IEC 60884-1 Torque Test Device for Plug Socket Cord Anchorage Cable Sheath Wear Test
|
... of plug and socket cable connections, especially focusing on the strain relief area. It fully complies with multiple international standards, including IEC 60884-1:2006 clause 23.2, IEC 60335-1 clause 25.15, and VDE 0620 table 18....
Sinuo Testing Equipment Co. , Limited
|
IEC 60884-1 Impact Testing Equipment Pendulum Hammer Test Apparatus With Multi Height Of Fall
|
... and IEC60884-1fig22-26. It is used for the mechanical strength test of households and similar use of plug sockets, electrical accessories like switches and shrouds, etc. Standard of Impact Testing Equipment: IEC 60884-1: 2022 Plugs and socket-outlets for...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60884-1 Figure 13 Device for Checking the Resistance to Lateral Strain
|
IEC 60884-1 Figure 13 Device for Checking the Resistance to Lateral Strain Lateral Strain Test Apparatus Product details: The appliance conforms to the standard of IEC60884-1 clause 13.14 figure 13. It is suitable for checking socket which rated ......
HK LEE HING INDUSTRY CO., LIMITED
|
IEC 60884-1 Figure 14 Device for Testing Non-Solid Pins to Verify the Mechanical Strength
|
... to check the mechanical strength of non-solid pins of plugs and portable socket-outlets. A force of 100N is exerted on the pin which is supported as shown in IEC60884-1 figure 14, for 1min in a direction perpendicular to the axis of the pin, by mean of a...
Pego Electronics (Yi Chun) Company Limited
|
IEC62196 Electric Vehicle Charging Interface Insertion Force Test Device
|
...Force Test Device Complied Standards & Clauses for Charging Interface Insertion Force Test Device IEC 62196-1:2020 clause 14.1.5, 14.1.6, fig13, fig14. IEC 62196-1:2014 clause 17.2. Technical Parameters for Charging Interface Insertion Force Test Device Test......
Sinuo Testing Equipment Co. , Limited
|
IEC 60884-1 Waterproof Test Equipment Natural Circulation Heating Cabinet
|
... insulating materials such as: wire and cable sheathing, heat shrinkable tube, rubber test or PVC materials, and the insulating components, or use for drying, baking, heat treatment and so on Test sample: polymer materials, wire and cable sheathing,...
shanghai kerang technology co ltd
|
Adhesive Force Test Device for Hot Dip Galvanizing Coating
|
Adhesive Force Test Device for Hot Dip Galvanizing Coating Product details: This test device confirms to the standard of YDT757 drop hammer test way. It’s suitable for the adhesive force test of hot dip galvanizing coatings. During the test, the free ......
Dongguan Kingpo Technology Limited
|
IEC 60884 6 Stations Temperature Rising Test Device
|
.... It is applicable to the temperature rising of electronic accessories in working position. Technical parameters: Item TR-1 TR-2 TR-3 Working station 6 6 6 Testing current 0-40A 0...
Guangzhou Shice Equipment Co., Ltd.
|
IEC 60884 100mm Torque Disc Flexing Cable Torque Tester
|
...Part 1: General requirements’ clause 23.2 Application: This device is used for testing the wear resistance ability of flexing cable with protective sheath of plug, portable socket-outlet, fixed accessories with conductor and connectors, not ......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 60884-1 Fig 18 and Fig 19 Verification Force Plug Socket Test Apparatus
|
|
IEC 60884-1 Fig 18 and Fig 19 Verification Force Plug Socket Tester Apparatus Product details: This Tester is designed to meet the exacting requirements of major international standards such as IEC 60884-1 Fig 18 and Fig 19. It is used to test whether the maximum force of pulling the plug from the socket and the minimum force......
KingPo Technology Development Limited
|