Lampholder Test Gauges IEC60061 3 IEC60238 IEC60399 Reference Standard
|
..., IEC60399 Model Number Gauge Name 7006-25-7 “GO” GAUGE FOR SCREW THREADS OF LAMPHOLDERS E10, E14 AND E40 7006-26-4 “NOT GO” GAUGES FOR SCREW THREADS OF LAMPHOLDERS E10,EP10,EY10,E14,E27,E39 AND E40 7006-30-2 PLUG GAUGE FOR E14 LAMPHOLDER FOR...
Dongguan Kingpo Technology Limited
|
Lampholder Go No Go Thread Gauge Candle Sharped Shaft For Checking Dimensions
|
... of the lampholder screw thread and dimension X shown on sheet 7005-20 Testing: it shall be possible to screw the gauge into the lampholder without using undue force. Not go gauges for screw threads of E14 lamp holders (figure number: 7006-26-4) Purpose:...
Pego Electronics (Yi Chun) Company Limited
|
ANSI C81.63 Threaded Gauge For Testing Lampholders
|
....63-2019 3-179-1Threaded Gauge for Testing Unacceptable Contact-Making in E26d Double Contact-Medium-Screw Based Lampholders Standard:ANSI C81.63-2019 test sample : E26d Double Contact-Medium-Screw Based Lampholders Material:Steel Model:3-179-1...
KingPo Technology Development Limited
|
5/16-24 UNF Threads Plug Thread Gauge for Thread Machining
|
...Threads Plug Thread Gauge for Thread Machining Description: These are inch plug ring gauges are metrology tools that are used for checking threaded or tapped holes, and verify the proper thread type, major diameter, minor diameter, pitch diameter, and pitch of the thread against a mating thread gauge. There are available with different types, including GO thread plug gauges, NOGO thread plug gauge and combination GO/NOGO thread......
Deko Corporation
|
E26 Go And Not Go Gauges , Mold steel Screw Thread Gauge
|
...29L-4 “NOT GO” GAUGE FOR CAPS E26, E26/50x39, E26/51x39 & E26d 7006-29-3 GAUGE FOR TESTING CONTACT-MAKING OF LAMPS FITTED WITH CAPS 7006-29A-2 GAUGE FOR CAPS ON FINISHED LAMPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT E26d 7006-29B-2 GAUGE WITH...
Guangzhou Shice Equipment Co., Ltd.
|
IEC 60061-3 7006-29L-4 E26 No Go Gauge for Caps, E26d Thread Gauge, Not Go Gauge
|
...gauge for caps E26, E26/50x39, E26/51x39 & E26d, 7006-29L-4 Purpose: To check the minimum outside (major) diameter of the screw thread, dimension d, of E26, E26/50x39, E26/51x39 or E26d caps on finished lamps. Testing: When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the central contact shall not project beyond surface X. Only the weight of the gauge......
HK LEE HING INDUSTRY CO., LIMITED
|
Hart 1/4" Thread Gauge Pressure Transmitter 100PSI
|
Pressure Transmitter 0-100PSI, 1/4" Thread Connection 1. Working Principle The pressure of the measured medium directly acts on the diaphragm of the sensor (stainless steel or ceramic). Causing the diaphragm to generate a micro-displacement proportional......
Melan Measurement & Control Instruments (Shanghai) Co.,Ltd.
|
DIN 352 and DIN 223 HSS 32 Pcs Taps and Dies set including M3-M12 taps and Dies with wrench and Thread Gauge and Driver
|
32Pcs DIN352 Hand Taps and DIN223 Die Set Contains: M3-M12 DIN 352 hand taps taper plug and bottom. M3-M12 DIN223 round dies 1 PC tap wrench 1 PC die stock 1 screw driver 1 thread gauge...
Xian Mager Machinery International Trade Co., Ltd.
|
Go And Not Go Gauge Set For UL 496 Clause 5.2.4.2 Compliance Thread Inspection Tool
|
...Gauge Set for UL 496 Clause 5.2.4.2 Compliance Thread Inspection Tool Product Overview For E14 E26 E27 E39 E40 Lampholders Go & Not Go Gauge: The lampholder “Go” and “Not Go” gauges are manufactured according to relative requirements of IEC 60061-3, they are required by UL 496 2013 clause 5.2.4.2. These lampholder gauges are used to check whether the dimensions and shapes of the lampholders......
Sinuo Testing Equipment Co. , Limited
|
SMTB Stainless Steel Liquid Pressure Gauge Black Steel Case G / NPT / Other Thread
|
...Gauge SMTB Black Steel Case G / NPT / Other Thread SMTB Black Steel Case General Purpose Pressure Gauge , SMCB Chromed Steel Case General Purpose Pressure Gauge , SMPB Plastic Case Steel Case General Purpose Pressure Gauge , SMTBS Steel Case Capsule Gauge , SMCBS Steel Case Capsule Gauge . Technical Specification Table GENERAL PURPOSE PRESSURE GAUGE......
Ningbo Sanmin Import And Export Co.,Ltd.
|
Submit your “lampholders threaded gauge” inquiry in a minute :