IEC61032 Test Finger Probe Test Probe D 35mm Sphere Diameter 1mm Wire Diameter
                                         
                                     | 
                                    
                                         
                                            ... hazardous mechanical parts. It is also used to verify the protection against access with a wire. Test probe D is also used to verify the protection of equipment against ingress of solid foreign objects having a diameter of 1 mm or greater respectively....                                         
                                        
                                            Guangzhou HongCe Equipment Co., Ltd.
                                         
                                        
  | 
                                
IEC61032 Test Finger Probe 1 Diameter 50mm Steel Ball with CNAS Certificate
                                         
                                     | 
                                    
                                         
                                            IEC61032 Test Finger Probe 1 Diameter 50mm Steel Ball with CNAS Certificate Introduction: Designed according to IEC61032 figure 5, meet the requirement of IEC60529-IP. The diameter of the sphere is 50mm+0.05, sphere is intended to verify the degree of ......                                         
                                        
                                            Pego Electronics (Yi Chun) Company Limited
                                         
                                        
  | 
                                
Ф8.6 Children Test Finger Probe 18
                                         
                                     | 
                                    
                                         
                                            IEC61032 Test Finger Probe Children Test Probe 18 Small Finger Probe Ф8.6 Standard: IEC61032 Protection of persons and equipment by enclosures - Probes for verification figure 12 finger probe 18. IEC60335-1 Safety of Household and Similar Electrical ......                                         
                                        
                                            HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
                                         
                                        
  | 
                                
Children Test Finger Probe IEC 61032 Figure 12 Figure 13 Standard
                                         
                                     | 
                                    
                                         
                                            ...Test Finger Probe IEC 61032 Figure 12 Figure 13 Standard IEC61032 Figure 12 Figure 13 Children Test Finger Probe 18 And 19 Product information: Children finger probe HT-I12 conforms to IEC61032 figure 12 finger probe 18, IEC335.1,UL1017 standards. It is used to simulate the children who are older than 36 months and younger than 14 years to test whether the hazardous parts can be touched. Children finger probe HT-I13 conforms to IEC61032...                                         
                                        
                                            Dongguan Kingpo Technology Limited
                                         
                                        
  | 
                                
IEC61032 Children Safety Small Test Finger Probe 19
                                         
                                     | 
                                    
                                         
                                            ... Probe is the necessary appliance to prevent electic shock for household and similar electrical problem Technical Parameters: 1. Knurled Finger Diameter: 5.6mm 2. Knurled Finger Length: 44mm 3. Head Radius: 2.8mm 4. The First Headle Diameter: 25.9mm 5. The...                                         
                                        
                                            Guangzhou Shice Equipment Co., Ltd.
                                         
                                        
  | 
                                
Test Probe 11 , IEC61032-Figure 7 Test Finger Probe , Unjointed Test Finger
                                         
                                     | 
                                    
                                         
                                            ... 4, Dam- board Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1. Aluminium box and carton box, careful and tight package, make sure the ......                                         
                                        
                                            KingPo Technology Development Limited
                                         
                                        
  | 
                                
Children Test Finger Probe 18 and 19 , IEC61032 Jointed Children Test Finger
                                         
                                     | 
                                    
                                         
                                            ...Test Finger Probe 18 and 19 , IEC61032 Jointed Children Test Finger Product information: Children finger probe 18 conforms to IEC61032 figure 12 finger probe 18, IEC335.1,UL1017 standards. It is used to simulate the children who are older than 36 months and younger than 14 years to test whether the hazardous parts can be touched. Children finger probe 19 conforms to IEC61032 figure 13 finger probe......                                         
                                        
                                            HK LEE HING INDUSTRY CO., LIMITED
                                         
                                        
  | 
                                
Long Pin Test Finger Probe 12 IEC61032 Standard
                                         
                                     | 
                                    
                                         
                                            ...Test Probe 12 HT-I08 Standard:IEC61032 figure 8 test probe 12. Application:This pin is intended to be used on appliances for verifying the inaccessibility of hazardous live parts or hazardous mechanical parts which are liable to be touched accidentally by a tool, for example a screwdriver or similar pointed object in normal use. Test......                                         
                                        
                                            shanghai kerang technology co ltd
                                         
                                        
  | 
                                
IEC 61032 75N Test Probe 11 Rigid Finger Probe Anti Shock Test Finger Probe 11
                                         
                                     | 
                                    
                                         
                                            ...IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing or the internal baffle of the housing. Can be ordered with 10~50N thrust. Can be ordered with 10~75N thrust. Test Finger Usage 1. As shown in the figure, the finger portion of the thrust test...                                         
                                        
                                            SKYLINE INSTRUMENTS CO.,LTD
                                         
                                        
  | 
                                
IEC60065 12mm test Finger Probe with 75N Thrust
                                         
                                     | 
                                    
                                         
                                            ... to touch the electronic testing. IEC60065 12mm test finger probe with 75N thrust Nodular Finger Length 80mm Nodular Finger Diameter 12mm Dam-board Diameter 50mm Test Force 15N Standard IEC61032 IEC60065 IEC60335-1 IEC60884-1 Product overview: In line with...                                         
                                        
                                            DONGGUAN LONROY EQUIPMENT CO LTD
                                         
                                        
  | 
                                
