Roughness Ra 1nm LiNbO3 Wafer in 4'' 6'' 8'' doped Optical grade or SAW grade
|
Roughness Ra 1nm Customized LiNbO3 Wafer in 4'' 6'' 8'' doped Optical grade or SAW grade Lithium niobate is transparent between 0.25 and 5.3 μm. It can be used in visible, near IR and middle IR ......
Hangzhou Freqcontrol Electronic Technology Ltd.
|
LiTaO3 LiNbO3 Wafers LN LT Thin Films Wafers 42°Y
|
...substrate material is a piezoelectric crystal such quartz (SiO2), lithium tantalate (LiTaO3) or lithium niobate (LiNbO3). This are single crystal materials, which are cut out after the growth process with a defined orientation to a wafer. NQW produced this...
SHANGHAI FAMOUS TRADE CO.,LTD
|
SAW Grade Acousto Optic Lithium Niobate LiNbO3 Wafer
|
...LiNbO3 Crystal LiNbO3 crystal combines low cost, good mechanical and physical properties as well as high optical homogeneity. Therefore, LiNbO3 wedges have been widely used in fiber isolators and circulators. LiNbO3 is also a good acousto-optic crystal and used for surface acoustic wave (SAW) wafer and A-O modulators. Crystro provides acoustic (SAW) grade LiNbO3 crystals in wafers......
ANHUI CRYSTRO CRYSTAL MATERIALS Co., Ltd.
|
6 Inch LiTaO3 LiNbO3 Wafer Black Polarized For SAW / BAW 128 Degrees Y Z-Cut
|
6 Inch LiTaO3 LiNbO3 Wafer Black Polarized For SAW / BAW Applications 128 Degrees Y Z-Cut Lithium niobate (LiNbO3) single crystal is a ferroelectric crystal with high electromechanical coupling coefficient and low propagation loss, which can be used to ......
SHANGHAI FAMOUS TRADE CO.,LTD
|
Electrostatic Chuck Aluminum Nitride Ceramic With Density 3.3g/Cm3 Surface Roughness Ra≤6um
|
... in a variety of semiconductor processes to hold the wafer during processing. ESCs employ a platen with integral electrodes which are biased with high voltage to establish an electrostatic holding force between the platen and wafer, thereby “chucking”...
Wuxi Special Ceramic Electrical Co.,Ltd
|
Good Physical And Mechanical Properties LiNbO3 Commonly Used Material For Pockels Cells, Q-Switches
|
...LiNbO3 Commonly Used Material For Pockels Cells, Q-Switches Product overview: LiNbO3 Crystal is widely used as frequency doublers for wavelength > 1 mm and OPOs pumped at 1064 nm as well as QPM devices. LiNbO3 is the most commonly used material for Pockels Cells,Q-Switches and phase nodulators,wavwguide substrate,and surface acoustic wave (SAW) wafers,etc.we can provide high quality and large size LiNbO3...
Jinan Crystrong Photoelectric Technology Co.,Ltd
|
Highly Sophisticated Inductance Sensor Portable Roughness Tester With Separate Probe
|
...Roughness Tester with SEPARATE PROBE Ra,Rz,test at any angle Key words:portable roughness tester, roughness ra, surface roughness, surface finish, roughness tester mitutoyo, roughness testing machine, surface finish tester, surface roughness tester manufacture, roughness testing machine manufacture SPECIFICATIONS Display: 4 digits, 10 mm LCD, with blue backlight Parameters: Ra, Rz Measuring Range Ra...
HUATEC GROUP CORPORATION
|
MgO LiNbO3 Nonlinear Crystals Zero Residual Birefringence Iso9001 Certify
|
... to its large Electro-Optic (E-O) and Acousto-Optic (A-O) coefficients, LiNbO3 crystal is the most commonly used material for Pockel Cells, Q-switches and phase modulators, waveguide substrate, and surface acoustic wave (SAW) wafers, etc. One of the most...
Nanjing Crylink Photonics Co.,Ltd
|
Pocket Sized Surface Roughness Tester Possess Ra Rz Rt Rq
|
...Roughness Tester Possess Ra Rz Rt Rq General Introduction Pocket-Sized Surface Roughness Tester SRT-5000B is a new generation of Surface Roughness Tester Series. It features high accuracy, wide application, simple operation, portability and stable performance. The tester is widely used in measuring the surface roughness......
HUATEC GROUP CORPORATION
|
Wire To Board 4.14mm CONN Header Wafer Connector RA Right Angled Dual Row
|
4.14mm CONN header wafer RA right angled dual row PA6T wire to board conn white 1-770974-0 Specifications: Material And Finish: Insulator:Nylon ......
Shenzhen Shinelinkconn Technology Co.,Ltd.
|
Submit your “ra roughness linbo3 wafer” inquiry in a minute :