SFF 8417 Cable Bending Cycle Tester For Communication Cable Bending Test
|
SFF 8417 Cable Bending Cycle Tester Suitable for Communication Cable Bending Test Model:C5092 Purpose: Cable bending test machine is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. The testing method is ......
Infinity Machine International Inc.
|
Shoes Midsole / Inner Sole Fiberboard Bending Footwear Tester 80x10mm 60±10 r/min
|
.... It is applicable to all fiberboards other than those used for insole seats and heel lifts. Fiberboard is flexed mechanically and repeatedly to (90±1)°each side of the vertical at the rate of 60 cycles per minute until failure occurs. From the...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Computer Control 5000N Universal Testing Machines Paper Cup Bending Strength Tester
|
...fatigue cycling on metals, tape, composites, alloys, rigid plastics and films, elastomers, textiles, paper, board and finished products. Design standard: ......
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
22.5 Degree BALLY Leather Bending Resistance Tester and rubber testing equipment
|
...Bending Resistance , BALLY Leather Flexing Resistance Tester This tester designed to test the leather, artificial leather flexing resistance and transfer finished leather. The clamp descends through an angle of 22.5° and cycling (100±5) times per min, the number of cycles......
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
Bicycle / Bike Fork Bending Fatigue Backward Impact Tester EN Standard
|
..., in the plane of the wheel and perpendicular to the axis of the fork riser, was applied to a load carrying device that rotated on the pivot of the fork joint. The test cycle is 100,000 cycles and the test force values are shown in Table 9. The...
SKYLINE INSTRUMENTS CO.,LTD
|
Compress Tester Load Cell Low Cycle Fatigue Test Tensile Strength Tester
|
... level widely used for tension, compression, bending and shearing test of all kind of materials. The Test Object Compress tester load cell low cycle fatigue test Tensile Strength Tester mainly applied to test the metallic and non-metallic materials such as...
Hai Da Labtester
|
Standard ASTM D4032 Fabric Stiffness Tester Pneumatic With 0.4MPa - 0.7MPa Air Source
|
Fabric Stiffness Tester , To Test The Bending Height , Flexural Rigidity And Bending Modulus Application Fabric Stiffness Tester Pneumatic, used for testing the stiffness of fabric by the bending cycle test method of ASTM. Test Procedure A plunger of 25.......
TESTEX INSTRUMENT LTD
|
Anti Corrosion Cable Flex Tester , 60c.P.M Cable Bending Tester
|
... Bending Fatigue Test Machine apply for bending endurance test for cable connected with plug.Fix the sample on jig and put the weight at the cable, then to swing the jig right and leftwith the setting angle. after rotating to required cycles then stop to...
Dongguan Wirecan Technology Co.,Ltd.
|
BS 3144 Electronic Flexural Resistance Tester Footwear Testing Equipment
|
... resistance. Can test 12 pieces of sample at the same time, equipped with preset electronic counter, record the cycles. Specifications: Flexural Angle: 22.5° Speed: 100±5rpm (adjustable) Counter: 0~999,999 Station: 12 Dimension: 850×......
Dongguan Hust Tony Instruments Co.,Ltd.
|
SATRA TM161 Footwear En Shoe Sole Bending Flexing Resistance Tester
|
... some holes at the maximum bending position, and mount specimen at both grips, one fixed, one movable. Specimen runs flexing owing to the movement of machine. After a certain test cycles, remove the specimen and check its difference of incision length....
Gester International Co., Ltd
|