UL 60335-2-24 Articulated Probe With Flat Cone Shaped Hand 3.5 – 4.5 Year Age
|
..., Ice-Cream Appliances and Ice-Makers, Annex 101.DVA, Figure 101. DVA.1 Application: It is used for Hazard Assessment for Moving Parts; and Probes to Simulate Access to Hazardous Parts by Children. When evaluating potential pinch points, i...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
UL 60335-2-24 Figure 101.DVA.1 Articulated Probes 3.5-4.5 Year Age
|
UL 60335-2-24 Figure 101.DVA.1 Articulate Probes 3.5-4.5 Year Age Product Overview: This articulate probe meets the requirements of UL 60335-2-24 figure 101.DVA.1. It is used to for hazard assessment for moving parts of refrigeration or similar products, the moving parts should not cause personal injury when touched by children between 3.5 and 4.5 years old. The test probe......
Sinuo Testing Equipment Co. , Limited
|
UL 60335-2-24 Figure 101.DVA.1 Articulate Test Finger Probe With Flat And Cone Shaped Hand 3.5 – 4.5 Year Age
|
... arm. That motion can be equivalently represented by rotating the probe. 2 – The finger ″tip″ is developed to match the dimensions of the UL articulated probe. The diameter from the tip to the first joint then tapers from the tip dimensions to the...
KingPo Technology Development Limited
|
Flat Cone Shaped Hand UL 60335 Test Finger Probe With A Center Pin
|
...UL 60335 Test Finger Probe With A Center Pin UL 60335-2-24 Figure 101.DVA.2 Articulate Probe With Flat And Cone Shaped Hand 10.5 – 11.5 Year Age Notes: 1 – The probes were designed with a center pin to rotate the hand with respect to the lower arm. That motion can be equivalently represented by rotating the probe. 2 – The finger ″tip″ is developed to match the dimensions of the UL articulated probe......
Dongguan Kingpo Technology Limited
|
Articulated Children Test Finger Probe IEC61032 Figure 12 With Calibration Certification
|
...Figure 12 of the IEC 61032 (Test probe 18) and is used to simulate a children human finger. It is also used by the standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. The...
Pego Electronics (Yi Chun) Company Limited
|
IEC Standard Articulated Test Probe with 10N Thrust, IEC 61032
|
...standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. The Jointed Test Finger was made on stainless steel and Polyamide handle. Material: ......
HK LEE HING INDUSTRY CO., LIMITED
|
