Figure 2.8 Plug Socket Tester Pin Bending Test Apparatus
|
...Pin Bending Test AS / NZS 3112 Figure 2.1 dimensions of plugs Figure 2.2 apparatus for flexing test Figure 2.3 form of pin Figure 2.4 dimensions of insulation on insulated live pins Figure 2.5 pressure test apparatus for insulation on insulated plug pins at high temperature Figure 2.6 impact test apparatus for insulation on insulated plug pins at low temperature Figure 2.7 abrasion test apparatus......
Guangzhou Shice Equipment Co., Ltd.
|
IEC62196-1 Clause 26.4 EV Plug And Vehicle Connector Cable Bending Test Apparatus For Flexing Test
|
... to IEC62196-1 clause 26.4 figure 20 and table 14, it is applied to do mechanical load flexing test of the non-rewirable accessories of ev plug and vehicle connector. Test method: The sample is fixed to the oscillating member of the apparatus so that at...
Pego Electronics (Yi Chun) Company Limited
|
Insulation Sleeves Of Plug Pins Abrasion Test Apparatus Single Station Load 4N
|
...Pins Abrasion Test Apparatus Single Station Load 4N Standard of Insulation Sleeves Of Plug Pins Abrasion Test Apparatus: IEC 60884-1 2013 clause 24.7 and figure 28, BS1363-1 figure 9 Application of Insulation Sleeves Of Plug Pins Abrasion Test Apparatus: This device is use for test the abrasion resistance strength of insulation sleeve of plug pins Feature Insulation Sleeves Of Plug Pins Abrasion Test Apparatus......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 60702-1 Clause 13.6 Electric Vehicle Cables Bending Test Apparatus
|
... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to ......
Sinuo Testing Equipment Co. , Limited
|
IEC 60227-1 Cable Testing Equipment Bending Test Apparatus With 60 Per Minute Flexing Rate
|
... of cord of appropriate length shall be fixed in the apparatus as shown in figure 2, and loaded with a weight having a mass of 0,5 kg. A current of about 0,1 A shall be passed through the conductors. The sample shall be bent backwards and forwards in a...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60702-1 Clause 13.6 Bending Test Apparatus For Mineral Insulated Cables
|
...IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to ......
Sinuo Testing Equipment Co. , Limited
|
IEC 60598-2-21 Figure 2 Cold Bend Test Apparatus To Measure Dynamic Bending Performance Of Wire And Cable
|
...Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer diameter less than or equal to 12.5mm round wire and cable or round insulated wire core is the wire and cable industry to test the bending......
KingPo Technology Development Limited
|
IEC60851-3 Bending Test Apparatus For Flat Wires With Test Bars
|
...bending test apparatus is applicable to the bending test of various enameled flat wires, paper wrapped flat wires, glass fiber wrapped flat wires, film wrapped wires and other electromagnetic wires with a wide edge of less than or equal to 16mm, as well as the corresponding copper and aluminum flat wires. Major Technical Parameters Bending......
Advanced Instruments Co.,Limited
|
Insulation Sleeves of Plug Pins Abrasion Test Apparatus IN-1
|
... to test the abrasion resistance of the insulating bushing of the bolt. This device comprises a horizontally disposed beam, which is pivoted about its centre point. A short length of ......
shanghai kerang technology co ltd
|
Hydraulic Construction Material Testing Equipment Bending Test Apparatus
|
... stretching, compression, bending, shearing and other tests. Applicable standards: meet relevant test standards such as GB / T228.1-2010, ISO, ASTM, etc. Features: 1. The testing machine adopts four-column, double-space frame structure, which has the...
Chengdu Recen Technology Co., Ltd.
|
Submit your “pin bending test apparatus” inquiry in a minute :