Melt Flow Rate Testing Instrument For Plastic Material Flow Rate Analysis And Evaluatio
|
... is a plastic extruder. It works under the specified temperature to melt the sample by using heating furnace. The melted sample flows out a specified hole under the given load. In plastic producing activities, we usually use the melting index to, under...
Beijing Jinshengxin Testing Machine Co., Ltd.
|
KTG113-C On-line Oxygen Analyzer for Building Materials ±1%FS Repeatability and 400 ± 30 ml/min Sample Gas Flow Rate
|
The KTG113-C oxygen analyzer is used for on-line analysis of oxygen content in building materials Introduction The KTG113-C oxygen analyzer is a high-precision on-line detection and analysis instrument for oxygen content in inert gases, developed by our ......
Xi'an Kacise Optronics Co.,Ltd.
|
Ion Chromatography Instrument Analysis Pump Pressure 0-42MPa Power Supply 50-60Hz For Food And Beverage Analysis
|
Technical Paramaters of Ion Chromatography Instrument Product Name IC6200 Ion Chromatography Instrument System Parameters Qualitative repeatability ≤0.5% Quantitative repeatability ≤1.0% Pump System Pump material PEEK Pump flow rate (0.001~10.000) mL/min ......
Anhui Wanyi Science and Technology Co., Ltd.
|
Iso5660-12002 Cone Calorimeter For Testing The Heat Release Rate Of Building Materials
|
...rate of building materials. Standard: ISO5660-1:2002 Technical Parameters Power supply voltage AC220V AC 50Hz Maximum operating power ≥5KW Cone heater power ≤5KW Heat output heat 0~120KW/m2 The maximum placement of the sample box 100mm × 100mm × 50mm Exhaust flow rate 0.012m3/s~0.035 m3/s (adjustable) Timing value resolution 1s error <1s/n Oxygen analysis......
SKYLINE INSTRUMENTS CO.,LTD
|
Customized Central Air-Conditioning Refrigeration Bphe Brazed Plate Heat Exchanger
|
...Exchanger Product Description Analysis of heat transfer efficiency The heat transfer efficiency of plate heat exchangers depends on a number of factors, including plate material, flow path design, fluid properties, flow rate and temperature difference. The......
Baode heat exchanger equipment co.,Ltd
|
Thermostatic Shower Brass Faucet Cartridge 1.6MPA Cu59%
|
OEM and ODM Acceptable Material Brass and copper element Material analysis Cu≥59% Water pressure testing 1.6MPA Air Pressure Testing 0.6MPA Water flow rate Bath/Shower Mixer18-45 L/min Cartridge Life time 300,000 times Open and Close,WRAS CERTIFICATE Body ......
YUHUAN HAOCHENG METALWARE CO.,LTD.
|
Precision Contract Manufacturing Services , Medical Device Contract Medical Manufacturing
|
...: For medical Certificate : ISO 9001/ISO 13485 / ISO 14001 / OHSAS 18001 Description In addition to factors such as tight tolerance, flow rates and wicking capabilities; cleanliness and aesthetics are of paramount importance. For medical device solutions,...
SU ZHOU JENITEK PRECISION DEVICE CO.,LTD.
|
Japanese Servo Motor Plastic Capillary Rheometer , High Temperature And Pressure Load
|
... characteristics of the thermoplastic material, for the production and development of important scientific information and a detailed analysis report is to study the rheological properties of the polymer materials, the shear rate viscosity changes,...
Dongguan Zhongli Instrument Technology Co., Ltd.
|
Submit your “material flow rate analysis and evaluatio” inquiry in a minute :