100kg load toys testing equipment

Brand Name:SKYLINE

Model Number:SL-S43-A

Place of Origin:China

...Loads For Ride On Toys And Seats Overload Test Product Information Place the toy on a horizontal plane. Load the toy on its standing or sitting surface with the appropriate mass in accordance with below table Conduct the test for overload requirements so that it will be consistent with the advertised mass capacity of the toy, if that mass is higher than the required load...

Brand Name:HTI

Model Number:TW-257

Place of Origin:,China(Mainland)

... by force. Pull the toy at a constant speed of 2 m/s ± 0.2 m/s on a surface covered with aluminum oxide sand paper P60 and determine the maximum pull force. Toys will be under test placed on the conveyor belt, the drive wheel until the toy speed of 2m/s

Brand Name:YUYANG

Model Number:YY1147

Place of Origin:China

... created by pendulum effect. Parameters: 1. Load cell capacity: 0-2500N 2. Accuracy: +/-0.5% 3. Direction: Horizontal 4. No of loading advice:4 in total 5. Loading Point height: 30-180cm 6. Motor : 4 servo actuators 7. Controller: PLC+ Touch screen 8.

Brand Name:YUYANG

Model Number:YYT005C

Place of Origin:China

...Toys Testing Equipment Rattle Sound Bell Toys Tester Description: The bell toys tester is also called the sound toys tester, the toys testing template AB and sound toys testing template. There are two kinds of template: the round one and the oval one. It stimulates the volume of the mouth to check whether the toys or the toys...

Brand Name:GESTER

Model Number:GT-M04-1

Place of Origin:China

.... Standards: EN-71-1 section 8.17.1 Test principle The catapult was placed into the mouth-actuated projectile toys. Add pressure of 13.8kPa ± 5% on the mouthpiece, lasts for 5 seconds, test a total of 10 times. Detecting whether the projectile through the

Brand Name:HJ

Model Number:AM0023

Place of Origin:China

...test room Turntable bearing 100kg Auto Parts Test Equipment Products Introduction: The rain test room complies with the national military standard GJB150.8A-2009 program I rain and rain test, and is used for simulating dynamic operation of military equipment or electronic products in various intensity rain environments, rain test methods and main parameters of military equipment, and wind rain test

Brand Name:HYD

Model Number:100KG

Place of Origin:Dongguan,China

...100KG Loading Wire Feeder Equipment 1. FEATURES AND APPLICATIONS: Automatic Auxiliary Equipment 100KG Loading Wire Decoiler for Small Spring Machine. HYD could provide 60KG,100KG,200KG,500KG,1000KG decoiler for additional purchasing. 2. SPECIFICATION: Model 200 KG decoiler Equipment Painting Blue Diameter of Plate 1100mm Equipment...

Brand Name:BAXIT

Model Number:GLO-M59

Place of Origin:Shanghai, China(mainland)

Packaging Transportation Vibration Testing Equipment Price FUNCTIONS 1, table size (mm): 500×1000 other sizes can be customized 2. Amplitude: 0~5mm 3, the maximum load: 100kg 4, frequency: 1Hz~600Hz 5, the maximum acceleration: 0 ~ 20g (1g = 9.8m/S2) 6, ...

Brand Name:LABTONE

Model Number:SKT100

Place of Origin:CHINA

... components and systems. The Programmer allows the operator to perform the two shock pulse waveforms commonly used for fragility testing—short duration half sine and long duration trapezoidal shock pulses. The combination of table size, payload capacity,

Brand Name:DAXIAN

Model Number:DX7004

Place of Origin:China

...Testing Equipment for Children Safety Toys Test Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe B: for the children over 3 years old Standard Configuration: Accessibility Probes AB 1 set,Test

Brand Name:KEJIAN

Model Number:KJ-1065A

Place of Origin:Dongguan,China

... Uses: Tensile Strength Testing Equipment ​ is designed specially for the adhesive industry. Used to testing peeling strength with different methods. It can perform the 180&90 degree, T-shape peeling test and tensile,shearing&spliting strength test with

Model Number:KFZ

Place of Origin:China

...load loss, short circuit (load) loss, resistance voltage, etc. KFZ Transformer Load Loss and No Load Loss Testing Equipment is small in volume, light in weight, in high accuracy, with steady property, easy to operation can replace the traditional testers.

Brand Name:AI

Model Number:AIC-5182

Place of Origin:China

...Load Capacity Testing Equipment Introduction FZG gear wear test machine is a multi-purpose testing machine.It can be used for the evaluation of the scuffing load capacity of the lubricant, also can be customized according to client’s demands. It is usually using for gear bending fatigue strength and gear touch fatigue strength test. This FZG scuffing load capacity testing equipment...

Brand Name:SAMYON

Model Number:SLPT

Place of Origin:CN

... under emergency matter or after notice shown. The displacement sensor waterproof level is IP68, can work in the water. And have two installation methods: to pile or to beam. The testing information, Q~S curve,

Brand Name:Sinuo

Model Number:SNQC1009

Place of Origin:China

... 14 IEC60309-1: 2012 “Plug, socket-outlets and couplers for industrial purposes–Part1: General requirements” clause 24.4, figure 9 Equipment Structure It is used to

Brand Name:Jianhong

Model Number:JH-RYF-30KWD1000-W10A

Place of Origin:China

...Load Bank Testing Equipment For Short Circuit And Overload Tests Core Positioning of the Product The JH-RYF-30KWD1000 DC load bank is an industrial-grade test device specially designed for the verification of high-voltage DC systems. It adopts a modular manual control architecture and meets the test requirements in the energy field. As a 30KW-level DC load...

Brand Name:LIYI

Model Number:XHRD-150P

Place of Origin:Dongguan, China

..., it is equipped with sophisticated sensors so that can test data more accurate ; 5.6 inch digital LCD screen provide comprehensive data for quality control, you can conveniently derive test data into computer through hardness transmission software.

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-B615A-S

5000kg Celtron Load Tensile Testing Equipment , Automatic Compression Testing Machine Download File: Tensile Testing Machine Standards Sharing.pdf Main Parameter: Item Description Max. Force 5000 kg (50KN) Load cell Germany brand load cell for high ...

Brand Name:Kaixiang

Model Number:AC400-800kW

Place of Origin:China

..., main electrical parameters including the dynamic parameters tested. Application The system can be used with a computer to realize the intelligent control, automatically completing the special test to all electrical parameters of generating set and