PLC G5/G13 Lampholders Axial Force Test Device Clause 4.4.4 For Fluorescent Lamps
|
...) for fluorescent lamps according to IEC60598-1 clause 4.4.4. It is applied to assess the fixing device of lamhpolder should have adequate mechanical strength so as to withstand rough handling as may be expected in normal use. The test should be checked by...
Pego Electronics (Yi Chun) Company Limited
|
Luminaries Fluorescent Lamp Holder Axial Force Test Device IEC 60598-1
|
... to IEC60598-1 clause 4.4.4 Product Overview For Fluorescent Lamp Holder Axial Force Test Device: It is applicable to axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time 1...
Sinuo Testing Equipment Co. , Limited
|
IEC62196 Electric Vehicle Charging Interface Insertion Force Test Device
|
...Force Test Device Complied Standards & Clauses for Charging Interface Insertion Force Test Device IEC 62196-1:2020 clause 14.1.5, 14.1.6, fig13, fig14. IEC 62196-1:2014 clause 17.2. Technical Parameters for Charging Interface Insertion Force Test Device Test......
Sinuo Testing Equipment Co. , Limited
|
Fluorescent Lamp Holder IEC60598-1 Axial Force Test
|
...Axial Force Tester Technical parameters: Power 220V 50Hz The axial force 15N (bar weight), 30N (superimposed by a 15N vias weight onto the bar) Fixtures V-type fixture, front and back adjustable Holding specimen height range 0-250mm Product information: The test equipment is designed and manufactured according to IEC60598-1 clause 4.4.4 standard test item requirements, test content: axial......
Guangzhou Shice Equipment Co., Ltd.
|
Adhesive Force Test Device for Hot Dip Galvanizing Coating
|
...hot dip galvanizing coatings. During the test, the free dropping hammer is used to hit the zinc coating to test whether the zinc coating confirms to the standard requirement. This item is appropriate for the manufacture factory like the iron tower and the...
Dongguan Kingpo Technology Limited
|
Socket Pull-out Force Test Device Test Plug Roughness ≤ 0.8mm Weight 1 Set Stackable Professional Plug Socket Tester
|
... safety and convenience. As a source manufacturer, we deeply understand the far-reaching impact of every detail on user experience and safety. The HC9916 socket pull-out force test device is like a...
Guangzhou HongCe Equipment Co., Ltd.
|
Tension and Compression Type Force Testing Devices Load Cell IN-LFSMC-A
|
Tension and Compression Type Force Testing Devices Load Cell Load Cell Dimenison Load Cell Dimension Items UNIT TECHNICAL DATA Rated capacities(Emax) t ......
Innovation Electronic Co.,Ltd
|
Test device suitable for checking security of lampholder contacts IEC 60598-2-20-figure 2
|
...The incandescent lamp is removed and a force of 15 N is applied for 1 min to each of the conductors connected. Following this, a force of 30 N is applied for 1 min to the two conductors together. The forces are applied at a distance of 3 ± 0,8 mm from the...
KingPo Technology Development Limited
|
Button Operation Light Testing Equipment Lampholder Normal Operation Test
|
Lampholder Normal Operation Test Device HDJ0006 Standard: IEC 60238 Edison screw lampholders, clause 18 and figure 4 Application: This device is suitable for determination of stability and mechanical properties of the lamp holders. Test sample: Edison screw lampholders......
shanghai kerang technology co ltd
|
RUIJIA OEM 100KN-5000N.M Multi Component Force Sensor Multi Axial Force Sensor RUIJIA Multi Axial Force Sensor IP68
|
...(30min) ±0.1%FS/30min Zero Balance ±1%F.S Safe Overload 300%FS Output 0.5-1.0mV/V Theory Test XYZ Three Axial Force Type China Description multi axial force sensor RUIJIA concentrated on sensor field more than 15 years with rich experience . During the...
Xian Ruijia Measurement Instruments Co., Ltd.
|
Submit your “lampholders axial force test device” inquiry in a minute :