / IEC 60335
|
...) and is used to simulate a human finger. It is also used by the standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. The Rigid Test Finger was made on stainless steel and...
HK LEE HING INDUSTRY CO., LIMITED
|
iec en astm as nzs test probe,rigid test finger probe
|
... to dangerous parts and to assess the mechanicalresistance of openings in the enclosure or inner separations. rigid test probe is made of high-grade steel in accordance with the standards and conforms the measures of the flexible finger probe picture 2,...
ALLIED TESTING (HK) CO.,LTD.
|
Toys Testing Equipment Thrust Test Straight Finger / Test probe 11 Of IEC 61032
|
Thrust Rest Finger Test Finger Rigid Test Finger Test Probe Uses Protection test straight finger 50N thrust test finger Used to test the body to prevent touching parts, can also be used to check the hole of the outer casing or the inner baffle of the outer......
SKYLINE INSTRUMENTS CO.,LTD
|
IEC 60335 Test Finger Probe
|
... Probe Meets Requirements for Testing Standard(s) including but not limited to:IEC 60950 EN 60950 UL 60950 CSA 950. Hot Tags: iec 60335 test finger probe, China, manufacturers, suppliers, factory, custom, wholesale, IEC60065:2014 Hi-pot (Voltage Withstand)...
Dongguan Kingpo Technology Limited
|
IEC 60335 Test Finger Probe
|
Test Finger Probe , IEC 60335 Testing Probe Kit With Carrying Case Product information: 1.IEC Jointed Finger Probe 2.50mm Impact Test Ball 3.Test Pin Probe: short 4.Rigid Finger Probe 5.Ball Pressure Tester 6.Telecom Test Probe Meets Requirements for Testing Standard(s) including but not limited to:IEC......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger
|
IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Technical specification Test......
DONGGUAN LONROY EQUIPMENT CO LTD
|
Test Probe Similar To Test Probe B Of IEC 61032 With Circular Stop Face Ø50 Mm , IEC 60335-1 Test Probe B
|
... with circular stop face Φ 50 mm 1.Knurled Finger Diameter:12mm 2.Knurled Finger Length:80mm 3.Baffle Plate Diameter:50mm 4.Baffle Plate Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1....
KingPo Technology Development Limited
|
IEC 60335 Test Finger Nail Probe
|
IEC 60335 Test Finger Probe Test Finger Nail With 80 Probe length Standard: IEC 60335 ‘Household and similar electrical appliances - Safety - Part 1: General requirements’figure 7. Application: It is applicable for the non-removable components which are ......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
New Conditon IEC60335 Long Test Probes Kit Insulating Material Handle 1 Year Warranty
|
...Test Probe Kit Includes Standard Test Finger Long Pin Test Probe Test Probe 41 ect. The PG-60335 contains the probes listed in the core of the UL / IEC / EN 60335 requirements. The IEC60335 Test Probe includes the following probes: 1. Jointed Finger Probe Diameter of finger: 12mm Length of finger......
Pego Electronics (Yi Chun) Company Limited
|