12S15A Battery Protection Circuit Module (BMS) For 44.4V Li-ion/Li-Polymer Battery Packs
|
...Protection Circuit Module for 44.4V 12S Li-ion and Li-polymer battery pack; 2.PCM applies for 12 cells Li-ion/Li-polymer battery pack; 3.To prevent the battery packs from overcharge,overdischarge,over current, over temperature ,short circuit ; 4.With cell balance/equilibrium function; 5.Compatible with both Li-ion and Li-Polymer cells. 6.How balancing function works? after battery......
SHENZHEN BEST ELECTRIC TECHNOLOGY CO., LTD.
|
Electric Forklifts Lithium Battery Module BMS Lifepo4 Solar Power Battery Backup
|
... Solar Backup Power Lifepo4 Batteries Lithium Ion Phosphate Battery for Off-grid Power System/Telecom Product Introduction Modular Structure Energy Storage System Compatlble with All Famous Inverters Integrated BMS system for Remote Monitoring Off Grid / O......
Shenzhen Kweight Development Co.,Ltd
|
10s 40A 36V Battery Protection Circuit Module 10S 36V 35A BMS Module Circuit
|
... 1. Li-ion 10S 36V 15A/20A/30A/40A/50A/60A bms is used for 10 series 36V battery pack 2.We can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc. 3.The main functions are: over charge protection, over discharge protection,...
Lu’s Technology Co., Limited
|
Customized Rechargeable Lithium Battery Module With BMS Protection
|
...Battery Module With BMS Protection 1. Lithium battery module advantage High intrinsic safety Quick charge capability. Can be used in any position More than 2000 cycles (at 100% discharge) Extremely resistant to high current (10C continuous, 20C pulse) Temperature range: -20 to +60ºC 1/3 weight of lead-acid batteries Lifespan > 20 years BMF protective circuit Can be replaced 1:1 with lead-acid batteries......
Shenzhen Topband Battery Co., Ltd
|
432V 125A 135S Battery Power Bms For 3.2V Lithium Battery Pack
|
...Battery Management System Bms Lifepo4 Bms 432V 125A 135S BMS For 3.2V Lithium Battery Pack With RS485 CAN BUS PROTOCOL For Inverter Ups Ess Solar BMS Configuration 135S 432V 125A high voltage BMS(HV BMS) * 1set 15S BMU *9sets 15S wire harness * 8sets (15S48V battery module, 9 modules in series for 135S 432V 120A system) Specification Product Name BMS Model no. RBMS07S2-3-125A432V protecting......
Hunan GCE Technology Co.,Ltd
|
3S 8A 11.1V Lithium Battery Charger Protection Board Module for 3PCS 18650 Li-ion Battery Cell Charging BMS 10.8V 12V 12.6V
|
...1V Lithium Battery Charger Protection Board Module for 3PCS 18650 Li-ion Battery Cell Charging BMS 10.8V 12V 12.6V The ITL0030100039-01 is a precision-engineered protection board designed exclusively for 3-cell series (3S) lithium battery packs—......
Shenzhen BAK Technology Co., Ltd.
|
3S 10A 12V Lithium Battery Charger Protection Board Module for 3pcs 18650 Li-ion Battery Cell Charging BMS 11.1V 12.6V
|
... 10A Li-ion 18650 lithium battery protection charger Board 11.1V 12.6V The attribute of the protection board of the lithium battery: Model: 3S 10A Size: 53 * 17 * 4.0mm Load voltage range of 4.25V to 4.35V (+/- 0.05V) Discharge voltage ......
DZ Iron Steel Group
|
51.2V LiFePO4 Battery Pack 6000 Cycles Rack Lifepo4 Battery Module
|
...Battery Pack 6000 Cycles Rack Lifepo4 Battery Module Product Description Of LFP Energe Storage Battery: This battery module integrated with intelligent BMS inside, has big advantages on safety, cycle life, energy density, temperature range and environmental protection. This product specification describes the type, size, structure, electrochemistry performance, service life, and BMS......
Dongguan Funpack Elec Co., Ltd.
|
CA-6S-12A-E 24V PCB BMS Protection Board For 6 Pack 18650 Li Ion Lithium Battery Module
|
...BMS Protection Board For 6 Pack 18650 Li-ion Lithium Battery Module Product Description: Specifications: Size: approx.50*30*2mm Lampshift maximum discharge current: 12A Instantaneous discharge current: 25A Charging voltage: 25.5V Charging current: 15A (MAX) Overcharge detection voltage: 4.28 ± 0.05V Overcharge protection......
Shenzhen Creatall Electronics Co., Ltd.
|
BMS 3S 12.6V 6A 18650 Li-ion Lithium Battery Module for Arduino
|
... Overcharge range Overcharge range Upper operating current 8A Upper transient current 40A±5A Function over charge protection FAQ 1. What is the terms of...
Oky Newstar Technology Co., Ltd
|
Submit your “protect battery modules bms” inquiry in a minute :