Transmitter Tri Metal 2 Watts Sma Dummy Load Termination
|
2 watts Din M dummy Load .Low VSWR .Wide band .Used to be terminated for signal transit. Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port......
HeFei Vinncom Science And Technology Co.,LTD
|
2000 KW Metal Alloy Dummy Load Bank 4 Wire With Different Colour Container
|
Introduction Dummy load bank main used to test the capability and aging degree for high-power ups on-line, inverter, switch power and diesel generator set for electric power, telecom department and manufacturer. It can ensure the reliability of constant ......
Hebei Kaixiang Electrical Technology Co., Ltd
|
High Rigidity Rf Sma Dummy Load , 50ohm 300w Coaxial Load Lightweight
|
Rf Waveguide Components Rf Sma 50ohm 300w Dummy Coaxial Loading...
Chengdu SinoScite Technology Co., Ltd.
|
DC 67GHz 2W SMA Dummy Load Stainless Steel N Female Connector
|
DC-67GHz 2W Termination Zysen's 2W Wideband (DC-67 GHz) mmWave terminations available with 50 impedance & 1.85mm Female/Male connectors. With Great VSWR 1.15 Typ. High integrty. 1. Electrical Specifications Frequency Range DC 67GHz Power 2W CW at 25°C (......
Chengdu Zysen Technology Co., Ltd.
|
26GHz 100W SMA Male Dummy Load VHF Dummy Load custom
|
... 100W SMA Male Dummy Load Wide band Good VSWR Better heating shrink Part Number VN-DL-26G-100W-OSM Operating Frequency DC-26 GHZ Impedance ( Ohm ) 50 Application Indoor & Outdoor Degree of Protection IP65 Handling Power (Watt, max) 100W Interface SMA Male ......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
DC-3.8GHz 30W N Female Connector GSM Dummy Load RF Dummy Load Termination Load
|
....) 30 Operating Temperature( ℃ ) -40 ~ + 80 Body Material Aluminum Connector Material Brass(Silver plating for Inner Contact and Tri-metal plating for Outer Contact) OX in P/N...
SHENZHEN ZD TECH CO., LTD
|
Tri-Metal Plated Brass 1 Watt RF Load Up To 18 GHz With TNC Female Input
|
...Load Up to 18 GHz With TNC Female Input Tri-Metal Plated Brass Xi'an Elite Electronic 1 Watts RF load (also known as termination or dummy load) has a TNC connector that is female. This 1watts TNC female load / termination is rated for a maximum frequency of 18 GHz. Our TNC female termination load is a rf load termination with a 50 Ohm impedance.This TNC load......
Xi'an Elite Electronic Industry Co., Ltd.
|
10W Dummy Load RF Passive Termination Loads for Das SMA-M within DC-18GHz Customized
|
FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(GHz) DC-6 DC-12.4 ......
Anhui Bonfire Technology Co., Ltd
|
DC 12.4GHz 50ohm 10W Dummy Load VSWR 1.25 17×44mm
|
Coaxial Fixed Terminations Series 50Ω 10w Connector SMA DC-12.4 Max VSWR1.25 17×44mm Coaxial fixed terminationsabsorb RF＆ microwave energy and are commonly used as dummy loads of antenna and transmitter. Also used as mach ports in many multiport ......
Shenzhen Yulongtong Electron Co., Ltd.
|
N male Connector Termination dummy load N-50JR-18A
|
RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or ......
Terui International Group Co.,Ltd.
|