TUP A B C Hammer Diameter Drop Weights Testing Equipment
|
..., ISO 8256, ISO 16422, ASTM D2444, ASTM D3763, ASTM D7136, EN 744, EN 1411, and more. This means that the equipment can be used to perform tests that comply with the industry standards for impact testing. The...
Beijing Jinshengxin Testing Machine Co., Ltd.
|
RTH Computer Controlled Electronic Creep dead weight testing equipment
|
...weight testing equipment Specifications Creep testing machine 1.Routine creep,stress-rupture,tensile test 2.Digital display 3.High accuracy 4.laboratory equipment HOT Computerized Electronic Laboratory Equipment for creep testing machine Application RTH series is a kind of full electronic creep rupture testing machine to perform routine creep and stress-rupture test......
jinan hardness STING EQUIPMENT CO., LTD
|
600Bar Dead Weight Test Equipment For Water Pressure Balance
|
.... While the pressure in the liquid pipe is displayed, when the two pressures are equal, the two are balanced (the specific value of the pressure in the pipe and the sum of the weights are detected. That is, the pressure value in the pipeline). When the...
Xi'an Yunyi Instrument Co., Ltd
|
10 Sets Weights Tape Adhesive Testing Equipment / Viscosity Tester
|
...Weights Tape Adhesive Testing Equipment / Viscosity Tester Introduction This machine does some loading tests deriecting at adhesive force. Characteristic 1. Auto-recording the time which the tape hold under some weight to confirm the limitation of adhesive tape. 2. The retention of the time will be recorded automatically when the tape holds under certain weight......
Dongguan Liyi Environmental Technology Co., Ltd.
|
IEC60730-1 IEC Test Equipment Label Marking Abrasion Testing Sliding Weight 500g
|
...Test Equipment Label Marking Abrasion Test Machine Sliding Weight 500g Production introduction: This testing apparatus is design and manufactured according to IEC60730-1 standard figure 8 and annex A requirements, used for testing the controller marking durability performance. The apparatus comply with the dimensions requirements of IEC 60730-1 Figure 8. Test times can be set from 1 to 999999 (default as 12 times), test......
Guangzhou HongCe Equipment Co., Ltd.
|
ISO 8124-4 Pendulum Test Equipment / Apparatus 210mm Diameter For Toddler Swing
|
... of barbell weight 210mm Material steel Procedure The pendulum test apparatus consists of a 4,5 kg barbell weight at the top of a freely pivoting bar and a 4,5 kg barbell weight affixed to the bottom of the test apparatus. The barbell weights shall have a...
SKYLINE INSTRUMENTS CO.,LTD
|
90×25×70cm Size Peel Adhesion Test Equipment Viscosity Testing Equipment with 10 Sets Weights
|
...certain temperature. The test show the resistent moving capability of adhesive tape which sticked on the testing board under certain temperature. Use the distance or time the specimen moved (or completely droped) showing the enduring tack of adhesive tape....
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
60s Strength Test Equipment Handle Lifting Carrying One Handle 220V IEC60236-1
|
...Test Equipment for Medical Equipment 1. Introduction The handle strength test apparatus is designed to meet the test requirement of to IEC60236-1-2018 clause 8.8, GB9706.1-2007 clause 21. It’s applied to test the strength of handle for lifting or carrying the equipment, like of portable medical equipment. A weight exerts a force of 3 times or 2 times the weight of the equipment......
Pego Electronics (Yi Chun) Company Limited
|
Transparent Observation Window Flammability Test Equipment with Weight Of Copper Block 1.76 G±0.01 G/10g±0.05 G
|
... IEC 60695 UL94 ASTM D635 is a top-of-the-line product in the Flame Test Equipment category. This Horizontal Flammability Testing Equipment is designed to meet the requirements of various international standards including IEC60695-11-3, IEC60695-11-4,...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 62368 Test Equipment.IEC 62368-1 TESTING AND MEASURING EQUIPMENT
|
...Test Equipment.IEC 62368-1 TESTING AND MEASURING EQUIPMENT No. Items Description 1 Temperature and humidity chamber IEC62368-1-cl.4.1.4 Model:KP-HWS1000L 2 Test Apparatus for device forming mains plug IEC62368-1-cl.4.7 Model :KP-LJ220 Technical Parameter: 1. As per IEC60065-fig11 2. Weight: 1N, 2N. 3. Socket:UK, EU. 4. Arm of force 0-320mm 5.mension: 350*150*150 mm 3 Jointed test probe for equipment......
KingPo Technology Development Limited
|
Submit your “weight testing equipment” inquiry in a minute :