Stainless Steel IEC Test Equipment , IEC60884 Socket Outlet Torque Balance Test Apparatus
|
...Torque Balance Test Apparatus Application: - Plug and Socket Torque Tester/Device is for compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus. - Plug Torque Tester/Equipment is a device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. The balancing arm of the test apparatus......
Guangzhou Shice Equipment Co., Ltd.
|
Ground Recessed Luminaires Torque Load Test Apparatus IEC60598-2-13 Figure 13.6.2.1
|
...Torque Load Test Apparatus 1. Introduction The ground recessed luminaires torque load test apparatus is designed according to IEC60598-2-13 figure 13.6.2.1 “torque test”. Parts of luminaire that may be subjected to rotational force shall have adequate mechanical strength. The joints between these parts shall be subject to a 50N torque force for one minute. Each joint shall be tested...
Pego Electronics (Yi Chun) Company Limited
|
BS EN 12983-1 Cookware Handle Torque Resistance Test Apparatus
|
...Torque Resistance Test Apparatus Product information: It is used for resistance test to torque of cookware handle. The torsion deformation of the handle in all directions does not exceed 10°. The degree of deformation cannot affect the function of the handle. After the test, the fasteners are not loosened. It is used to evaluate the torque......
Sinuo Testing Equipment Co. , Limited
|
KingPo IT Test Equipment Socket Outlet Torque Balance Tester KP-LJ2
|
... apparatus as shown in IEC60065 Figure 11. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. The balancing arm of the test apparatus pivots about a horizontal axis through...
KingPo Technology Development Limited
|
Laptop Hinge Torsion Testing Apparatus for Open-and-closed Notebook Hinge Torsion Test Apparatus for Lab Testing Machine
|
...Testing Apparatus for Open-and-closed Notebook Hinge Torsion Test Apparatus for Lab Testing Machine Purpose: Laptop hinge torsion test equipment is suitable for laptop, ultrabook, monitor and the other electronic products to do the torque test, and the torsion damping life-span test for the hinge, it can measure the torque......
Infinity Machine International Inc.
|
IEC 60065 2.5N Plug Insert Torque Balance Tester
|
...Test Equipment Plug Insert Torque Balance fixed socket-outlet, plug-in equipment Standard: IEC 60884-1 2013 ‘Plugs and socket-outlets for household and similar purposes -- Part 1: General requirements’ clause 14.23.2, IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ clause 22.3, IEC 60065 ‘Audio, video and similar electronic apparatus......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
EVSE Cable Anchorage Pull Force & Torque Test Apparatus IEC 61851-23
|
...Figure 111 and Table 114. Product overview The Cable Anchorage Pull Force and Torque Test Apparatus (Model SNQC1007B) is a professional testing solution designed in strict accordance with IEC 61851-23:2023 clause 11.6.102. It is specifically developed for...
Sinuo Testing Equipment Co. , Limited
|
1920HZ Precision Torque Screwdriver Tester，Torque Wrench Calibrating Apparatus
|
... design and manufacture of an intelligent multi-function measuring instruments. Mainly used to detect and correct a variety of torque screwdriver, a variety of products involved in the test of tightening force, parts torque destructive test. With...
NANBEI INSTRUMENT LIMITED
|
IEC60065 2014 Clause 15.4.3 B And C Pin Torque Test Apparatus Fixed Socket - Outlet
|
... provided with pins intended to be introduced into fixed socket-outlets. Test sample: fixed socket-outlet, plug-in equipment Feature: Mechanical, measuring torque and tension Parameters: 1. Weight: 4N one, 20N two, 50N one, can be used to achieve 40, 50,...
Guangzhou HongCe Equipment Co., Ltd.
|
Connection Plug Torque Test Apparatus for Devices forming a part of the MAINS Plug
|
... measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC 60065 clause15.4.1 and figure 11, IEC 60335-1 clause 22.3, IEC 60884-1 clause 14.23.2. The balancing arm of the test apparatus pivots......
HK LEE HING INDUSTRY CO., LIMITED
|
Submit your “torque balance test apparatus” inquiry in a minute :