Home > Tools & Hardware > Power Tools > Power Screw Drivers >

Iec 60598 1 Luminaires Test Equipment

1-10 Results for

iec 60598 1 luminaires test equipment

from 22 Products

IEC 60598-1 Led Testing Equipment Screwed Glands Torque Screwdriver 1.5-30N.M

IEC 60598-1 Led Test Equipment Screwed Glands Torque Screwdriver 1.5-30N.M Standards & Clauses: IEC 60598-1 “Luminaries-Part1: General requirements and tests” clause 4.12.5 Product overview: The screwed glands tester match the requirements of IEC60598-1:......

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

IEC 60598 1 Light Testing Equipment

...-1 clause 4.14.3. The adjustment device, equipped with the appropriate cable or cord shall be operated in accordance with following table. A cycle of operation is a movement from one extreme of the range to the other and back to the starting position....

Dongguan Kingpo Technology Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

Luminaires Testing Equipment IEC 60598-2-21 Binding Appratus For Rope Light

... Testing Equipment IEC 60598-2-21 Binding Appratus For Rope Light IEC 60598-2-21 21.7 Binding Apparatus for Rope Light Overview of equipment: The lamp twine rope winding test device is made to meet the test requirements of Chapter 6.14 of IEC 60598-2-......

SKYLINE INSTRUMENTS CO.,LTD

Address: No.1802 Room 6# Building Universal Commerce Center Nancheng District Dongguan Guangdong China

IEC 60065 Audio Video Test Equipment / Spring Operated Impact Hammer

IEC 60065 Spring Operated Impact Hammer Standard: IEC 60068-2-63, IEC 60068-2-75 test Ehb, IEC 60335-1, IEC 60598-1, IEC 60950, and IEC 60065 Application: This device is intended to test the impact resistance to shell, operating arm, handle, knob, ......

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

IEC 61851 Electrical Safety Testing Equipment Potential Equalization LCD Method

IEC 61851 Electric Vehicle Potential Equalization Test Equipment Complied Standards & Clauses IEC 61851 Electric vehicle conductive charging system IEC 60335 Household and similar electrical appliances IEC60598 Luminaires-Part 1: General requirements and test IEC60950 Information technology equipment ... Equipment Overview 1. The basic accuracy is 1%, and the test......

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

IEC 60598-1 clause 9.2 expanded metal spacer , Tests for ingress of moisture

IEC 60598-1 clause 9.2 expanded metal spacer , Tests for ingress of moisture Conform to IEC 60598-1 clause 9.2 Where connection is made by a plug or a similar device, then this shall be regarded as part of the complete luminaire and shall be included in the tests and similarly for any separate controlgear. For tests of 9.2.3 to 9.2.11, a fixed luminaire intended for mounting with its body in contact with a surface shall be tested......

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

High Accuracy Light Testing Equipment IEC 60598 1 Lamp Caps Test Sample

Test Gauges for Lamp Caps and Holders HDJ0001 Standard: IEC 60598-1: Luminaires - Part 1:General requirements and tests; IEC 60061-3: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges Application: These gauges are for the control of interchangeability and safety of lamp caps and holders. Test......

shanghai kerang technology co ltd

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

Ground Recessed Luminaires Led Testing Equipment

... Max. load 20KN Rubber punch diameter 50mm, thickness 50mm Maintain time 5-10s for torque test, 1min for static load test Station 1 station Standard IEC 60598-2-13 Clause 13.6.1, 13.6.2 Control Mitsubishi PLC Display Touch screen Production introduction:...

Guangzhou Shice Equipment Co., Ltd.

Address: #1,chencongxi10xiang,chencongcun,qiaonanjiedao,panyu,Guangzhou

Clip Mounted Luminaires Test Device IEC60598-1 Clause 4.14.1 10mm Thickness

... for the pull force test of clip-mounted luminaires. Test requirements: 1). A pull is applied on the cable without jerk for 1 min in the most unfavourable direction in normal use. During the test the clip is mounted on standard test "shelves" made of...

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

Vibration Test equipment Complies With IEC 60068-2-6 and IEC 60598-1 Standards

Vibration Test equipment Complies With IEC 60068-2-6 and IEC 60598-1 Standards Vibration Test Equipment Manufacturer : Labtone Test Equipment Vibration Test Equipment standards : MIL-STD, DIN, ISO, ASTM, IEC, ISTA, GB, GJB, JIS, BS etc. Model EV340 EV350 ......

Labtone Test Equipment Co., Ltd

Address: B1, No.6, Yanhai Road, Chongtou District, Chang'an Town, Dongguan City, Guangdong Province, China

Submit your “iec 60598 1 luminaires test equipment” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Labtone Test Equipment Co., Ltd Products: Vibration Test equipment Complies With IEC 60068-2-6 and IEC 60598-1 Standards
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “iec 60598 1 luminaires test equipment” inquiry

*From:
Your email address is incorrect!
To: Sinuo Testing Equipment Co. , Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0