High Strength TZM Molybdenum Alloy Bars With HRC18 - 20
|
.... TZM is harder than pure molybdenum metal, and has higher recrystallization temperature and better creep resistance. The recrystallization temperature is about 1400 ℃, which is much higher than that of molybdenum, which can provide better weldability....
Zhengzhou Sanhui Refractory Metal Co., Ltd.
|
Diameter 20mm TZM Titanium Zirconium Molybdenum Alloy Bar Tzm Alloy Rod Tzm Metal Rod Molybdenum Alloy Rod Dia15mm 20mm
|
...Molybdenum Alloy Bar Diameter 20mm 1.The Titanium Zirconium Molybdenum Alloy Bar Diameter 20mm is described as follows: Black surface, alkali washing, automobile polishing, and grinding for bars. Titanium Zirconium Molybdenum Alloy Bar Requirements: Oxide coating and mild forging hammer marks are permitted on the surface of the forged molybdenum bar. The polished molybdenum bar......
Shaanxi Peakrise Metal Co.,Ltd
|
Molybdenum Copper Plate Rod / Plate / Sheet / Bar Tzm Molybdenum Alloy
|
..., alloy materials, etc. The processing fee of molybdenum copper alloy depends on many factors, including cost, market demand, supply chain situation and processing technology. Generally speaking, the processing fee of molybdenum copper alloy is between 2...
Zhenan Metallurgy Co., Ltd
|
Vacuum Furnace TZM Molybdenum Alloy Plate Customized
|
TZM Molybdenum Alloy Plate Customized Plate TZM/TZM Plate Specification Model Number TZM Product name TZM customized plate Shape plate Density 10.2g/cm3 Surface Polished,black, ground MOQ 1kg Standard ASTM B387 Material Ti-zr-mo Alloy Size Customer's ......
Luoyang Forged Tungsten-Molybdenum Material Co., Ltd.
|
10.2g/Cm3 Tzm Molybdenum Alloy For Semiconductor Parts
|
...: Customized Content analysis C Ti Zr 0.014% 0.65% 0.071% Application Used for semiconductor parts, vacuum parts and silicon controlled rectifiers. Molybdenum sheets is...
JINXING MATECH CO LTD
|
ASTM B386 TZM Molybdenum Alloy Fixture Moly Tzm Alloy For Vacuum Furnace Liner
|
... high temperature resistance, low pollution and other good characteristics. Commodity Name Pure molybdenum sputtering target Grade Mo-1 Specification As per customer request Purity Mo ≥99.95% Density 10.2g/cm3 ......
HENAN HUAMAO METAl MATERIALS CO ,LTD
|
Mo75Cu25 Molybdenum Copper Alloy Bar Diameter 20mm Molybdenum Alloy Bar MoCu Heat Sink Bar
|
Mo75Cu25 Molybdenum Copper Alloy Bar Diameter 20mm 1. 20mm Mo75Cu25 Molybdenum Copper Alloy Bar Specifications: The pseudo-alloy molybdenum-copper alloy bar is made up of two non-solidifying metals. It has both the characteristics of molybdenum and copper......
Shaanxi Peakrise Metal Co.,Ltd
|
3.18mm - 152mm Molybdenum Alloys Bar Resistance To Corrosion ASTM B-387
|
...Molybdenum Bar Resistance To Corrosion Molybdenum alloys have very high strength and stay stable even at a temperature as high as 1900°C. Such uniqueness contributes to the use of molybdenum alloys in furnaces used to melt glass, in the manufacture of X-ray anodes used for diagnostics, and in other high-temperature heating elements. Moly is also alloyed......
Luoyang Hypersolid Metal Tech Co., Ltd
|
ASTM B387 Molybdenum Alloy Bar
|
Molybdenum ASTM B387 Type 361 is a commercially pure grade containing 99.9% molybdenum. Trace amounts of potassium, aluminum, silicon, iron, nickel, copper, chromium, sodium and tungsten enhance the metal's properties. The melting point of this grade is 2610 degrees Celsius. Grade 364/365 round rod is another specific grade of molybdenum rod. These bars......
Gnee Steel (tianjin) Co., Ltd.
|
Zinc Ground Tungsten Molybdenum Alloy Bar Dia15*80mm Corrosion Resistant
|
...Alloy Bar Dia15*80mm Dimension: Dia1-dia60, length can be 1000mm. Can be customized Introduction: it is an alloy of tungsten and molybdenum. The content of tungsten in the commonly used tungsten molybdenum alloy is 30% ~ 50% (mass) Advantages: 1. High density: about 12g/cc 2. Zinc Corrosion Resistant 3. Composition: 30%tungsten+70% Molybdenum......
Zhuzhou Zhenfang Yaguang Tungsten Molybdenum Co., LTD.
|
Submit your “tzm molybdenum alloy bars” inquiry in a minute :