Multi-position Mobile Manual Release Socket Mechanical Strength Test Device
|
... assembly. Application: Check the mechanical strength of the charging gun cable assembly. Test principle: Use a clamp to fix the sample at a height of 1000mm from the ground and drop it to verify its mechanical strength. Usage environment: Power supply:...
Sinuo Testing Equipment Co. , Limited
|
230V Vertical Hammer 5J Mechanical Strength Test Device Conforms To IEC60068-2-75
|
...5J Mechanical Strength Test Device Product Introduction This vertical impact test apparatus is designed and manufactured according to the standard requirement of IEC60068-2-75 Test Ehc.. It is used to test the enclosure mechanical strength of the household......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 62196-1 Rewireable Plugs and Vehicle Connector Mechanical Strength Testing Equipment
|
...used to test the mechanical strength of rewirable plugs and vehicle connector which is equipped with flexible cable. Test principle is that the free end of the cable and an additional rope or other flexible means, etc., attached to the flexible cable, both...
Sinuo Testing Equipment Co. , Limited
|
IEC 60884-1 Figure 14 Non - Solid Pins Test Device For Mechanical Strength Test Of Pins Of Portable Accessories
|
...ch are not solid, by the following test which is made after the test of clause 21. A force of 100 N is exerted on the pin, which is supported as shown in IEC60884-1, figure 14, for 1 min in a direction perpendicular to the axis of the ......
KingPo Technology Development Limited
|
Blankets Mechanical Strength Test Apparatus IEC60335-2-17 Figure BB.1 To BB.3
|
...Equipment for the mechanical strength test of blankets 1. Introduction The blankets mechanical strength test apparatus is designed according to IEC60335-2-17 clause 21.102 and Annex BB.1 to BB.3. It’s used for mechanical strength test by simulating the ......
Pego Electronics (Yi Chun) Company Limited
|
GJB150 GJB548 Mechanical Strength Test Machine User Friendly Operation
|
...-STD-883E, MIL-STD-810F, ISTA, UL Also meet standard JESD22-B104 (condition B: 1500G, 0.5ms). Shock testing systems Applications:...
Dongguan Kingpo Technology Limited
|
60 G Cone Mass Spring Operated Impact Hammer For Mechanical Strength Test
|
... terms and requirements. Mainly used for household and similar electrical products shell, lever, handle, knobs, lights and other mechanical strength test. Mass of impact: 250 g, cone mass: 60 g, impact energy: 0.2, 0.22, 0.35.0.5, 0.7, 1, 2 (J)...
Guangzhou Kinte Electric Industrial Co.,Ltd
|
Impact Strength Testing Device For Toys Surface Impact Testing With BS EN 71
|
...Strength Testing Device For Toys Surface Impact Testing With BS EN 71 Test Purpose: Reduce the material damage or the danger of imitation toys protection devices as the real face. Application range: Range: imitation protect device (clear material protector, headpiece ,cap, blinker) Comply with Standards: EN 71-1 8.7 impact test......
Dongguan Hust Tony Instruments Co.,Ltd.
|
Resilient Covers Mechanical Strength Test Apparatus
|
...Mechanical Strength Test On Resilient Covers Fig2 BS1363 Technical Parameters: Applied force 230-240N Metal test pressure block R angle of 2.0 to 2.5, width of 25.0 to 25.2 Hardwood block According to BS1363.1-2018 in Figure 2b Product Introduction: The device......
Guangzhou Shice Equipment Co., Ltd.
|
Mechanical Strength Test Equipment Mobile Outlets MO-1 8 Dropping Times
|
...portable socket-outlet which is equipped with flexible cable. Test principle: fix the free end of soft to the wall, the fixed point is of 750 mm height from the ground, grasp the specimen to make the ......
shanghai kerang technology co ltd
|