IEC60884 Power Cord Flexing Test Apparatus
|   | 
                                            ...Test Equipment Power Cord Flexing Tester Standard: IEC 60884-1 2013 ‘Plugs and socket-outlets for household and similar purposes -- Part 1: General requirements’ clause 23.4 and figure 21 Application: This device is used for test the flexing properties of non-rewirable plugs (terminals) and non-rewirable portable socket-outlets, check the fatigue strength of the power cable and jacket. Plug Socket Test......                                         
                                            HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
                                         
 | 
Heat Resistance 20N IEC60884 Ball Pressure Test Apparatus
|   | 
                                            Fig37 20N Heat Resistance Test Ball Pressure Test Apparatus IEC60884 Product details: The Ball Pressure Tester conforms to many standard requirements like IEC60884-1, IEC60950 and so on. It is used for testing the heat resistance of the electrical ......                                         
                                            Guangzhou Shice Equipment Co., Ltd.
                                         
 | 
UL817 Power Cord Testing Equipment DC Line Bending 10 - 100 Times / Min
|   | 
                                            ... cord common safety requirements" requirement. Applicable to the manufacturer and the goods seized the electrical products on the power cord, DC line bending test. This test machine is divided into electrical testing and load testing two test methods. By...                                         
                                            Guangzhou Kinte Electric Industrial Co.,Ltd
                                         
 | 
IEC60884-1 Table 18 Electrical Safety Test Equipment Power Cord Anchorage Torque Test Apparatus
|   | 
                                            ... clause 23.2 table 18. It’s used to test the power cords and cables for household appliances. Parameters: 1. Torque disk diameter: 100mm 2. Weight: equipped with 2N, 3N 5N, 7N, and 8.5N ......                                         
                                            Pego Electronics (Yi Chun) Company Limited
                                         
 | 
IEC60884 Figure 20 Apparatus For Testing Cord Retention / Cable Retention Test Apparatus
|   | 
                                            IEC60884 figure 20 Apparatus For Testing Cord Retention / Cable Retention Test Apparatus Product details: The cable retention test apparatus is designed and manufactured according to the standard requirement of IEC60884 figure 20. It is aim at test cord retention and check the effectiveness of the retention of the cable and cord......                                         
                                            KingPo Technology Development Limited
                                         
 | 
IEC60884-1 120N Cord Anchorage Pull Force And Torque Test Apparatus
|   | 
                                            ... as IEC60884-1:2013 clause 23.2, IEC60335-1:2016 clause 25.15, IEC60745-1:2006 clause 24.14, IEC60598-1:2014 clause 5.2.10.3, IEC60065:2005 clause 16.5, etc. The cord anchorage shall relieve conductors from strain, including twisting, at the terminals and...                                         
                                            Sinuo Testing Equipment Co. , Limited
                                         
 | 
20N Heat Resistance Verification Compression Test Apparatus IEC60884-1 Figure 38
|   | 
                                            ...Test Apparatus IEC60884-1 Figure 38 Product details: This apparatus confirms to the standard requirement of IEC60884-1 figure 38. It is used to test the pressure-resistant properties of the electrical accessories and mounting box under the circumstance of being heated. This testing equipment should be put into use with the heating box. Technical parameters: Standard IEC60884......                                         
                                            Guangzhou HongCe Equipment Co., Ltd.
                                         
 | 
AC220V 50HZ Power Cord Flexing Test Apparatus With Digital Display
|   | 
                                            ...Adjustable Bend Angle Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a supply cord that are moved...                                         
                                            Dongguan Kingpo Technology Limited
                                         
 | 
IEC 60335 Power Cord Twice Tension And Torque Test Apparatus Can Be 120N
|   | 
                                            ...25.15, IEC60065: 16.5, IEC60598: 5.2.11 and other standard provisions. It is used to evaluate power cords, and it is intended to be permanently connected with flexible cords. Perform two tests of tension and torque at the terminals to power cables such as...                                         
                                            Dongguan Zhongli Instrument Technology Co., Ltd.
                                         
 | 
Electric Vehicle Multiple Portable Socket Outlets Mechanical Strength Test Apparatus
|   | 
                                            ... Mechanical Strength Test Apparatus Complied Standards & Clauses IEC 62196-1Ed.4CDV: 2020 "Plugs, Socket - Outlets and Couplers for Industrial and Similar Applications, and For Electric Vehicles" clause 26.3, fig 19. IEC60884-1:2006 "Plugs and socket......                                         
                                            Sinuo Testing Equipment Co. , Limited
                                         
 | 
