BGD 566 ISO 6860 Conical Mandrel Tester Coating Shaft Bending Machine
|
...Conical Mandrel Tester Coating Shaft Bending Machine 1. Description: The Conical Mandrel Tester is designed in accordance with the standards of GB/T 11185 and ISO6860-84, and is used to evaluate the crack resistance or anti-peeling performance of the coating of colored paints, varnishes or related products when bending around a conical......
DONGGUAN LONROY EQUIPMENT CO LTD
|
GB/T 11185 Paint Testing Equipment Conical Mandrel Tester With Stainless Steel Shaft
|
... rod, and clamp the fixing plate. → bend the test plate along the conical axis with the manual operating lever → bend the sample 180 degrees with uniform force within 15 seconds → remove the paper and check the ......
Hebei Better United Import And Export Co., Ltd.
|
ASTM D522 Standard Conical Mandrel Bending Tester Testing The Max. Of Sample Size 200x100mm
|
Conical Mandrel Bending Tester Product Introduction: A very robust mechanical unit for determining the elasticity, adhesion and elongation of dried paint on sheet metal. It can be used in accordance with ......
HUATEC GROUP CORPORATION
|
Conical Mandrel Bend Tester Astm D522 Standard With Firm Structure
|
Conical Mandrel Bend Tester Astm D522 Standard With Firm Structure Product Introduction: A very robust mechanical unit for determining the elasticity, adhesion and elongation of dried ......
HUATEC GROUP CORPORATION
|
IEC 60065 150N±10N Rotation Angle Corrosion Resistant Metal Mandrel Tester
|
...Mandrel Tester Product Overview: This tester complies with IEC 60065: 2014 Clause 8.21, Figure 14-16, IEC 60558-1Fig6, IEC 60950 and other standards for tensile and electrical strength verification of indivisible thin layer materials. The tester has mechanical limits at 0 ° and 230 ° to ensure the accuracy of the test angle. Technical Parameters: Mandrel......
Sinuo Testing Equipment Co. , Limited
|
IEC60558-1 Fig6 Mandrel Tester Device Light Testing Equipment 100N / 150N
|
IEC60558-1 Fig6 Mandrel Tester Device Light Testing Equipment 100N / 150N Product information: This tester conforms to IEC60558-1 Fig6 and IEC60065 Fig14--16. The test shall be performed by fixing the specimens of thin sheets on a mandrel made of nickel ......
Guangzhou HongCe Equipment Co., Ltd.
|
High Speed Carbon Steel Shaft Forging , Mandrel And Transmission Shaft GB, YB, JB, ASTM, DIN, BS, NF, JIS, AFI, ISO,
|
High Speed Carbon Steel Shaft Forging , Mandrel And Transmission Shaft Specifications: Material 45#, 35CrMo, 42CrMo, 40Cr, 34CrMo4, 40CrMnMo, 30CrNiMo, ect. Size Diameter:200-750mm Length:......
Jiyuan City Kunyuan Forging Co., Ltd
|
Anaesthetic Respiratory Equipment Conical Connector Tester EN ISO 5356-1:2015
|
EN ISO 5356-1:2015 Anaesthetic and respiratory equipment — Conical connectors Test equipment Check compliance by engaging the cone or socket in the appropriate plug or ring test gauge according to Figure A.1 and Table A.1, by applying an axial force of (35......
KingPo Technology Development Limited
|
Three Stations Shaft Key Life Tester ASR-5630 with Power Off Memory
|
Three Stations Shaft Key Life Tester ASR-5630 with Power Off Memory Brief Introduction: The iqualitrol ASR-5630 is suitable for the life aging test of key switches, ......
DongGuan Q1-Test Equipment Co., Ltd.
|
High Temperature Resistant Customizable Extruder Shaft with Nickel Chrome Tungsten Composite Liner for PEEK PVDF Production
|
... geometric shapes (such as the number of thread heads, pitch, rotation direction, etc.). Due to its modular nature, this design is also known as a "building block" screw. The mandrel, often also referred to as the screw mandrel or main shaft, is a...
BLOOM(suzhou) Materials Co.,Ltd
|