IEC 60335-2 Test Rod For Interlock Concealment Door Of Microwave Oven
|
...Test Rod For Interlock Concealment Door Of Microwave Oven Standards For Test Rod For Interlock Concealment: The test rod meets the standard requirements of IEC60335-2-25 clause 22.105 figure 101, EN61010-1, UL3101-1, UL3111-1 and CSA1010-1, etc. Technical Parameters For Test Rod For Interlock Concealment: Diameter 3 mm,100mm long, the handle is made of nylon, the rod is hardened steel. Rod......
Sinuo Testing Equipment Co. , Limited
|
Interlock Concealment Test Finger Probe Stainless Steel As Per IEC60335-2-25 Fig 101
|
...Interlock Concealment Test Probe as per IEC60335-2-25 Fig 101 1. Introduction of interlock concelament test probe The interlock concelament test probe is designed according to IEC60335-2-25 clause 22.105 and figure 101, it is applied to microwave oven. 2. Parameter of interlock concelament test probe Diameter of test rod Φ3mm Diameter of handle Φ10mm Length of rod 100mm Standard IEC60335-2-25 3. Figure of interlock......
Pego Electronics (Yi Chun) Company Limited
|
Ф10mm Handle Test Rod For Testing Concealment Of The Reset Button
|
...Test Rod For Testing Concealment Of The Reset Button IEC 60335-2-16 Clause 22.102 Test Rod For Testing Concealment Of The Reset Button Of A Protective Device. Product information: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is used to test concealment of the reset button of a protective device. Appliance is checked by applying a rod......
Dongguan Kingpo Technology Limited
|
Internal Overhead Concealed Door Closer , 3 Hours Fire Rating Hold Open Door Closer
|
...screws adjusting closing and latching speed Internal overhead concealed door closer D30, with stronger spring strength, the closing power is of size 3, suitable for max. internal door width 950mm or door weight 65kg. Normally if the door width is less than...
Zhejiang Dorrenhaus Hardware Industrial Co., Ltd.
|
IEC 60335-2-16 Probe Test Rod For Waste Food Processor
|
...Test Finger Probe Test Rod For Waste Food Processor Standard: IEC 60335-2-16 clause 22.102 ‘Household and similar electrical appliances -safety-Part 2-16:particular requirements for food waste disposers’. Application: It is used to test concealment of the reset button of a protective device. Test......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
MPM support rod MPM safety door support rod, hydraulic rod, hydraulic rod, P60020, P60083
|
...rod MPM safety door support rod, hydraulic rod, hydraulic rod, P60020, P60083 MPM support rod MPM safety door support rod, hydraulic rod, hydraulic rod, P60020, P60083 We also supply the below products: Panasonic CM402 Feida feed front gear n610014407ac kxfw1kw0a01 KIC start 6-channel furnace temperature tester test......
Shenzhen CN Technology Co. Ltd..
|
EN2-4 Fig 1 Aluminium Concealed Door Closer For Wooden Door Glass Doors Weatherproof
|
F6300 Series EN 2 TO EN4 overhead Door Closers Standard Features: Tested to meet BS EN 1634 for Fire assembly. Closing force EN2 to EN4 By adjustable power nut. Needle bearing for high efficiency Cast alumimum body Non handed Standard closing and latching......
Suzhou Fuerda Industry Co.,Ltd
|
Double Safety Interlock For Door Car Brake Hose Autoclave Rubber Vulcanization
|
High Configuration Rubber Curing Autoclave Passed Government Test Automatic Control Ⅰ Product description Full automatic industrial autoclave vulcanizer for rubber sheet are divided into two series: steam vulcanizing boiler series and hot air vulcanizing ......
Luy Machinery Equipment CO., LTD
|
Airtight Interlock Cleanroom Pass Box Transfer Hatch SAS UV Sterilization
|
... interlock,electromagnetic interlock ④ Others Option: Sound and light alarm,Serilizer,Interphone,Conveyor Product Description The dynamic pass box is an auxiliary equipment of the clean ......
Hongkong Yaning Purification industrial Co.,Limited
|
Length 100mm Rod Test Finger Probe With Nylon Handle IEC 60335-2-16
|
Test Rod With Nylon Handle 100mm Product information: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is used to test concealment of the reset button of a protective device. Appliance is checked by applying a rod in any direction to touch the protective device which is in off state. The diameter of rod is 76 mm ±0.1mm and it has a flat end. There shall be a distance of at least 1.5mm between the rod...
Guangzhou HongCe Equipment Co., Ltd.
|
