IEC 60598-2-5 Outdoors Road Lamp Wind Force Resistance Test Device
|
...Road Lamp Wind Force Test Device For Wind Resistance Test Applied Standards For Road Lamp Wind Force Test Device: This machine meets the standards of IEC60598-2-3:2011 clause 3.6.3.1, figure 1 IEC60598-2-5 clause 5.6.5. Application For Road Lamp Wind Force Test Device: It used to detect the static load test of wind resistance for street lamps outdoors. Technical parameters For Road Lamp Wind Force Test Device: Wind-force......
Sinuo Testing Equipment Co. , Limited
|
PLC G5/G13 Lampholders Axial Force Test Device Clause 4.4.4 For Fluorescent Lamps
|
...) for fluorescent lamps according to IEC60598-1 clause 4.4.4. It is applied to assess the fixing device of lamhpolder should have adequate mechanical strength so as to withstand rough handling as may be expected in normal use. The test should be checked by...
Pego Electronics (Yi Chun) Company Limited
|
Aluminum Material Light Testing Equipment Lamp String Flexible Rope Winding Test Device
|
Lamp String Flexible Rope Winding Test Device Equipment overview: Lamp string soft rope winding test device to meet the IEC60598-2-20:2002, GB7000.9-2008 the 6.14 chapters test requirements and figure 3 requirements made; this device mainly examine sealing lamp on whether have sufficient mechanical strength. Technical parameters: The conformity of the rigid lamp string is tested by turns over and over again with each test......
KingPo Technology Development Limited
|
Luminaries Testing IEC60598-2-21 Cold Bending Test Device
|
...test whether the wire or rope lamp has cracks when it is wound at low temperature. The lamp is wound on the appliance shown in Figure 2, with a winding diameter of 4-5 times its own diameter, and then placed in the environment of -15℃ plus or minus 2℃...
SKYLINE INSTRUMENTS CO.,LTD
|
Light Testing Equipment for Lampholder Contacts IEC60598-2-20
|
...The incandescent lamp is removed and a force of 15 N is applied for 1 min to each of the conductors connected. Following this, a force of 30 N is applied for 1 min to the two conductors together. The forces are applied at a distance of 3 ± 0,8 mm from the...
Guangzhou HongCe Equipment Co., Ltd.
|
0-50N.M opening torque test meter instrument device for bottle cap
|
...designed to test the opening and closing torque of various caps. It is mainly used to test the opening and closing torque and correction tightening force of various caps, lamp holders, etc., and the torsional destructive test of parts. The instrument has a...
Shanghai Glomro Industrial Co., Ltd.
|
Conical Urban Road Electrical Power Pole Galvanized Steel Tapered 10kv - 550kv
|
...0.25m from the top. Under these loads, the safety factor with respect to the elasti limit of the steel is larger than 1.8. The post also resists a torque equal to (F+V) ×1m. Tests shows the load intervened when breaking is around 2 times of design load....
Jiangsu milky way steel poles co.,ltd
|
Yellow Lamp Electronic Power Transformer Copper,Copper Wire Ferrite Core
|
... a toroidal, double winding and multi-winding, EE transformer, ERL35 high frequency transformer and ERL transformer structure, our transformer is made with high-quality copper and copper wire ......
Shenzhen Xin Jie Si Rui Electronic Technology Co., Ltd.
|
High Brightness 22 Inch Curved LED Light Bar 120w Double Row For Off Road
|
Hottest sale 22" CREE 120w light force led light bar curved double row outdoor for all Advantages: 1. Original LED Chips from US. 2. Lamp Body is Faster Radiating for Aluminum, High Temperature Resistance Beauty Exterior. 3. Lamp Cover Adopted Germany Pmma......
Guangzhou shuangfeng lighting technology co.itd.
|
90km/H Special Vehicles 40000KG 104RB Heavy Duty Wrecker Altitude 0-4500m
|
... hook assembly 5. Control structure assembly 6. Chain wheel and hanging assembly 7. Winch assembly (include winch clutch, impaction device)...
Shanghai Jindun special vehicle Equipment Co., Ltd
|
Submit your “road lamp wind force test device” inquiry in a minute :