IEC 60695 Needle Flame Test Apparatus For Electronic Components
|
...Glow-Wire Test (IEC 60695-2-10/11) to assess ignition resistance under overheating, Flame Tests (50W/500W and Needle Flame) for material flammability, and Horizontal/Vertical Burning Tests (IEC 60695-11-10) to classify flame-retardant ratings (e.g., V-0,...
Chongqing gold mechnical and electrical equipment Co., Ltd
|
Electronic Product Flame Test Apparatus , IEC 60695 Needle Flame Test Chamber
|
Electronic Product Flame Test Apparatus , IEC 60695 Needle Flame Test Chamber Introductions Needle Flame Test Chamber is used to test the resistance of fire caused by an interior fault such as leakage current in cable & wire and the like. It meets the ......
SKYLINE INSTRUMENTS CO.,LTD
|
Iec 60695 Needle Flame Combustion Tester
|
...-2-2 (March 1994). The needle flame test apparatus uses a needle burner of specified size (Φ0.9mm) and a specific gas (butane or propane). It is directed at the test specimen at a 45° angle for combustion. The ignition hazard of small flames caused by...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
IEC 60695 Needle Flame Flammability Testing Equipment Automatic 800VA
|
Needle Flame Tester Testing Machine Wire And Cable Burning Resistance Requirements: Faults in the product such as fault currents flowing through the leakage path, overheating of components or parts, poor contact, etc. may cause a flame, which may then be ......
DONGGUAN YUYANG INSTRUMENT CO.,LTD
|
Needle Flame Test Equipment
|
...IEC 60695 Automatic Ignition Needle Flame Testing Machine for Electronic Parts Usage: Electrical and electronic products due to the use of the process of failure: such as electronic components or electronic parts of the poor contact with overload, fault current and other reasons, it may cause a fire, this instrument is to simulate the electrical and electronic products in the fault conditions under the fire caused by a small flame......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Needle Flame Test Equipment / Button-Control Needle Flame Tester
|
Needle Flame Testing Instrument Product Description This instrument simulates small flames generated under fault conditions (e.g., leakage currents, component overheating, poor contacts) to assess fire hazards. Needle Flame Testing Instrument is ......
Hai Da Labtester
|
AC 220V 50Hz Needle Flame Test Equipment For Non Metallic Materials
|
Needle Flame Testing Machine Combustion Test Equipment The needle flame testing machine is designed and manufactured according to the corresponding requirements of IEC60695-2-2, GB5169.5-97, GB4706.1-98, and is suitable for the flame resistance test of non......
Shanghai Glomro Industrial Co., Ltd.
|
Electrical Control Needle - Flame Test Equipment For Flammability Testing Button Operation Air Vent
|
... of the relevant standards IEC60695-11-5, the needle-flame tester is the special instrument used for the fire hazard test of the small flame caused by the fault conditions in the simulating technology assessment equipment. It is applicable to the...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60695 Needle Flame Test Equipment with Stainless Steel Needle Burner
|
Needle flame tester by IEC60695-2-2 Introduction Needle Flame Tester is designed according to international standards IEC60695-2-2 and IEC60695-11-5.The instrument applies for lighting, low-voltage electrical equipment, household appliances, electrical ......
Advanced Instruments Co.,Limited
|
Automatic Control Needle Flame Test Equipment Independent Exhaust
|
Needle-Flame Tester Parameters: ParametersModel NF-1 NF-2(Touch screen) Working voltage 220V/50Hz 220V/50Hz Control operation mode Electrical control, button operation PLC control, 7 inch color touch screen operation, with infrared remote control Combustor......
shanghai kerang technology co ltd
|