UL746A Clause 34 Glow Wire Ignitability Tester To Determine The Relative Ignitability
|
... of an insulating material from an electrically heated wire is described in the Method for Glow-Wire Ignitability Test on Materials, IEC 695-2-1 /3. Flammability Testing Equipment 34.1 .2 The Glow-Wire Ignition Temperature (GWIT) is to be assigned as the...
Guangzhou HongCe Equipment Co., Ltd.
|
Glow wire ignition tester,safety test equipment, glow wire testing machine
|
...wire ignition tester,safety test equipment Model FGW: Glow wire ignition tester,safety test equipment Glow wire ignition tester,safety test equipment is designed to test the resistance to fire of insulating parts. It assesses the susceptibility of electrical insulating materials to ignition as a result of exposure to a glowing wire.This test method determines the minimum temperature required to ignite......
ALLIED TESTING (HK) CO.,LTD.
|
Height 60mm Hot Wire Ignition Tester 250mm Anneal Holder Distance
|
... of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors. The...
Dongguan Kingpo Technology Limited
|
IEC 60695-2-20 Hot Wire Ignition Test Apparatus Hot Wire Ignition Tester 5.28Ω/M
|
...Wire Ignition Test Apparatus Hot wire ignition tester Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.Hot-wire coil ignition......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
UL746A Glow Wire Tester Flammability Test Of Insulating Materials Element Ф4mm ± 0.04mm
|
...11, IEC 60695-2-12, IEC60695-2-13, it is required by IEC 60335 clause 30, IEC 60598, UL746A, etc. This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in s short time....
Sinuo Testing Equipment Co. , Limited
|
UL746A ZY6055 Wire Testing Equipment Hot Wire Tester Machine IEC 60695
|
... within the device may be ignited by a hot wire or a hot element. Under certain conditions, such as the failure current, component overload, and adverse contact of the conductor, some elements will reach a certain temperature and ignite the parts nearby....
Dongguan HOOHA Electrical Equipment Company Limited
|
UL746A Flammability Testing Equipment Heavy Current Ignition Tester
|
Heavy current ignition tester Standard: IEC 60950-1,BS EN 60950-1,BS 7002, UL746A,IEC60947.1, IEC730.1. Application:It is suitable for arcing resistance test of electric and electronic products, household appliances and its materials. The working principle......
shanghai kerang technology co ltd
|
UL746A Glow Wire Test Equipment , IEC335 Multipurpose Cable Spark Tester
|
500 ºC ~ 1000 ºC UL746A Lab Glow Cable And Wire Testing Equipment Product Description: Glow wire testing machines are used for the burning test of insulating materials in place for parts of electrical equipment which are not fixed live parts but which ......
DONGGUAN YUYANG INSTRUMENT CO.,LTD
|
Lab Testing Equipment Fire Hazard Evaluation / Hot Wire Ignition Test Machine Ni80/Cr20 IEC60695-2-20
|
...Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-annealed at a defined power (0.26W/mm) and duration (8-12 seconds). The wire is wound in five full turns around the sample at a 6mm pitch, then tested at the same power (0.26W/mm) until ignition...
Hai Da Labtester
|
Oxygen Environment IEC 60601-1 Spark Ignition Tester For Me Equipment / Systems
|
IEC 60601-1 Spark Ignition Tester to check the RISK of fire in an OXYGEN RICH ENVIRONMENT for ME EQUIPMENT & ME SYSTEMS 1.According to standard: IEC 60601-1-Figure 34-figure37(clause 11.2.2) 2.Specifications Power Supply AC220V 50HZ According to the ......
KingPo Technology Development Limited
|
Submit your “ul746a clause wire ignitability tester” inquiry in a minute :