WNiCu Machined Tungsten Alloy Shafts High Performance 95% W For Motor Engine
|
..., copper, cobalt, molybdenum, chromium and other elements. High density tungsten alloy density as high as 15.20~18.70g/cm3, also known as high proportion tungsten alloy or high density alloy material. Because the tungsten alloy weighs more than twice as...
JINXING MATECH CO LTD
|
High Hardness Tungsten Alloy Shaft Anti Vibration With Ni And Fe
|
High Hardness Tungsten Alloy Shaft Anti Vibration With Ni And Fe 1. The tungsten alloy round rod adopts low-pressure sintering technology, and the quality is stable and reliable 2. Using automatic pressure relief extrusion ......
Zhuzhou Sanxin Cemented Carbide Manufacturing Co., Ltd
|
90W10NiFe Tungsten Alloy Bar Tungsten Heavy Alloys
|
...tungsten heavy alloy tungsten alloy bar for balancing weights Products detail: Application: wnife tungsten alloy part 1. WNiFe alloy is widely used in fields of aerospace, aviation, military and oil drilling; 2. It is also applied for electrical instrumentation, medical and industrial purpose; 3. WNiFe alloys......
Fonlink Photoelectric (Luoyang) Co., ltd
|
18.5g/cm3 High Density Tungsten Heavy Alloy Rod WNiFe Tungsten Nickel Iron
|
...WNiFe Tungsten Nickel Iron High Density Tungsten Alloy Rod Specification Product Name WNiFe WNiCuTungsten Alloy Rod Material Tungsten Nickel Iron Alloy Tungsten Nickel Copper Alloy Density 15.8-18.50g/cm3 Composition W content: 85-97%, W-Ni-Fe, W-Ni-Cu Surface Sinter state, finish state Size according to your drawing or requirement. Application balance weight, Military industry Introduction Heavy Tungsten Alloy are made of tungsten...
Zhengzhou Sanhui Refractory Metal Co., Ltd.
|
High Purity Silver Grey Wnife Tungsten Heavy Alloy Metal Parts
|
... elements. Here is an English description of tungsten alloys: Tungsten alloys are dense and high-strength materials that exhibit exceptional mechanical properties. They are composed of tungsten as the primary constituent, typically ranging from 85% to...
Luoyang Hypersolid Metal Tech Co., Ltd
|
Polished 95 Wnife Block Carbide Wear Parts Tungsten Alloy Cube
|
..., high ultimate tensile strength, high ductility, high temperature resistance, etc. Tungsten alloys are widely used in many industrial sectors. Tungsten alloy block can be easily used for car weighting .The product also is manufactured as the parts of...
Zhuzhou Zhenfang Yaguang Tungsten Molybdenum Co., LTD.
|
MoW30 MoW50 Molybdenum Tungsten Alloy Crucible Machined Molybdenum Crucible
|
...Tungsten Alloy Crucible 1. Description Of MoW30 MoW50 Molybdenum Tungsten Alloy Crucible Machined Molybdenum Crucible: An alloy made of tungsten and molybdenum is known as a molybdenum-tungsten alloy. The tungsten content of commonly used tungsten-molybdenum alloys is 30% to 50% (mass). The preparation method of tungsten-molybdenum alloy is the same as that of metal molybdenum material and molybdenum alloy......
Shaanxi Peakrise Metal Co.,Ltd
|
Racing Car Diesel Engine Crankshaft Tungsten Alloy Vehicle Ballast
|
Tungsten Alloy Vehicle Ballast Vehicle Counterweight Racing Car Weights Diesel Engine Crank Shaft Product Information Tungsten Alloy Vehicle Ballast Drivers consistently report they can sense differences in how a car handles on the track if the weight on a given wheel varies only by a couple of pounds. Fine tuning a car to a given track is a very cumbersome and time consuming ordeal with conventional lead plate weights. Tungsten alloy......
Hunan TRX International Co., Ltd.
|
Glass Fiber Manufacturing Molybdenum Tungsten Alloy Sintered Crucible
|
...molybdenum is referred to as tungsten-molybdenum alloy.The tungsten content in commonly used tungsten-molybdenum alloys is 30% to 50% (by mass). Similar to metal molybdenum material and molybdenum alloys, tungsten-molybdenum alloys are made by sintered and...
Shaanxi Peakrise Metal Co.,Ltd
|
ASTM Polished Tungsten Alloy Bar W80cu20 99.95%W Pure Tungsten Rods
|
...Tungsten Alloy W80cu20 Bars/Rods & 99.95%W Pure Tungsten Rods Product Description Pure tungsten plate/sheet and molybdenum sheet/plate/foil/strip Tungsten sheet/plate/foil/strip Specification: 1) Tungsten Sheet/Plate Purity: 99.95% 2) Density: >19.1g/cm3 3) Size: according to the needs of users: T(0.03-40)*W(20-600)*L L<2000mm 4) Surface: Black,Alkali Wash and Polished 5) Condition: hot roll 6) Products Application: Tungsten......
HENAN HUAMAO METAl MATERIALS CO ,LTD
|
Submit your “wnife tungsten alloy shaft” inquiry in a minute :