Scratch Resistant Pin Electric Safety Testing Probes IEC60335-1 Clause 21 Electrical Solid Insulation
|
...Pin Electric Safety Testing Probes Product information: The test pin is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-1 clause 21. Test method: make sure the angle between the pin and the surface of the sample is 80-85°. Then use the pin......
Guangzhou HongCe Equipment Co., Ltd.
|
Scratch Resistant Pin Electrical Safety Test Probe of IEC 60335-1
|
...standard requirement of IEC60335-1 clause 21. Test method: Make sure the angle between the pin and the surface of the sample is 80-85°. Then use the pin which is loaded with the axial force of 10±0.5N to scratch the surface of the sample at a speed of...
HK LEE HING INDUSTRY CO., LIMITED
|
IEC60335 Electrical Safety Testing Probe Pin For Scratch Resistance Test
|
...Electrical Safety Testing Probe Pin For Scratch Resistance Test IEC60335-1 Clause 21 Scratched Pin For Scratch Resistance Test Of The Electrical Solid Insulation Surface Product information: The test pin is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-1 clause 21. Test method: make sure the angle between the pin......
Dongguan Kingpo Technology Limited
|
Short test pin,test probe pin,safety test probe,quality safety test probe
|
... is made of stainless steel with a plastic handle. Meets IEC 60950 and 61032, Figure 9 (Test Probe} Model TP12 Short test pin Used to test accessibility through enclosure openings per IEC, EN, UL and CSA Standards. Body is plastic, tip is stainless steel....
ALLIED TESTING (HK) CO.,LTD.
|
AC40-50V IEC Test Equipment , Electrical Safety Testing Equipment
|
... with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected with the energized part of the electrical appliance and the high potential is connected with the input terminal of the...
KingPo Technology Development Limited
|
IEC61032 Children Test Finger 19 Safety Test Probe Test Finger
|
...Test Finger 19 IEC61032 Children Test Finger 19 Article NO.:BND-19 Specification: Children Test Finger / Children Test Finger19 1, According to : IEC61032-1997 Fig12 and Fig.13 / EN71 ASTM F963 and UL 2, Children Test Finger 19 Probe is the necessary appliance to prevent electric shock for household and similar electrical......
HongKong Bonad Technology Limited
|
Electrical Multimeter Test Probes Gold Plate Wire Pen Cable Red + Black
|
...Test Probes For Digital Multi - Meter Features Probe Pen length 148mm/Probe Pen nib Ø2mm Probe Pen plug: Ø4mm cross plug, Right angle Probe Pen Wire: 20AWG, length 1000mm, Red/Black Safety Rating: EN61010-031, 1000V CAT. Ⅲ/600V CAT. Ⅳ, MAX 10A DESCRIPTION 10A ULTRA SOFT PROBE TEST Lead Length Probe......
Guilin Huayi Peakmeter Technology Co., Ltd.
|
Spring Loaded Pogo Pins High Precision Test Probe Pogo Pin For Wearable Device Charging
|
... in electronic devices. Its structure is designed to ensure reliable conductivity, durability, and mechanical resilience. Below is a detailed breakdown of its components. Plunger (Needle/Pin): The movable contact tip that compresses when pressed against a...
SHENZHEN JRKCONN ELECTRONICS CO.,LTD
|
ISO 6469 Electrical Safety Testing Equipment For Electric Commercial Vehicles
|
...Electrical Safety Test System For Electric Commercial Vehicles Complied Standards & Clauses ISO 6469-1:2019 Electrically propelled road vehicles — Safety specifications — Part 1: Rechargeable energy storage system (RESS) GB 38032-2020 Safety Requirements for Electric Buses ... Equipment Overview For the vehicle safety test and high voltage safety test of new energy vehicles (commercial vehicle), we launch SNE6809CS series special safety...
Sinuo Testing Equipment Co. , Limited
|
Durable Electrical Safety Test Equipment IEC60335-1 Clause 21.2 Scratch Test Pin Hardened Steel
|
IEC60335-1 Clause 21.2 Scratch Test Pin Made of Hardened Steel 1. Introduction Hardened steel Pin is designed according to IEC60950 clause 2.10.8.4 and IEC60335-1 clause 21.2. It is applied to do scratch test for accessible parts of solid insulation of ......
Pego Electronics (Yi Chun) Company Limited
|
Submit your “pin electric safety testing probes” inquiry in a minute :