High Elongation High Density Alloy W-Ni-Cu Tungsten Alloy Bar
|
high density tungsten nickel copper W-NI-Fe alloy bar rod counterweight Feature Tungsten alloy rod has high density, high melting point, small size, high wear resistance, high hardness, high tensile strength, high elongation, high temperature resistance......
Luoyang Forged Tungsten-Molybdenum Material Co., Ltd.
|
Bright Polished W Ni Cu Tungsten Nickel Iron Alloy Tube Tungsten Alloy Tube
|
...even tungsten-nickel-copper-iron. Some tungsten alloys also add other metal elements such as cobalt, molybdenum, and cadmium. It can be made into various shapes. High specific gravity tungsten alloy tubes are usually used to make nuclear radiation shields,...
Shaanxi Peakrise Metal Co.,Ltd
|
Tungsten alloy plate strap stick block bar
|
...Tungsten Alloy plate 1. Width*Length: (2.0-250.0mm)*(2.0-250.0mm) 2. Thickness: 2mm-15mm 3. Density: 15.8-18.50 g/cm3 4. Composition: W content: 85-97%, W-Ni-Fe, W-Ni-Cu 5. Surface: Sintering surface, Ground surface The main performance of the tungsten alloy......
Mudanjiang North Alloy Tools Co., Ltd.
|
15.8-18.5g/cm3 High Density Tungsten Alloy Plate 85-97WNiFe WNiCu
|
...Density 15.8-18.50g/cm3 Composition W content: 85-97%, W-Ni-Fe, W-Ni-Cu Surface Sinter state, finish state Size according to your drawing or requirement. Application balance weight, Military industry Introduction The density of tungsten heavy alloy is very...
Zhengzhou Sanhui Refractory Metal Co., Ltd.
|
W-Ni-Cu Tungsten Nickel Copper Alloy High Thermal Conductivity
|
..., but also has copper of high thermal conductivity properties, and the tungsten and copper in the thermal expansion coefficient and thermal conductivity can be adjusted with the W-Cu composition, also the composite can be machined to various shape, these...
JINXING MATECH CO LTD
|
High Quality AZ31B Magnesium Alloy Plate/Sheet, Customized Size
|
...: 0.6-1.4%, Mn: 0.2-1.0%, Si: 0.1%max, Fe: 0.003%max, Ca: 0.04%max, Cu: 0.01%max, Ni: 0.001%max, Others: 0.3%max; Mg: remainder 2) AZ61A Al: 5.8-7.2%, Zn: 0.4-1.5%, Mn: 0.15-0.5%, Si: 0.1%max, Fe: 0.005%max, Cu: 0.05%max, Ni: 0.005%max, Others: 0.3%max;...
Dongguan Hilbo Magnesium Alloy Material Co.,Ltd
|
High Performance Tungsten Alloy Ball , Weights Tss Tungsten Super Shot Pellets
|
... Performance Tungsten Alloy Ball Weights Tss Super Shot Pellets Description Name Tungsten super shot tss Diameter 1.9mm,2.0mm,2.15mm,2.25mm,3mm--100mm (customized your need) Density 15.8-18.75 g/cm3 Composition W content: 85-99%, W-Ni-Fe, W-Ni-Cu Surface ......
Hunan TRX International Co., Ltd.
|
Grind Surface Tungsten Copper Plate Tungsten Copper Alloys
|
...tungsten copper alloy tungsten copper plate as Electronic packaging materials Products detail: W-Cu heat sink material is a composite of tungsten an copper, with both tungsten low expansion characteristics, but also has copper of high thermal conductivity properties, and the tungsten and copper in the thermal expansion coefficient and thermal conductivity can be adjusted with the W-Cu......
Fonlink Photoelectric (Luoyang) Co., ltd
|
Monel 400 Ni Cu Copper Nickel Alloy Wire Plate Customized Size ISO 9001 Approval
|
Monel 400/ monel k500 Ni Cu alloy sheet strip with good quality size customized Characteristic as below: Monel 400 is an extremely combination property that use for largest amount and most widely corrosion resistance alloy. This alloy in the hydrofluoric ......
Shanghai Tankii Alloy Material Co.,Ltd
|
0.4mm tungsten copper plate custom made pure tungsten sheet plate
|
1,Description: Material: Tungsten copper plates are composed of a composite material consisting of tungsten (W) and copper (Cu). Density: The density of tungsten copper plates typically ranges from 14.5 to 16.5 grams per cubic centimeter (g/cm³), depending......
Luoyang Hypersolid Metal Tech Co., Ltd
|
Submit your “w ni cu tungsten alloy plate” inquiry in a minute :