Rustproof Ingress Protection Test Equipment Access Probes
|
...: It is used to indicate the degrees of protection provided by an enclosure against access to hazardous parts, ingress of solid foreign objects. Parameter: It is concluded to the following test probes according to the degree of protection provided by an...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
37° IP2X Water Ingress Protection Test Equipment Finger Probe B
|
... 12.3 Acceptance conditions The protection is satisfactory if adequate clearance is kept between the access probe and hazardous parts. For the test of first characteristic numeral 1 , the access probe 50 mm diameter shall not completely pass through...
Guangzhou HongCe Equipment Co., Ltd.
|
IP1X Figure 1 Ingress Protection Test Equipment , Test Probe A With Force
|
... for anti-electric shock test when equipped with amphenol connector. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer) .The probe whose model number is with "T" is with...
Guangzhou Shice Equipment Co., Ltd.
|
Ingress Protection Testing Equipment Compliance With IEC 60529
|
...Ingress Protection Testing Equipment . List Of Equipment In Compliance With IEC 60529 IEC 60529 Test Equipment . List Of Equipment In Compliance With IEC 60529 No. Items Description 1 IEC 60529 Test Sphere 50mm, IP1X IEC 60529 IP1X Test Sphere 50mm This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access......
KingPo Technology Development Limited
|
New Condition Ingress Protection Test Equipment IEC60529 IP Code Probes Test Probe C / D
|
...Probes Test Probe C / Test Probe D Ship by Express 1. Introduction: IP code probe is a test probe to verify the degrees of protection specified in IEC60529. Test probe C (test rod) is intended to verify the protection of persons against access to hazardous parts, it is also used to verify protection against access with a tool. Test Prod D (test wire) is intended to verify the protection of persons against access......
Pego Electronics (Yi Chun) Company Limited
|
100L Ingress Protection Test Equipment Ice Water Shock Submersion
|
... Standard The Ice Water Shock Submersion Test Equipment is designed and produced as the standard of the ISO 16750-4:2010 5.4.3. Test method Connect the DUT to the test equipment. Operate the DUT in a hot air oven TMAX for the specified holding time,t h...
Dongguan Kingpo Technology Limited
|
Simulation Dust Ingress Protection Test Equipment Environmental Test Chamber
|
...Ingress Protection Test Equipment Environmental Test Chamber Haida IPX1 - IPX8 Rain Test Chamber.pdf Product Description: The Environmental Testing Chamber is designed for sealing performance test and reliability test, widely used in electrical, electronics, automobile, motorcycle, LED and other products. It is suitable for the work ability test......
Hai Da Labtester
|
EN-71-1 ASTM F963 Toys Testing Equipment Accessibility Probes For Sharp Point Test
|
...Testing Equipment ASTM Accessibility Probes Description: Accessibility Probes is used to determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Accessibility probes are designed for two age groups: 1. Probe......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Toys Testing Equipment Alloy ASTM Toys Safety Testing Equipment Accessibility Probes
|
...Accessibility Probes, Toys Safety Testing Equipment Product information To determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Accessibility probes are designed for two age groups: Probe A for 0-36 months Probe......
SKYLINE INSTRUMENTS CO.,LTD
|
IPX1 IPX7 IEC 60529 Test Equipment Water Ingress Protection Test Equipment
|
..., IPX5, IPX6 & IPX7. Equipment Overview Application: To verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under: Water dripping at degree IPX1 and...
Sinuo Testing Equipment Co. , Limited
|
Submit your “ingress protection test equipment access probes” inquiry in a minute :