High Precision 532-2050nm PM Manual Variable Optical Attenuator For Optics Laboratory
|
...PM Manual Variable Optical Attenuator for Optics Laboratory Product Description 532-2050nm Polarization Maintaining (PM) Manual Variable Optical Attenuator is a fiber component which can control the attenuation of the optical power by adjusting the screw, the attenuation value can be up to 60dB, it's widely used in optical power testing system, fiber line protection and optical......
Gezhi Photonics (Shenzhen) Technology Co., Ltd.
|
Polarization Maintaining 1310/1550nm PM MEMS Variable Optical Attenuators (VOA)
|
...Variable Optical Attenuators (VOA) Application Channel on/off switching Gain-tilt control in EDFAS Receiver protection Power control and equalization in multi channel System Features Low Power Consumption Insensitive to Shock and Vibration Low Insertion Loss & Low PDL Low WDL &Compact Design High Reliability and Stability Descrition of 1310nm 1550nm Single Mode PM MEMS Variable Optical Attenuator......
Shenzhen Unifiber Technology Co.,Ltd
|
4 Channel Variable Optical Attenuator 9um 125um Single Mode Fiber
|
...Variable optical attenuator Model # U8734 / U8738 Attenuator Range 0~40 dB(45dB Type) Calibration Wavelength 1310 / 1550 /1610 nm Insertion Loss ≤1.5 dB Fiber Type 9/125 um single mode Connector Type FC/UPC Connector Attenuation Accuracy ± 0.1 dB (0 ~ 20 dB), ± 0.2 dB (20 ~ 40 dB) ≤ ± 0.02 dB (0 ~ 25 dB With Power control) Repeatability ≤ ±0.02 dB Averaging time of monitor PM 1~1000ms Settling Time 100ms Attenuation......
Guangzhou UC Instruments., Co. Ltd.
|
SC PC SC APC Voa Variable Optical Attenuator Single Mode Adapter Type
|
...Limited has a structure similar to an optical adapter. It utilizes the air gap between the two connectors to realize optical attenuation. However, the air gap can be continuously adjusted and fixed manually. This induces a variable optical attenuation from...
ANC International Co., Limited
|
Duplex Inline Variable Optical Attenuator LC UPC Multi Signal Attenuation
|
... of the signal in the fiber as it is transmitted through the device. These VOAs can be used to to precisely balance the signal strengths in fiber circuits or to balance an optical signal when evaluating the dynamic range of the measurement system....
COMELINK CO.,LTD
|
1260~1610nm Inline Fiber Optic Attenuator , 0-60dB Variable Optical Attenuator
|
...Variable Fiber Optic Attenuator With SC UPC Connector Single Mode Variable Optical Attenuators allow the user to manually vary the attenuation of the signal in the fiber as it is transmitted through the device. These VOAs can be used to to precisely balance the signal strengths in fiber circuits or to balance an optical signal when evaluating the dynamic range of the measurement system. The maximum specified attenuation......
OMC Industry Co.Limited
|
GaPho PM VOA Fiber Optical Attenuator Palorization Maintaining 1310nm 1550nm
|
...Optical Attenuator Palorization Maintaining Optical Fiber VOA The PM VOA is used to manually adjust the attenuation of laser power, so as to adjust power in a fiber optic system, and to evaluate the dynamic range of a fiber optic systems. A manual rotation knob can be used to adjust the attenuation......
Shenzhen Jiangfan Communication Equipment Co., Ltd.
|
CATV Networks FC Variable Optical Attenuator , 1310nm / 1550nm 1 - 30 Db Attenuator
|
...Variable Optical Attenuator 1 - 30dB , 1310nm / 1550nm Optical Fiber Attenuator Quick Detail: 1. FC variable fiber attenuator 2. Adjustable attenuation value 3. 1~30dB attenuation range Description: FC variable optical attenuator is a component installed in a fiber optic transmission system that reduces the power of a optical signal. It is often used to limit the optical power received by the photo detector to within the limits of the optical...
NEW LIGHT OPTICS TECHNOLOGY LIMITED
|
FC to FC Variable Fiber Optic Attenuator , VOA Variable Optical Attenuator
|
...APC - Model Name: Inline fiber attenuator - Material: Plastic - Dusty cap color: green, blue - Attenuation range: 0-30 dB Applications: - Fiber optic CATV - Fiber optic test - Erbium Doped Fiber Amplifiers (EDFA) - Dense Wave Division Multiplexers (DWDM) -...
kocent optec limited
|
Black MU SM Plug In Fixed 100W Variable Optical Attenuator
|
...Variable Optical Attenuator Black color Variable Optical MU SM Plug-in Fixed 100W Attenuator Fiber Optic Attenuator Fiber Optic Attenuator is one kind of optical passive device which is used to debug the performance of the optical power in the optical communication system,debugging fiber optic instrument calibration correction, optical signal attenuation.And used for the attenuation of the input optical......
Shenzhen CY COM Product Co., Ltd
|
Submit your “pm manual variable optical attenuator” inquiry in a minute :