DX8221 Flame Retardant Performance Testing Device For Safety Helmets
|
...performance testing standards for safety helmets in GB/T 2812-2006 "Test Methods for Safety Helmets" and GB/T 2811-2007 "Safety Helmets". Mainly used for testing the flame retardant performance of safety helmets, widely used in safety helmet production enterprises, major quality inspection units, and construction engineering testing stations. Test......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
EN ANSI Standard Safety Helmet Puncture Impact Testing Equipment
|
... performance and puncture performance Power AC220V,50Hz Weight 300kg Volume 40×30×210cm 2.Description: Safety Helmet Puncture Impact Testing Equipment is used for detecting helmets impact resistance absorption performance and puncture performance 3....
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
Safety Helmet Drop Impact Test Machine, Safety Helmet Impact Resistance Puncture Tester, Helmet Test Machine (GW-374)
|
...Testing Machine Bending Test Machine High Performance Puncture Testing Machine(GW-374) Brief introduction: According to new national standard GB/T 2812-2006 safety helmet helmet test method development, used to detect the helmet impact resistance performance test (hit) prevention and safety helmet puncture performance testing, a tester contains two kinds of test......
Dongguan Guo Feng Testing Machine Co., Ltd.
|
Safety Helmet 1000mm Drop Height Impact Test Machine
|
Safety Helmet Drop Impact Test Machine Safety Helmet Impact Resistance Puncture Test Apparatus Brief introduction: According to new national standard GB/T 2812-2006 safety helmet helmet test method development, used to detect the helmet impact resistance performance test (hit) prevention and safety helmet puncture performance testing, a tester contains two kinds of test......
Guangdong Aisry Instrument Technology Co., Ltd.
|
NFPA 1971-2007 Fire Helmet Fire Resistance Combustion Test Device
|
... test principle is that under the action of thermal radiation, open fire impacts on various components of fire helmet, and then detects its flame-retardant performance. Performance characteristics 1. The radiation heat source is steel heating pipe. The...
SKYLINE INSTRUMENTS CO.,LTD
|
AISI 6 Point Anti Collision Head Safety Helmet Adjustable Hard Hat 52 To 63Cm Ratchet
|
...safety helmet with head anti-collision design Description of ABS Safety Helmet: Description Well balanced, lightweight ABS shell with a 6-point terylene head- harness. Wide textile sweatband , 4-point chin strap with chincup to always ensure correct positioning. Ratchet easy adjustment for sizes from 52 to 63 cm. Pass the -30℃ extremelv low temperature impact test. Good electric insulation performance......
FUTURE TECH LIMITED
|
Drop Height 1000mm Safety Helmet Resistance Puncture Impact Testing Equipment
|
...: tempering treatment, ultraviolet irradiation pretreatment, water treatment, the above requirements can be pre-integrated with the A705 pretreatment tank helmet shock absorption performance test methods: the height of the drop hammer 1000mm ± 5mm;...
Dongguan Zhongli Instrument Technology Co., Ltd.
|
IEC 60335-2 Helmet Type Hairdryer Operation Testing Device With Wooden Sphere
|
... the requirements of IEC60335-2-23:2003 "Household and similar electrical appliances-Safety-Part2-23:Particular requirements for appliances for skin or hair care" clause 3.1.9 and figure 101. A dull black-painted wooden ......
Sinuo Testing Equipment Co. , Limited
|
Safety Helmet Shock Absorption And Penetration Tester , Helmet Lateral Rigidity Tester
|
...safety helmet shock absorption and penetration tester 1. introduction This testing machine, meets with test method GB/T 2812, is mainly used to measure and determine properties of shock absorption and penetration resistance of safely helmet. It is widely used inthe areas of supervision and inspection station of special personal protective devices, building research institute, testing......
Jinan Wang Te Bei Equipment Co., Ltd.
|
IEC60598-1 PLC Control Suspended Luminaire Torque Test Device with 5Nm Torque Range
|
...h IEC60598-1 clause 4.14.1 (test B), focusing on evaluating the safety performance of mechanical suspension devices for rigid suspension luminaires under constant torque forces. Below is a detailed breakdown of its core functions, technical features, and...
Pego Electronics (Yi Chun) Company Limited
|
Submit your “performance testing device for safety helmets” inquiry in a minute :