UL Recognized Thermal Conductive Gap Pad For CD-Rom DVD-Rom Cooling
|
... thermal interface materials, thermal conductive insulators, thermally conductive tapes, electrically & thermally conductive Interface pads and thermal grease,Thermal Conductive plastic,Silicone Rubber,Silicone Foams,Phase Changing Materials products, with...
Dongguan Ziitek Electronical Material and Technology Ltd.
|
0.5mmT UL Recognized Thermal Conductive Gap Filler 2.5 G/Cc 18 Shore 00
|
...UL recognized thermal conductive gap filler For Audio and video components,2.5 g/cc ,18 Shore 00 The TIF120-18-01US use a special process, with silicone as the base material, adding thermal conductive powder and flame retardant together to make the mixture to become thermal interface material. This is effective in lower the thermal......
Dongguan Ziitek Electronic Materials & Technology Ltd.
|
TIF200-08-04U UL recognized CPU Display card Thermal Gap Filler Pad Heat Sink Thermal Pad
|
...UL recognized CPU Display card Thermal Gap Filler Pad Heat Sink Thermal Pad Product descriptions TlFTM200-08-04U is a silicone based, thermally conductive gap pad. Its unreinforced construction allows additional compliancy. This product has low hardness is conformable and is electrically isolating. The low modulus characteristic of the product offers optimal thermal performance with the ease of handling. Features > Good thermal...
CÔNG TY TNHH CÔNG NGHỆ ZIITEK VIỆT NAM
|
UL Pink Electrically Conductive Gap Filler , Anti Vibration Thermal Conductive Filler
|
...) ≥5.0 ASTM D149 Dielectric Constant(@10mhz) 7.3 ASTM D150 Volume Resistivity(Ω.cm) 1.0*1014 ASTM D257 Flammability V-0 UL94 Thermal Thermal conductivity(W/m.K) 3...
Shenzhen Aochuan Technology Co., Ltd
|
Soft Thermally Conductive Material Thermal Conductive Heatsink Silicone Gap Interface Pad
|
... fillers. Combining good thermal conductivity of 1.1 W/mK with high conformability, this gap filler produces low thermal resistance. The alumina filler allows the product to remain a cost effective solution where moderate thermal performance is acceptable....
Adcol Electronics (Guangzhou) Co., Ltd.
|
7.3mm 2W/MK Thermal Conductive Pad For LED Lighting , Non Silicone Gap Filler Pads
|
2.0W non silicone thermal interface conductive gap pad thermal gap filler LED Thermal Pad LED thermal pad is a high performance thermal conductive gap filling material, mainly used for thermal interface between electronic components and heat sink or ......
SZ PUFENG PACKING MATERIAL LIMITED
|
Thermal Interface Materia Thermal Silicone Pad For Lithium Battery Pack
|
..., natural viscosity of the surface, specially for the use of gap heat transfer design scheme production, can fill the gap, complete the heat transfer between the heating part and the heat dissipation part, but also play the role of insulation,...
Trumony Aluminum Limited
|
Pink Thermally Conductive Gap Filler Pads Silicone Based Tflex HD300
|
... line of products. Tflex HD300 is an excellent choice when wide manufacturing tolerances occur. These variable gaps can be filled with Tflex HD300 while generating minimal board and component stress. Laird's unique manufacturing capabilities, filler and...
ZSUN CHIPS CO., LTD
|
Dowsil TC-4525 Thermally Conductive Gap Filler 2.5W/m·K for Automotive
|
... of 2.5 W/m·K, low compression stress, and controlled silicone volatility. Product Introduction This material cures to a soft and compressible elastomer designed to dissipate heat from components on printed circuit boards to ......
Shenzhen Huazhisheng New Material Technology Co., Ltd.
|
5270 Two Component Thermal Gel Gap Filler Low Viscosity And Good Workability Able To Cure At Room Temperature
|
5270 TDS-EN.pdf 5270 is a two-component silicone thermal conductive gel, which has high thermal conductivity and low density Product Description Silicone thermal conductive two-component gel Low transient/static stress Two-part 1: 1 mix Product Features: ......
Shanghai Huitian New Material Co., Ltd
|