IEC 62196-1 Test Apparatus For Checking Damage To VE Conductors with 10Rpm
|
IEC 62196-1 Test Apparatus For Checking Damage To VE Conductors with 10Rpm 1. Introduction of apparatus for checking damage to VE conductors: The apparatus for checking damage to EV conductors is designed to meet the test requirements of IEC62196-1 clause 13.3 figure 12, IEC60884-1:2022 clause 12.2.5 and figure 13, IEC60669-1 clause 12.2.5 and figure 9, IEC62052-31 clause 6.9.7.3 (for flexion test). The apparatus......
Pego Electronics (Yi Chun) Company Limited
|
IEC62196 Single Station Misalignment Test Apparatus For Electric Vehicle Accessories
|
... rise test, immediately following temperature stabilization, the accessories are subjected to external mechanical loads as illustrated in Figure 18. Using a force gauge, ......
Sinuo Testing Equipment Co. , Limited
|
IEC62196-3 Electric Vehicle Charging Interface Misalignment Test Apparatus
|
...Misalignment Test Apparatus Complied Standards & Clauses For Charging Interface Misalignment Test Apparatus This misalignment test apparatus conforms to IEC62196-3 clause 36.3, figure 18. Equipment Overview For Charging Interface Misalignment Test Apparatus Samples and Limits: Charging Interface. Test......
Sinuo Testing Equipment Co. , Limited
|
IEC 62196-1 Test Plug Gauge Of Vehicle Connector Withdrawal Force Test Die Steel
|
Product Description IEC 62196-1 Test Plug Gauge Of Vehicle Connector Withdrawal Force Test Die Steel Product Overview: The Test Plugs Are Required By IEC 62196-: 2022 Clause 14.1.5, 14.1.6, According To The Relevant Standard Sheets, Shall Have Finely ......
KingPo Technology Development Limited
|
IEC 60335 Tracking Test Apparatus CTI Comparative Tracking Index Tester Apparatus
|
|
IEC 60335 Tracking Test Apparatus CTI Comparative Tracking Index Tester 1. Reference standard IEC60335, GB4706.1, IEC 6084-1, GB2099.1, GB/t4207-2003, IEC 60112. 2. Technical specifications This product is used for electrical products affected by damp and ......
DONGGUAN LONROY EQUIPMENT CO LTD
|
IEC 60068-2-75 Impact Testing Machine Spring Hammer Test Apparatus 0.2J Energy
|
... apparatus. And other standard such as IEC 60335-1, IEC60884-1, IEC 60598-1, IEC60065-1, IEC 62368-1 and etc. When is an impact test appropriate? An impact test is appropriate for equipment likely to be used in areas with non-restricted access and where...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Household Appliance 7 Inch Fire Hazard Needle-Flame Test Apparatus IEC 60695-11-5
|
... wire test equipment, hot wire ignition test machine and etc.. The new version PLC control 7 inch needle-flame tester is designed and manufactured according to the standard requirement of IEC60695-......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60811-504 2012 Mandrel Test Apparatus & Impact Test Apparatus
|
... or round insulated cores at low temperature. The manual low-temperature impact test device is used to measure the samples of wire and cable insulation and jacket, plugs and sockets, insulating electrical sleeves and accessories for construction. After...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
AC220V 50HZ Power Cord Flexing Test Apparatus With Digital Display
|
...Adjustable Bend Angle Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a ......
Dongguan Kingpo Technology Limited
|
IEC60598-1 Luminaries Test Equipment Direct Plug In Test Apparatus
|
... of the plug-in device with plug-in pin on the socket during normal use is within the specified range. Compliance: It is suitable for testing the torque exerted on the output socket by the device which is to be inserted into the fixed output socket and is...
SKYLINE INSTRUMENTS CO.,LTD
|
