ISO Standard Drop Tester For Big Package Testing Drop Height Range 2.54-120cm
|
ISO Standard Drop Tester For Big Package Testing Drop Height Range 2.54-120cm Description For large packaging with high mass, the vertical drop height during transport will be low and therefore they need drop test with relatively low drop height. Zero Height Drop Tester is mainly used for drop......
Labtone Test Equipment Co., Ltd
|
CSC FTTH Carbon Steel Standard Drop Wire Hook
|
FTTh Drop Clamp Drop Wire Hook Splint Cable Clamps Description Splint span retractor (Splint Cable Clamps) are used in drop cable installations as an attachment to strand for either accepting the bail of Drop Wire Clamps, or for wrapping the support wire......
Geto telecommunication equipment limited company
|
GB/T243.8 Standard Drop Tester Machine Drop Impact Test Machine
|
Drop Tester Used to evaluate the impact resistance and component damage resistance of products Product Description 1. Drop height range: 300-1500mm 2. Height display mode: digital 3. Drop height error: ±10 4. Drop floor plate medium: steel plate 5. The ......
Dongguan Chengfeng Testing Equipment Co., Ltd
|
DIN 3415 ISO 22777 22776 Adhesive Hook Fatigue Tester Velcro Hook Loop Fastener Fatigue Tester
|
...ISO 22777 22776 Adhesive Hook Fatigue Tester Velcro Hook Loop Fastener Fatigue Tester Introduction The Adhesive Hook Fatigue Tester / Hooked Tape Fatigue Strength Testing Machine is used to test the adhesion ability of the hooked tape (velcro tape) after repeated peeling and adhering actions, and to evaluate whether it meets the standard requirements. Applicable standards DIN-3415, GB/T 3903.20, GB/T 3903.21, GB/T 23315, ISO 22777, ISO...
DONGGUAN LONROY EQUIPMENT CO LTD
|
Large Package Drop Test Machine Zero Height Carton Drop Tester For Packaging Testing
|
...-6713:2002, SNI 8560-1:2018 ISO 16358-1:2013, IEC 60065, SNI 04-6253-2003, etc. Product Overview It is used to assess the degree of impact of drops on packages during actual transportation, loading and unloading, and to evaluate the impact strength of the...
Sinuo Testing Equipment Co. , Limited
|
Stainless Steel Large Drop Tester For Furniture And Packaging ISO Standard
|
...free from certain height Feature Electric drive Weight 2500kg Volume 86×43×80cm Test standard TAPPI-T803,JIS-P8134,GB2679-7 2. Description The Large package drop testing machine is dedicated to testing the product packaging by the fall of the damage, and...
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
IEC 60068-2-32 1m Bluetooth Speaker Controlled Drop Tester
|
... Drop height setting Touch panel setting and display Min release height 300mm Counter 0~999,999 (settable) Air source ≥0.5MPa Tester size W1000xD1180xH2415mm Weight About 420kg Power supply AC220V 50Hz 3A or 110V 60Hz 6A Drop bases Steel,...
Infinity Machine International Inc.
|
Digital Double Swings Drop Testing Machine / Free Falling Drop Tester CE ISO
|
...Drop Testing Machine / Free Falling Drop Tester CE ISO Application: Digital Double Swings Drop Testing Machine / Free Falling Drop Tester is applied to assess the package in the actual transportation, loading and unloading process by dropping the degree of impact, impact-resistant strength and evaluate the reasonable of packaging design. Double Swings Drop......
ASLi (CHINA) TEST EQUIPMENT CO., LTD
|
HME Filter & BV Filter Pressure Drop Tester With Accurate Testing
|
HME filter & BVfilter Pressure drop test equipment with Accurate testing This is the pressure drop testing machine.which use for HME Filter &BV filter &spirometry filter The respiratory system strainer-pressure drop test machine produced by our company is ......
Huizhou Longwangda Technology Co., Ltd.
|
Single Arm Package Drop Tester For Free Fall Test Face , Corner And Edge Package
|
...falling, and to evaluate the impact strength during transportation and handling. Design applicable standards: ISO2248 JISZ0202-87 GB/T4857.5-92 product description: The single-wing drop tester can perform free drop test on the face, corner and edge of the...
Dongguan jie dong test equipment co.,LTD
|