Screwless Terminal Clamping Capacity Test Apparatus IEC 60884-1 Clause 12.3.11
|
... Figure 14) and IEC 60669-1 clause 12.3.11, etc. It is intended to verify whether screwless terminals can securely retain rigid solid conductors, even after the conductors have been deflected during normal installation. The test involves deflecting the...
Sinuo Testing Equipment Co. , Limited
|
Wire Clamping Terminal Durability Test Device Terminal Clamping Force Test Machine
|
... clause 9.3.2.4 and table 26 and figure 6, IEC60947-1, etc. Equipment Overview Specimens and restrictions: Screw terminals, threadless terminals and connectors. Test purpose: To examine whether the screw terminals and threadless terminals can withstand the...
Sinuo Testing Equipment Co. , Limited
|
ASTM D5182 FZG Method Lubricating Oil Gear Wear Scuffing Load Capacity Test Apparatus
|
FZG Method Lubricating Oil Scuffing Load Capacity Testing Equipment Detailed Photos Product Description Introduction FZG gear wear test machine is a multi-purpose testing machine.It can be used for the evaluation of the scuffing load capacity of the ......
Advanced Instruments Co.,Limited
|
IEC60884-1 Figure 11 Test Apparatus For Checking Damage To Conductors Test Machine
|
...Test Apparatus For Checking Damage To Conductors Test Machine Product details: This testing machine is also called the test apparatus for checking damage degree of wire which confirms to many standards such as IEC60884-1 clause 12.3.10 figure 11, IEC60669 and so on. This compliance is used for judging whether the design and the structure of the clamping screw terminal......
Guangzhou HongCe Equipment Co., Ltd.
|
Checking Conductors Damage IEC60884 Fig11 Test Apparatus
|
...standards such as IEC60884-1 clause 12.3.10 figure 11, IEC60669 and so on. This compliance is used for judging whether the design and the structure of the clamping screw terminal is correspondent with the requirement of non over-damage to the wire. Besides...
Guangzhou Shice Equipment Co., Ltd.
|
IEC 60069-1 IEC Test Equipment Conductor Damage Degree Test Apparatus Rate 10 ± 2 R/Min
|
...Test Apparatus IEC 60069-1 Test Equipment Rate 10 ± 2 r/min Standard: IEC 60884-1 ‘Plugs and socket-outlets for household and similar purposes – Part 1: General requirements’ clause 12.2.5, figure 11 IEC 60669-1 ‘Switches for household and similar fixed electrical installations – Part 1: General requirements’ clause 12.2.5, figure 9 Standard description: Terminals with screw clamping......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Clamping Device Test Machine CL-4
|
...used for judging whether the design and the structure of the clamping screw terminal is correspondent with the requirement of non over-damage to the wire. Besides, it is also used to check whether the clamping screw terminal can bear the stress during the...
shanghai kerang technology co ltd
|
Cable Static Flexibility Test Apparatus IEC60227-2
|
...Test Apparatus IEC60227-2 1. Introduction The static flexibility test apparatus is designed to meet the test requirements of IEC60227-2 clause 3.5 and GB/T5023.2 clause 3.5 for testing the flexibility of cables with conductor cross-sectional areas ≥2.5mm2. 2. Parameter Working Power AC220V/50Hz Control units Meter+buttons Height from ground 1.5m above Clamp A Fixed end Clamp......
Pego Electronics (Yi Chun) Company Limited
|
IEC 60335-2-15 Compliant Kettle Movement Test Apparatus with 400 mm Pivot Distance and 5 mm Rubber Thickness
|
... balanced with the spout pointing radially outwards. Between the test apparatus and the handle shall be of rubber of a thickness of 5 mm and a hardness of 50 Shore ± 10 Shore. The clamping position shall be in the centre of the grip area of the handle....
KingPo Technology Development Limited
|
Vertical Flammability Test Apparatus , Flammability Testing Equipment Standard IEC60332-1
|
...Test Apparatus of Single Wire Vertical Combustion Tester Feature: import time and temperature controller,digital display and box separat designed 2mm stainless steel molding by numerically control ,beautiful,durable Special used burner and clamp ,complete in accord with standard requirement Pneumatic type motor control,no need man operate Technical data: Model:5704 Execute standard:GB18380.11 Test......
Suzhou Yangyi Vouch Testing technology Co.,Ltd
|
Submit your “terminal clamping capacity test apparatus” inquiry in a minute :