8mm Cylindrical Rod Test Probe For Blender As Per IEC 60335-2-14 Clause 20.102
|
... 20.102 and GB4706 clause 20.102, it is applied to check if the blades of hand-held blenders are completely screened from above and unable to touch a flat surface while rotating. The cylindrical rod from any position between the vertical and an angle of...
Pego Electronics (Yi Chun) Company Limited
|
UL 982 Figure 30.2 Blender Accessibility Probe For Blender Container Abuse Test
|
... A blender container shall not break or crack during normal use. 30.4.4.2 A blender employing a thermoplastic container shall be subjected to the test outlined in 30.4.4.4– 30.4.4.7. 30.4.4.3 A blender employing a glass container shall be subjected to...
KingPo Technology Development Limited
|
Stainless Steel Blender Test Probe HT-I24
|
Blender Probe HT-I24 Standard:IEC60335-2-14 CI.20.102. Application:It is used to test whether the blade of hand-held stirrer is completely concealed from above and flat surface can be touched when the blade is rotating. Test sample:Handheld blender. Feature:The test is achieved by applying a cylindrical rod from any position where the angle between the probe and the blade above is 45°to touch the blade. During the test......
shanghai kerang technology co ltd
|
Standard Test Probe B Finger Length 100mm IEC60335 2 14 Clause 20.2
|
...Test Probe B Finger Length 100mm IEC60335 2 14 Clause 20.2 IEC60335-2-14 Clause 20.2. Test Finger B Product Details Standard description: For blenders, detachable parts, except lids, are not removed. The test is carried out with a test probe similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test......
Dongguan Kingpo Technology Limited
|
φ40 Mm Cylinder Rod Test Probe With Hemispherical End IEC60335-2-14
|
...blenders φ40 mm Cylinder Rod Test Probe Standard and Application: The φ40mm cylinder rod meets the standard requirements of IEC 60335-2-14 Clause 20.103. It is used to verify the hand-held blenders other than hand-held food mixers provided with a blender......
Sinuo Testing Equipment Co. , Limited
|
75N force test probe,rigid test probe,safety test probe,iec test probe.access test probe
|
...test probe,rigid test probe,safety test probe,probe test Model TP11: 75N force test probe,rigid test probe,steel test probe rigid test probe is used to assess protection of persons against access to dangerous parts and to assess the mechanicalresistance of openings in the enclosure or inner separations. rigid test probe is made of high-grade steel in accordance with the standards and conforms the measures of the flexible finger probe...
ALLIED TESTING (HK) CO.,LTD.
|
1000V / 10A Multimeter Test Probes Digital Electrical Test Leads Long Service Life
|
...Test Probes And Pen-Typing Lead Probe Wire Features Probe Length: 120mm/Probe Tip Ø2mm Probe Plug: Ø4mm Cross Plug, Right angle type Probe Wire: 22AWG, red/black Length: 800mm Safety Class: EN61010-031, 1000V CAT Ⅱ, MAX 10A DESCRIPTION 10A ULTRA SOFT PROBE TEST Lead Length Probe......
Guilin Huayi Peakmeter Technology Co., Ltd.
|
Gold-Plated ICT FCT Spring Test Probes for Circuit Boards GKS-100 Series
|
...Test Probes Well-established test probes for contacting PCBs For optimal contact to the test points (e.g. pads, vias, and pins), various tip styles with various diameters and finishes are available. Various spring forces available as well as versions with stainless steel springs suitable for high temperatures Used for setting the optimum stroke conditions in the test......
SICHUAN WINNER SPECIAL ELECTRONIC MATERIALS CO., LTD.
|
IEC61032 Rigid test probe 11, IEC60529 Rigid test probe 11
|
IEC61032 Rigid test probe 11, IEC60529 Rigid test probe 11 Product Description IEC61032 Rigid test probe 11, IEC60529 Rigid test probe 11 Introduction: Bonad offers a wide range of probes to meet the most common standards including those from IEC, EN, UL, ......
HongKong Bonad Technology Limited
|
IEC60950 Figure 2C Test Finger Probe Telecom Test Probe End Radius With R6
|
...Test Finger Probe Telecom Test Probe End radius with R6 Product presentation of Test Finger Probe: The Telecom Test Probe is a precision tool designed for electronic testing and measurement applications. With its robust and durable construction, the probe is suitable for use in a wide range of environments and conditions, providing accurate and reliable measurement results. Operating Procedures of Test Finger Probe......
Guangzhou HongCe Equipment Co., Ltd.
|
Submit your “test probe for blender” inquiry in a minute :