Slight Odor PU Mold Release Agent High-Gloss Multi-Cycle Demolding Of Polyurethane CPU Wheels
|
High-Gloss Multi-Cycle Demolding of Polyurethane CPU Wheels Product Description Lubekote 9129E is a specialized solvent-based CPU wheels mold release agent designed for precision polyurethane wheel manufacturing. Formulated to deliver flawless high-gloss ......
Shanghai Lorechem Company Limited
|
Water Base Mould Release Agent Shoe Sole molding release agent
|
...silicone resin. Mainly used for: polyurethane molding, FRP process molding, polydiamide, phenolic, polyester and epoxy resin. Process: It can be used in the Polyurethane and rubber field. It should be diluted into 20-25 time for the shoe ......
JOYWAY INDUSTRIAL COMPANY LIMITED
|
Yellow Mold Release Wax Agent For Composite FRP Demoulding # No. 8 V2.0-311g
|
...Mold Release Wax Agent For Composite FRP Demoulding # No. 8 V2.0-311g Basic information 1. Eco-Friendly 311g/can Dry Mould Release Agent/waxis a chemical used to prevent other materials from bonding to surfaces. 2. It can provide a solution in processes involving mold release, metal die-cast release, plastic release, adhesive release, and tire and PU foam release......
Anhui Hongyue Trade Co., Ltd
|
PU Filter Mould For Nissan Heavy Duty Vehicles Air Filters Material
|
PU Filter Skeleton Mould For Nissan Heavy-Duty Vehicles Air Filters Materialerial 1. Product introduction The process flow of PU skin molding is as follows: first spray release agent on the upper and lower molds of the skin molding mold, and then spray in mold paint on the surface of the lower mold, which can be sprayed with in mold paint of different colors. Then set the mold and pour two-component polyurethane raw materials, and start the mold...
Anping Changfeng filter material factory
|
Pu Hot Melt Tpu Polyurethane Adhesive Film For Silicone Products
|
Pu Hot Melt Tpu Polyurethane Adhesive Film For Silicone Products Product: DS1901 Description: This kind of hot melt adhesive film for liquid (solid) silica gel high temperature vulcanization molding process has a stable adhesion, and the rubber film and silica gel treatment agent is not toxic, no foaming, no stratification and other characteristics. Composition: Polyurethane Physical Characteristics: Color Transparent Release......
Shenzhen Tunsing Plastic Products Co., Ltd.
|
Automatic Novec 1230 Fire Suppression System Gas DC 24V 1.6A
|
...316.04. It is a clear, colorless, slightly odorous, and easily gasified liquid fire extinguishing agent at room temperature, which is not a dry hazardous substance and does not leave residue after release. The fire extinguishing agent is neither dry HFC...
Guangdong Air Giant Fire Equipment Co.,Ltd.
|
Hydrophobic Effect Zinc Stearate Dispersion , CAS NO 557 05 1 Zinc Stearate Msds
|
... and insoluble in water, soluble in hot ethanol, benzene, toluene, turpentine and other organic solvents. 2, Zinc stearate is White, hydrophobic powder with a slight, characteristic odor. Mp: 130°C. Density: 1.1 g cm-3. Insoluble in water,...
Guangzhou Quanxu Technology Co.,Ltd.
|
Submit your “slight odor pu mold release agent” inquiry in a minute :