C60598-1 Clause 4.14.3 Bending Test Equipment For Adjusting Luminaire
|
Bending Test Equipment for Adjusting Luminaire Conforms to IEC60598-1 Clause 4.14.3 1. Introduction The bending test equipment for adjusting luminaire is designed to meet the test requirement of IEC60598-1 clause 4.14.3. The flexible cord or cable of adjusting luminaire shall have no more than 50% of the strands in a conductor be broken and no serious damage to the insulation after continuously bending......
Pego Electronics (Yi Chun) Company Limited
|
Stepless Adjustment Led Testing Equipment Semi - Luminaires Bending Movement Test
|
...luminaires Bending Movement Stepless Adjustment Test Apparatus With 100N Force Gauge Standards & Clauses: IEC 62560-2015 “Self ballasted LED –lamps for general lighting services by voltage>50V-Safety specifications” clause 6.2, table 2 IEC61199 -2014 “single-capped fluorescent lamps –Safety specifications” clause A2.1 IEC 60598-1:2014 “Luminaries-Part1: General requirements and tests......
Sinuo Testing Equipment Co. , Limited
|
Cord Bend Test Equipment / Tensile testing machine 10 - 40 mumbers/min Speed
|
... cable forward to the center of the turnplate. Pull the cable vertically with load at rated bending speed, angle and times then to begin the bending test. When the tester stops automatically, check the jacket damage and the breakage rate of conductors....
Infinity Machine International Inc.
|
3mm Impact Head Bending Test Equipment , CE Welding Bend Test Machine
|
...Bending Test Equipment Application This test equipment is suitable for testing mobile phones, tablets and mobile phone batteries. In the normal daily use of the simulated sample, test the degree of bending and damage to the sample caused by the impact, and use the test result as the basis for improving the strength performance of the product. Principle Place two acrylic round rods at a certain distance horizontally to support the test...
SKYLINE INSTRUMENTS CO.,LTD
|
Paper Cardboard Bursting Strength Tester Corrugated Carton Resistance Analyzer Packaging Compression Bending Testing Equipment
|
... Analyzer Packaging Compression Bending Testing Equipment Product Description The bending stiffness tester is an instrument used to test the bending stiffness of paper and paperboard. It can also be used to test the bending stiffness performance of sheet ......
Guangdong Guangce Instrument Technology Co., Ltd
|
Tensile Compression Bend Testing Equipment 300KN For Metal Materials
|
...Testing Machine , Tensile Compression Bending Testing Equipment 300KN Technical Parameters : 1. Max Test Foce: 300 KN (30Tons) 2. Machine Grade: 1 Class 3. Effective Measure Range: 2%-100%FS 4. Indication Relative Error: ±1% 5. Force Resolution: 1/500000 6. Stress Rate Control Adjustment Range: 1MPa/s~~60MPa/s 7. Stress Rate Control Accuracy: ±2% 8. Deformation Resolution: 1/500000 9. Strain Rate Control Adjustment......
Perfect International Instruments Co., Ltd
|
Automatic Cable Wire Lab Plug Bend Testing Equipment AC 220V 10 ~ 60 times / min
|
...Test Equipment Plug Bend Testing Equipment Application: Automatic Cable Wire Lab Test Equipment Plug Bending Tester is applied for bending endurance test for wire connected with plug. This device is designed and manufactured to meet the requirements of UL817, IEC60884, GB2099. Features: 1. Operated by buttons. 2. When test......
ASLi (CHINA) TEST EQUIPMENT CO., LTD
|
IEC-60794-1-2 Standard Fiber Optic Cable Repeated Bending Test Equipment
|
... Test Equipment: Optical Fiber Cable Repeated Bending Tester is used to determine the ability of a fiber optic cable to withstand repeated bending (cyclic flexing). Optical Fiber Cable Impact Tester Series allows a cable sample to be bent backwards and...
Dongguan Wirecan Technology Co.,Ltd.
|
PTL Ip67 Led Luminaire Ingress Dust Testing Equipment
|
...used for checking the proteced against solid foreign objects to verify the degrees of protection IP5X "Dust-protected" and IP6X "Dust-tight" Test equipment The tests are carried out by means of a PTL dust test chamber with a sealed test cabinet, in which...
Xi'An LIB Environmental Simulation Industry
|
Wh-8801h Bend Test Equipment Swing Tester 45-7200 Degree Rotation Angle
|
..., VDE, CCC, IEC and other relevant standards. Applicable to the manufacturer and the goods seized the electrical products on the power cord, DC line bending test. The main parameters: 1, the...
Guangzhou Kinte Electric Industrial Co.,Ltd
|
Submit your “luminaire adjusting bending test equipment” inquiry in a minute :