OEM 6 Flute Carbide Square End Mill HRC45 Carbide Endmill 6 mm
|
...: Square End Mill / Ball end mill / Roughing end mill / Mills for Aluminun 6.Workpiece material: Steel, mould steel, low alloy, non-treated steel 7.Coating: TiAlN 8.Tool body material:Carbide Note 1.Non-standard cutting tools available as your sketches or...
INMIND TOOLS CO.LTD
|
CNC Milling Tools Solid Carbide Endmills Tungsten Carbide End Milling Cutter
|
CNC Milling Tools Solid Carbide Endmills Tungsten Carbide End Milling Cutter Tungsten carbide end mill is used for milling, with one or more of the rotary tool cutter.The margin in workpiece is cut by the mill intermittently. Carbide end mill is mainly ......
Dongguan Diamond Hardware Factory
|
CNC Micro Square End Mill Cutter Finishing Endmill Tungsten Carbide
|
...°-45 ° Diameter of cutting edge 0.2-0.9mm; 1-20mm Size Diameter 1.0mm-20mm standard and non-standard. Cutting Form Square,Ball nose, Corner Radius, Taper Flute, etc. Type of flute 2/3/4/6 • Professional Manufacturer for...
Supal (Changzhou) Precision Tools Co.,Ltd
|
Carbide Tool Supply Tungsten Carbide Endmills , Aluminum Steel End Mill
|
...Carbide Tool Supply Wholesale Tungsten Carbide EndMills Aluminum Steel End Mill Feature Dimensionally accurate Stable performance Good wear and corrosion resistance High tensile strength longer functional life Milling cutters/end mills are broadly divided into: 1. Square end mill: finish milling or rough milling, milling grooves, removing a large number of blanks, small-area horizontal plane or contour finishing; 2. Ball end......
ZHUZHOU JINTAI CEMENTED CARBIDE CO., LTD.
|
Shank Chamfeing Square End Mills HRC58 For Cast Iron Milling
|
... that is used to remove material from a metal block to make it into a finishedpart. It is one of the tools used on the milling machine to make a particular type of cut. Endmills are used in millingapplications such as side milling, profiling, face milling,...
ZHUZHOU APPLE CARBIDE TOOLS CO.,LTD.
|
HRC55 Golden Color 4 Flute Long Shank Square End Mill Cutter 1/4 Inch Bronze Coating
|
...Square End Mill Cutter 1/4 Inch Bronze Coating Specification: Name: END MILLS Material: 100% raw material carbide Metrial: Tungsten Carbide Coating: HRC45° HRC50° HRC55° HRC60° HRC65° Flute:1Flute 2Flute 3Flute 4Flute 5Flute End Mills About Coatings: Endmill......
JOINT CARBIDE CO., LTD.
|
3 Flute Carbide Square End Mill Slot Milling Cutter HRC65 Tool For Aluminum
|
... Carbide Flat Endmill Square Slot Milling Cutter HRC65 Coating Cutting Milling Tool For Aluminum PRODUCT DESCRIPTION 1. Raw Material: Use tungsten carbide material, good toughness. Widely used in the production and manufacture of integral tools such as end......
Zhuzhou Sanyinghe International Trade Co.,Ltd
|
ZCCCT 4 Flute Carbide End Mill , Square End Mill Cutter Good Wear Resistance
|
...: 30°-45 ° Diameter of cutting edge: 0.2-0.9mm; 1-20mm Diameter of rods: 4-20mm Length: 50-100mm Cutting Form: Square,Ball nose, Corner Radius,...
Benemetal Material Technology Co.,Ltd
|
40 Degree Helix Solid Carbide Square End Mill Bits For Aluminum 1mm For Finishing
|
...Carbide Flat Endmill 1mm Aluminum Cutter for Finishing Product name RLD HRC55 3 flutes 1mm square end mill for Aluminum Size 1×3×50×4D×3F Suitable for Finish Milling Feature Smooth surface finishing without milling mark Flute Number 3 Coating Uncoated Helix angle 40° Co 12% HRA 92.2 TRS Min(N/mm²) 3800 Tolerance Within 0/-0.02mm Processing machine ANCA/ Carbide Raw Material Introduction End......
Changzhou Ruilida Tools Co., Ltd.
|
Solid Carbide 2 Flutes 0.5 Mm Micro Diameter Square End Mill HRC65 2flute Endmill
|
Description OF Micro Diameter Square End Mill Adopting a suitable negative rake angle design that takes into account the strength and sharpness of the cutting edge, while also adopting a large core diameter to enhance the rigidity of the cutting tool and ......
Shenzhen Bwin Precision Tools Co., Ltd.
|
Submit your “metric gp square end carbide endmills” inquiry in a minute :