IEC62196-1 Clause 26.4 EV Plug And Vehicle Connector Cable Bending Test Apparatus For Flexing Test
|
... to IEC62196-1 clause 26.4 figure 20 and table 14, it is applied to do mechanical load flexing test of the non-rewirable accessories of ev plug and vehicle connector. Test method: The sample is fixed to the oscillating member of the apparatus so that at...
Pego Electronics (Yi Chun) Company Limited
|
IEC62196 Electric Vehicle Screwed Glands Torque Test Apparatus
|
..., and For Electric Vehicles" clause 26.5, table 15. Equipment Overview This screwed gland tester conforms to IEC 62196-1Ed.4CDV 2020 clause 26.5, table15. Based on the above table, the torque range is 5N.m to 12.5N.m. As per client’s requirements, the...
Sinuo Testing Equipment Co. , Limited
|
Switched Socket Outlets Vehicle Connectors Withdrawal Force Test Apparatus
|
... 14.1.6, fig13, fig14, table 5.It is used to check the maximum force required when the plug is pulled out of the socket-outlet or connector. Technical parameters: 1. The frame is composed of a bottom plate, a column, a sample installation fixture, and a...
Sinuo Testing Equipment Co. , Limited
|
IEC62196-1 Pull Force And Torque Test Apparatus For EV Plugs And Connectors Cable Anchorage
|
...: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and...
KingPo Technology Development Limited
|
IEC 60335 Power Cord Twice Tension And Torque Test Apparatus Can Be 120N
|
...: 16.5, IEC60598: 5.2.11 and other standard provisions. It is used to evaluate power cords, and it is intended to be permanently connected with flexible cords. Perform two tests of tension and torque at the terminals to power cables such as...
Dongguan Zhongli Instrument Technology Co., Ltd.
|
60 Times/min Soft Cable Retention Testing Apparatus Wire Crimping Test Device
|
...Cable Retention Testing Apparatus Wire Crimping Test Device Product details: The cable retention test device is designed and manufactured according to the standard requirement of IEC60884 figure 20. It is used to test cord retention and check the effectiveness of the retention of the cable and cord anchorage. Test method: The cord anchorage is used in the normal way, clamping screws, if any, being tightened with a torque......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60884-1 Flexible Cable Flexing Test Apparatus Flexing Angles Adjustable
|
... 21； IEC 60320-1 ‘Appliance couplers for household and similar general purposes –Part 1: General requirements’ clause 22.3 and figure 7. Application: Connectors/plug connectors shall be so designed that the cord cannot be...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
10 MW Flammability Test Apparatus Microcomputer Controlled Heat Release Rate Test Device
|
10 MW Flammability Test Apparatus , Microcomputer Controlled Heat Release Rate Test Device Scope of application: Applicable to buildings and large complexes (including locomotive vehicles, vehicles, warehouses and components) and extensive fire resistance ......
Dongguan HOOHA Electrical Machinery Company Limited
|
Integrated Design Fire Testing Equipment Smoke Density Test Apparatus ASTM E662
|
...Testing Equipment Smoke Density Test Apparatus Introduction: Measure the optical density of smoke when a certain thick specimen is exposed to a heat source of 25KW/m2 or 50KW//m2; It is widely used in assessing characteristics of vehicle interior and inflammable cable. Applicable standards: ASTM E 662 Standard test......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Ph2.0 2 Pin JST Connector Cable Male And Female For Electric Bicycle
|
... Connector Pole 2 pin Connector jst-ph crimp insert JST PH-002T-P0.5S rocessing ways Crimping, pressing and soldering types. Pin out connection As per customer’s request Performance Test 100% electrical and electricity performance test JST SHR-06V-S-B...
Shenzhen Sino-Media Technology Co., Ltd.
|