Soundproofing stonewool Pipe Insulation Material High Density
|
... thermal insulation material which is well recognized as one of the best material for thermal and insulation purpose is manufactured from a mixture of natural rocks (basalt and dolomite) melted at high temperature to form a molten matrix, which is then...
TUNGKIN INDUSTRY Co.Ltd
|
White Pipe Insulation Material / Bubble Wrap High Temperature Pipe Insulation
|
...Insulation Blanket TS-M750 Nanoporous Thermal-Insulation Blanket Operating Temperature(℃) -270~750 Conductivity at room temperature(25℃) 0.015~0.023W/m.K Density(kg/m3) 120~180 Hydrophobicity(%) ≥ 99.2 Combustion Performance Lever A1 Non-combustible Thickness 5mm, 8mm, 10mm Color Dark Grey Specification 1*20m or 1*50m TS-H1150 series nanoporous thermal-insulation blanket for medium-high......
kinghonest industries LTD
|
Insulating Materials Smoke Density Chamber , IEC 6162 High Voltage Low Current Arc Test Chamber
|
IEC 6162 High Voltage Low Current Arc Resistance Testing Equipment for Solid Insulating Materials Mainly applicable to: GB/T1411-2002 dry solid insulation materials High voltage, low current arc discharge test. Compliance with the standard: This tester is ......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
200W Customize Copper Pipe Heat Sink / High Density Copper Aluminum Fin Heat Sink Nickle Plating
|
... Strips, Purity over 99.5% Depend on customer's requirements Description: Large Image: Aluminum Fin Heat Sink with Copper Pipe 150-200W Big Power Copper Pipe Heat Sink Copper Pipe Heat Sink for Projector Heat Sink With Copper Pipe For...
LiFong(HK) Industrial Co.,Limited
|
PU Material High Density Model Board For Model Building and Rapid Prototyping
|
MB5120 Polyurethane High Density Model Board Size 750mm - 500mm 1000mm-500mm DESCRIPTION LiHongTooling Board is especially noteworthy for its smooth and homogeneous surface combined with an even cell structure. It has a high edge stability, small thermal ......
Yongzhou Lihong New Material Co.,Ltd
|
Tidy Facade Floor Heating Pipe PE RT High Density Polyethylene Pipe
|
...Pipe color according Specification dn16-32mm Standard: GB,DIN,JIS,BS The PE-RT pipe inherits good flexibility, heat conductivity, chemical inertness from PE material. Meanwhile the design of special molecule and synthesis production enable it to be higher resistant to heat and pressure under the high......
DSTHERM INDUSTRIAL LIMITED
|
Electrical Insulation Materials High Voltage Insulator Motor Part 6630 DMD
|
Introduction The insulation paper material is a three-layer soft composite insulating material composed of two outer layers of polyester non-woven fabric and a middle layer of polyester film. The insulation rating is Class B 130 °C. It combines the good ......
Ningbo Nide Tech Co., Ltd
|
Super Elastic 3412 TPU Hot Melt Adhesive Film Glue Polyurethane Material High Density
|
0.05mm thick and 152.4cm wide super elastic 3412 hot melt film bra adhesive glue Advantages: Super elastic. Thickness is 0.05mm and width is 152.4cm. Very suitable for bra and underwear bonding. Conventional size per roll: 0.05mm*152.4cm*100yards. Gross ......
Shenzhen Tunsing Plastic Products Co., Ltd.
|
Large Heat Preservation Pipe Making Machine High Output Stable Operation
|
...pipe extrusion line Application: PE insulation pipe is also called PE outer protection pipe. This pipe is composed of a high-density polyethylene outer protective layer, a polyurethane rigid foam plastic insulation material and a steel pipe. The insulation layer material is a rigid polyurethane foam with a density of 60kg/m3 to 80kg/m3, which fully fills the gap between the steel pipe......
Jwell Machinery (Changzhou) Co.,ltd.
|
Thermal Insulation High Density Soft Aerogel Insulation Blanket
|
... temperatures up to 650°C (1200°F). With its extremely low thermal conductivity, Aerogel Insulation Blanket is up to 75% thinner than competing insulation materials. This makes it ideal for installation in congested areas or near mechanical clashes,...
HUATAO LOVER LTD
|
