IEC 60335 Test Probe Kit
|
... do not have access to hazardous parts in equipment and machinery. SPECIFICATIONS 1. Jointed Finger Probe: Precision probe which follows IEC specifications and meets the newest requirements. The design features a plan simulator to prevent misuse and a...
HK LEE HING INDUSTRY CO., LIMITED
|
80mm Length IEC 60335 Test Finger Blender Probe
|
IEC 60335 Test Finger Probe Blender Probe Nylon Handle Stainless steel Probe Standard: IEC 60335-2-14 ‘Household and similar electrical appliances - Safety - Part 1: General requirements’ clause 20.102. Standard description: Blades of hand-held blenders......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 60335 Test Finger Probe
|
...Probe , IEC 60335 Testing Probe Kit With Carrying Case Product information: 1.IEC Jointed Finger Probe 2.50mm Impact Test Ball 3.Test Pin Probe: short 4.Rigid Finger Probe 5.Ball Pressure Tester 6.Telecom Test Probe Meets Requirements for Testing Standard(s) including but not limited to:IEC......
Guangzhou HongCe Equipment Co., Ltd.
|
rigid test probe,IEC 60335 IEC 60065,test probe.test finger probe.iec test probe
|
...probe,IEC 60335 IEC 60065 Model TP11: rigid test probe,IEC 60335 IEC 60065 rigid test probe is used to assess protection of persons against access to dangerous parts and to assess the mechanicalresistance of openings in the enclosure or inner separations. rigid test probe is made of high-grade steel in accordance with the standards and conforms the measures of the flexible finger probe......
ALLIED TESTING (HK) CO.,LTD.
|
IEC 60335 Test Finger Probe
|
... Probe Meets Requirements for Testing Standard(s) including but not limited to:IEC 60950 EN 60950 UL 60950 CSA 950. Hot Tags: iec 60335 test finger probe, China, manufacturers, suppliers, factory, custom, wholesale, IEC60065:2014 Hi-pot (Voltage Withstand)...
Dongguan Kingpo Technology Limited
|
8mm Cylindrical Rod Test Probe For Blender As Per IEC 60335-2-14 Clause 20.102
|
... 20.102 and GB4706 clause 20.102, it is applied to check if the blades of hand-held blenders are completely screened from above and unable to touch a flat surface while rotating. The cylindrical rod from any position between the vertical and an angle of...
Pego Electronics (Yi Chun) Company Limited
|
IEC 60335-2 Cordless Kettle Irons Blenders Stand And Withdrawn Endurance Test Apparatus
|
... Kettle Irons Blenders Stand and Withdrawn Endurance Test Apparatus conforms to the standard requirements of IEC 60335-2-3: clause 22.101, IEC60335-2-3: clause 22.105, IEC60335-2-15: clause 22.103, IEC60335-2-14: clause ......
Sinuo Testing Equipment Co. , Limited
|
IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger
|
IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC......
DONGGUAN LONROY EQUIPMENT CO LTD
|
Test Probe Similar To Test Probe B Of IEC 61032 With Circular Stop Face Ø50 Mm , IEC 60335-1 Test Probe B
|
... 2.Knurled Finger Length:80mm 3.Baffle Plate Diameter:50mm 4.Baffle Plate Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1....
KingPo Technology Development Limited
|
IEC 60335 Test Finger Probe Kit
|
IEC 60335 Standard Test Probe Kit Electric Safety Check Device List: IP1X Test Probe A IP2X The Standard Test Finger Probe IP3X Test Probe C IP4X Test Probe D IEC60335 Test Probe A Specification: IP1X Probe A /Test Probe A 1, According to: IEC61032:1997 /IEC60529:2001 and UL 2, IP1X Probe A (Test Probe......
Guangzhou Shice Equipment Co., Ltd.
|