25mm PM Mini 12V captive low voltage linear Actuator Stepper Motor 24V mini Linear stepping motor for office automation
|
...CW or CCW,the lead screw will go forword or backword. at the same time ,the lead will rotating. motor stepper step angle is 7.5 degree, lead pitch is 0.6096mm, when motor stepper rotate one step, the lead move 0.0254mm This product is a patented product of...
Changzhou Vic-Tech Motor Technology Co., Ltd.
|
20BY45-67 PM Stepping Motor 9 Ohm 20mm 18 Degree Step Angle Stepper Motor For Gearbox
|
...phase, and it’s designed for low driving voltage (around 5V DC). If customers want to drive the motor at higher voltage, we can adjust coil resistance to match it. Also there are two M2 screws on motor’s cap, and they are used for fixing with gearbox....
Changzhou Vic-Tech Motor Technology Co., Ltd.
|
Insulation Strength 100 V AC FOR ONE SEOOND Lead Screw Type M3*P0.5 PM Stepping Motor
|
Product Description: Permanent Magnet Stepper Motor The Permanent Magnet Stepper Motor is an electromagnetic rotating motor that is used to precisely control the movement of machinery and equipment. With its torquing permanent magnet motor, it offers ......
JiuQi Motor (Changzhou) Co.,Ltd.
|
Pm Stepping Motors / Coils 10m/S Magnetic Tensioner
|
Coil Winding Tension Tension Controller Tensioner is a necessary factor for keeping consistent winding accuracy. Selecting better tensioner provides a sophisticated winding machine with best performance. Stabilized tensioner improves winding problems and ......
HANGZHOU QIANHE PRECISION MACHINERY CO.,LTD
|
PM Stepper Motor Driver CCYH-201M 12v-40 VDC 0.5A-1A Drive 2 Phase 4 Phase Stepping Motor
|
PM Stepper motor driver CCYH-201M, 12v-40VDC 0.5A-1A Drive 2Phase and 4 phase Stepping Motor Description: 1. Matched motor: 2 or 4-Phase stepping motor 2. Number of Phase: 2 or 4-Phase 3. No. of Microstep: 2. 4. 8 4. Max.current: 1A/Phase 5. Current ......
Changzhou Junqi International Trade Co.,Ltd
|
15/20PM Series PM Stepper Motor
|
15/20PM Series PM Stepper Motor *Specifications Model No. Step Angle (deg) No.of phase Voltage (V) Current (A) Resistance (Ω) Holding Torque (g.cm) Deent Torque (g.cm) Rotor Inertia (g.cm) Leads Wdg Fig 15BY20L01 18 2 5 0.5 10 27 10 0.3 - a 1 15BY20L02 18......
SHANGHAI DAITTO MACHINERY CO.,LTD
|
20BYJ46 PM Stepper Motor 5 Wire with 15° Step Angle for Air Conditioners 12V/5V DC
|
... • Home appliances: Air conditioners, Electric fans, Projectors,Cameras, Monitors etc. 20BYJ46 Series specifications: Model Voltage(V) Resistance (Ω) Step Angle(1-2P)/(2-2P)...
Changzhou Xingmai Motor Technology Co., Ltd.
|
41mm Length Mini Step Motor Nema14 35x35x41mm 180mN.M For Medical Machine
|
... Motor 2 Phase 180mN.m 0.5A 35x35x41mm Stepping Motor for Medical machine Motor Specifications Step Angel 1.8 ° Fram Size 35 mm Number of Phase 2 Phase Rated Current 0.5A Holding Torque 180 mN.m ......
GUANGZHOU FUDE ELECTRONIC TECHNOLOGY CO.,LTD
|
Hybrid Mini Stepper Motor Nema8 20mm Bipolar Step Motor 180g.cm 300g.cm
|
...Mini Stepper Motor Nema8 20mm Unipolar Step Motor 180g.cm 300g.cm Stepper motors are known for their accurate positioning capabilities and high torque delivery at low speeds, but they require careful sizing to ensure the motor matches the load and application parameters, to minimize the possibility of lost steps or motor stalling. Adding a gearbox to a stepper motor system can improve the motor’s performance by decreasing the load-to-motor...
CHANGZHOU JKONGMOTOR CO.,LTD
|
Nema 14 Nema 11 Nema 8 Hollow Shaft Stepper Motor Micro Mini Stepping Motor
|
... (mH) Holding Torque (g.cm) Rotor Inertia (g.cm²) Motor Length (mm) Leads No. Motor Weight(g) 20HS30-0604 1.8 3.9 0.6 4.5 1.6 180 3.2 33 4 70 Features: 1. Mini size 2. high speed 3. bipolar stepper motor. 4. Revolving speed is stable and the noise is low....
Changzhou Jinsanshi Mechatronics Co., Ltd
|
Submit your “mini pm stepping motor” inquiry in a minute :