BS 6853 IEC 61034 Smoke Density Tester Part 1 Three Cube Meter 3m3 Cable
|
...IEC 61034 Smoke Density Tester Part 1 Three Cube Meter 3m3 Cable Introduction: 3 Meter Smoke Density Tester is the testing equipment measuring the smoke generated when the cable or optical cable is placed horizontally and burn under definite fire resource in the specified condition (3m3 chamber required by IEC61034). This equipment is important to measure the smoke generation from the value of light source penetration through the smoke...
Dongguan HOOHA Electrical Equipment Company Limited
|
IEC 61034 3 Meter Cube Smoke Density Tester Wire And Cable Testing Equipment
|
...measurement of the smoke density of cables or optical cables. The system is in accordance with the new GB/T17651 and IEC61034 standards. The measuring principle of this test instrument is Lambert-Beer law. The smoke density is expressed by measuring the...
Chongqing gold mechnical and electrical equipment Co., Ltd
|
Horizontal Burning Smoke Density Tester L3000 * W3000 * H3000 Mm IEC 61034 GB/T 17651
|
IEC 61034 GB/T 17651 Cable and Wire Horizontal Burning Smoke Density Tester Application: Cable Burning Smoke Density Tester, to determine the smoke density of cables burning under defined conditions. This smoke density tester is used for horizontal burning of a cable or fiber optic cable, the smoke that is released from the flame combustion or no flame combustion condition, the light transmission rate of smoke......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
IEC 61034 Lab Flammability Tester Smoke Density Testing Machine For Cable
|
IEC 61034 Smoke Density Measuring Device for Cable Optical Cable Burning Test Machine 1. Introduction It meets the requirements of GB/T17651.1~2 and IEC61034-1~2 “Determination of Smoke Density of Burning Cables or Fiber Optic Cables under Specific Conditions” Part 1 “Test Equipment” and Part 2 “Test Procedures and Requirements”. Measurement of smoke density......
DONGGUAN LONROY EQUIPMENT CO LTD
|
IEC 61034 BS6853 27 Cube Meter Cable Smoke Density Tester
|
IEC61034 BS6853 27 Cube Meter Cable Smoke Density Tester Introduction: The IEC Cable Smoke Density Tester is used for measuring the emission when the cable or optical cable is placed horizontally under the definite fire condition. The equipment comprises......
Delta Technology (Chongqing) Co., Ltd.
|
Cable Flame Test of Wire Smoke Density Tester For Horizontal Burning Test Instrument
|
Cable Flame Test of Wire Smoke Density Tester For Horizontal Burning Test Instrument Model:5707 1.)Standard:IEC 61034,BS 6853,GB/T17651.1~2 2.)Container size(mm):3000*3000*3000 3.)Inner container material:SUS304 stainless steel 4.)Inner filler:calcium ......
Suzhou Yangyi Vouch Testing technology Co.,Ltd
|
Building Materials ASTM D2843 Smoke Density Tester For Assessment Of Density of Smoke
|
...Smoke Density Tester for Assessment of Density of Smoke Product Introduction ASTM D2842 Specifies the apparatus and methods of test for the assessment of density of smoke from the burning or decomposition of plastics. Smoke density tester can measure the smoke density......
SKYLINE INSTRUMENTS CO.,LTD
|
NBS Smoke Density Chamber/Plastic Smoke Density Tester/Burn in Testing Machine with ASTM E662
|
... products. It evaluates the density of smoke by measuring the loss of light flux in the test chamber, thereby helping to evaluate the combustion performance of the material. Technical Parameters Model HD-R909 Measuring range 0.0001-100%; (Smoke density)...
Dongguan Haida Equipment Co.,LTD
|
NBS Smoke Density Chamber/Plastic Smoke Density Tester/Burn in Testing Machine with ASTM E662
|
|
... products. It evaluates the density of smoke by measuring the loss of light flux in the test chamber, thereby helping to evaluate the combustion performance of the material. Technical Parameters Model HD-R909 Measuring range 0.0001-100%; (Smoke density)...
Hai Da Labtester
|
DX-8368 Plastic Smoke Density Tester
|
...Smoke Density Tester Plastic combustion smoke density tester is a new type of testing equipment for measuring smoke density developed according to the technical conditions specified in the standard GB/8323.2-2008 and ISO5659-2 "Plastic Smoke Generation Part 2 Test Method for Determining Smoke Density by Single Chamber Method", these standards are suitable for determining the specific optical density of smoke......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Submit your “iec 61034 smoke density tester” inquiry in a minute :