Multi Channel MEMS 1x8 Fiber Optical Switch Module
|
...Mems Optical Switch Module Multi Channel MEMS 1x8 Fiber Optical Switch Module 1x8 MEMS Optical Switches Module Gezhi Photonics MEMS 1X8 Fiber Optical Switch is a compact, single mode or multimode fiber optical switch configurable for port counts up to 1x64.It utilizes the proprietary microelectromechanical system (MEMS) technology to achieve reliable optical performance and excellent durability; This MEMS optical switch...
Gezhi Photonics (Shenzhen) Technology Co., Ltd.
|
Mini Size 1x8 Opto-Mechanical Optical Switches 8x1 Latching Fiber optic Switch
|
...Optical Switches 8x1 Latching Fiber optic Switch Mini 1x8 Mechanical Optical Switch GEZHI Series Mini 1x8 fiber optic switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. Latching operation preserves the selected optical path after the drive signal has been removed. The switch......
Gezhi Photonics Co.,Ltd
|
Non Latching Fiber Optical Switch 1x1 1260-1670nm Low Insertion Loss 0.5dB
|
optical switch 1x1 A 1260-1670 nm Latching and Non-latching Low Insertion Loss Insertion Loss Typ 0.5dB optical route pins 1×1A Optical Path Electric Drive Sensor Status Pin 1 Pin 2 Pin3 Pin4 Non- Latching Close GND GND OPEN P1- P2 V+ GND CLOSE Latching Close -- -- V+ GND P1- P2 GND V+ -- -- Electrical parameters Voltage current Resistor 5V Latching 4.5~5.5 36~44mA 125Ω 5V Non-Latching 4.5~5.5 26~32mA 175Ω 3V Latching......
Shenzhen Jiangfan Communication Equipment Co., Ltd.
|
20ms 1x8 Mems Fiber Optical Switch Non Latching For OADM OXC
|
MEMS OSW is based on micro-electro-mechanical system (MEMS) technology, which achieved low insertion loss and highly repeatability by rotating the mirror of MEMS chip. MEMS OSW is mainly used in optical cross and connection (OXC) system, optical add/drop system, measure instrument system and optical signal monitoring system.The products are Telcordia GR-1073-CORE qualified, and RoHS compliant. Features: ● Compact size ● Fast switch......
Shenzhen Unifiber Technology Co.,Ltd
|
Latching 1260-1650nm Single Mode 500mW 2x2F Fiber Optical Switch
|
Latching 1260-1650nm Singlemode 2x2F fiber Optical Switch Features Low Insertion loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching Applications Optical Network Protection/Restoration Optical Singnal Routing Configurable Optical......
Shenzhen linkopto Technology Co. Ltd
|
1X1 Channel Fiber Optical Switch Latching Single Mode
|
...Fiber Optical Switch Latching Single Mode Features: 1. Low insertion loss 2. Wide wavelength range 3. Low crosstalk 4. High stability and reliability 5. Epoxy-free optical path 6. Latching and non-latching Application: 1.R&D in laboratory 2.System monitoring 3.Configurable OADM 4.Metropolitan area networks 5.Component testing 6.Fiber sensor Pins Definitions Pins Defining Optical......
HTD Fibercom Co., Limited
|
SC APC Mechanical Latching Fiber Bypass Switch , Multimode 2X2 Optical Switch
|
... an incoming optical signal into a selected output fiber. The 2x2B MM Bypass Mechanical Fiber Optic Switch (2X2B MM Optical Switch) support all wavelength at 850nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well...
Shenzhen HiLink Technology Co.,Ltd.
|
1x2 Mechanical OSW Fiber Optic Switch For System Monitoring
|
...Fiber Optic Switch Introduction Olycom's 1x2 Mechanical Fiber Opitc switch is used to turn on and turn off optical signal. The 1x2 Mechanical Fiber Optic Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical......
Shenzhen Olycom Technology Co., Ltd.
|
Industrial L2+ Managed Fiber Optic Switch 12 Port 1000X SFP + 2 Port 1000X SFP Fiber
|
Fiber Optic Switch Industrial L2+ Managed 12-Port 1000X SFP + 2-Port 1000X SFP Fiber Switch Fiber Optic Switch Advantages ► Support 12x1000Base-X SFP + 2x1000Base-X SFP ► DIP Switch supports one-key VLAN, one-key Ring Management ► Support connecting USB-C port for easy management, without the need to access the RS232 serial port at all ► 10K Bytes Jumbo Frame Fiber Optic Switch......
E-link China Technology Co., Ltd.
|
120km Transmission Network Fiber Optic Switch With -40°C To +85°C Operating Temperature
|
...Fiber Optic Switch is an advanced optical network switch that provides reliable and stable transmission of high data rate signals over optical fiber. It is designed to meet the stringent requirements of next-generation fiber-optic networks. With a maximum data rate of 10/100/1000/10000 Mbps, the Fiber Optic Switch......
Shenzhen Optfocus Technology Co., Ltd.
|
Submit your “mems latch fiber optic switch” inquiry in a minute :