10l min mask particle tester

Brand Name:HAIDA

Model Number:HD-W810-2

Place of Origin:Guangdong, China (Mainland)

CE Approval 10L/Min Air Permeability Tester For Textiles YY 0469-2011 Usage Used to measure the pressure difference index of medical surgical masks under specified conditions. Test standard YY 0469-2011,Y/T 0969-2013,EN14683:2019 Features and Advantages...

Brand Name:BAXIT

Model Number:BXT-455

Place of Origin:CHINA

...Tester Application: Applicable to the determination of the burning properties of materials such as plastics, rubbers, fibers, foams, films, films, and textiles Technical parameters: The use of imported oxygen sensor, digital display oxygen concentration without calculation, higher accuracy and accuracy, range 0-100% Digital resolution ±0.1% machine measurement accuracy 0.4 Flow adjustment range 0-10L/min...

Brand Name:SUJING

Model Number:SJPM-F006

Place of Origin:CHINA

...10-100L/Min PFE Automated Filter Tester The automated filter media tester is used for performance testing of filter elements, disposable masks, filter media, etc. for respiratory protection products. The automated filter media tester's suitable for safety ...

Brand Name:HongCe

Model Number:HH0803

Place of Origin:China

...10L/min Water Flow | 150Kpa Pressure | IPX3 and IPX4 Compliance Tester Product introduction HH0803 anti-spray and water handheld test device is a high-precision IP protection grade test device designed for electronic equipment. It has 121 0.5mm water spray holes, provides 10L/min...

Brand Name:Daxian

Model Number:DX2022

Place of Origin:China

.... Factory direct sales, mask inhalation and exhalation filter or filtration efficiency tester automated filter tester. Standards: NIOSH 42 CFR 84, EN 149 YY/T 2626-2019 respiratory protection products Technical Parameters: ...

Brand Name:GESTER

Model Number:GT-RA13

Place of Origin:China

Masks Clogging Tester GT-RA13 Product Introduction Application: The sample is surrounded by a known concentration of dolomite dust in air. Following the exposure, the breathing resistance and the filter penetration of the sample particle filtering half mask are measured. Standards: EN 149 section 8.10 Key Specification Model GT-RA13 Dust DRB 4/5 dolomite Dust Distributor Particle...

Brand Name:Great Win

Model Number:GW-104

Place of Origin:China

... masks, and it can also be used to determine the gas exchange pressure difference of other textile materials. Instrument characteristics: 1. Using a suction-type air source as the ...

Brand Name:HOOHA

Model Number:HH-14

Place of Origin:Guangdong

..., labor protection inspection centers, drug inspection centers, disease prevention and control centers, textile testing centers, hospitals, masks and respirator manufacturers. Applicable standards GB /

Brand Name:ZL

Model Number:ZL-5066

Place of Origin:China

... the filter material is tested according to international standards. The design structure of the whole tester is compact and light, and in the process of running the test, it only needs to provide additional suitable power and compressed air (no water,

Brand Name:CQP

Model Number:SW-1L

Place of Origin:Hunan,China

...10L/min Max nebulizing rate ≥0.2ml/min Noise ≤65dB(A) Power supply AC220±22V,50±1Hz It is a new generation nebulizer. It reduces liquid medication to tiny particles by compressing air. The tiny particles can be inbreathe by the patients. Compact structure

Brand Name:KINGPO

Model Number:ZR - 1310

Place of Origin:China

... Mask Particle Filtration Efficiency Tester ZR-1310model Salt Aerosol Generator Product introduction ZR - 1310 salt aerosols generator is the use of collison nozzle will have a certain specific concentration NaCl solution after spray drying, particle ...

Brand Name:Sinuo

Model Number:SN122603

Place of Origin:China

...Mask Respiration Resistance Testing Equipment Respiration Resistance Face Mask Tester ±1000Pa 85±1L/ Min With Standard Test Head Model Product overview: The mask breathing resistance detector is used to measure the inhalation and exhalation resistance of the mask under specified conditions. It is applicable to carry out relevant testing and inspection of mask products for mask...

Brand Name:Delta

Model Number:OLTC-0.6

Place of Origin:China Mainland

... and high voltage switch. It can effectively absorb the slight water and prevent the small mechanical particles by cyclic purifying system of the bypass while the main system is under normal working, and control the oil cleanness and dielectric strength in

Brand Name:KERANG

Model Number:WDS-02E

Place of Origin:China

Medical Mask Tension Tester This product is widely used in the tensile, compression, bending and shear tests of metal and nonmetal materials. Equipped with various accessories, it can also be used for the mechanical property test of profiles and members...

Place of Origin:Guangdong, China

Brand Name:chaungying

Model Number:Kn95

#detail_decorate_root .magic-0{vertical-align:top}#detail_decorate_root .magic-1{vertical-align:top;display:block;padding-right:4px;box-sizing:border-box;padding-left:4px}#detail_decorate_root .magic-2{vertical-align:top;padding-bottom:4px;box-sizing:...

Place of Origin:China

Brand Name:CHENGFENG

Specification Filtration efficiency (0.001 ~ 99.999)% Resistance 0~2000Pa, accuracy 2% Test area 100 square centimeters Test Mode Initial Efficiency and Loading Efficiency Customer Photos 1. Unique selling point: 12 years of professional research and ...

Brand Name:Haida

Model Number:HD-W810-6

Place of Origin:China

...Tester For Mask Exhalation Valve APPLICATION The Air Tightness Tester is mainly used for air tightness testing of masks and respirators under specified conditions. Applicable to masks, respirators and breathing valve manufacturers, quality supervision, scientific research, wearing and other units. Standard:GB 2626-2019 Technical Parameters Pumping rate 0-10L / min ~ 100L / min, adjustable, standard 2 L / min...

Brand Name:SKYLINE

Place of Origin:China

...mask gas exchange pressure difference tester Use: This tester is used to determine the ventilation resistance and pressure difference indicators of medical surgical masks under specified conditions. Features: 1. HD color touch screen. 2. High precision imported digital differential pressure meter. 3. High precision imported flowmeter, high precision flow control. Parameters: Flowmeter range 0-10L/min...

Brand Name:lixian

Model Number:HZ-9502

Place of Origin:China

Medical Particle Filtration Efficiency Test Machine HZ-9502 Medical Particle Filtration Efficiency Test Machine HZ-9502 (PFE) is used for testing the filtration efficiency of particulate matter of melt blown fabric, daily protective masks and medical masks...

Brand Name:MCreat

Model Number:127

Place of Origin:China

Adjustable Venturi Mask Features Features 7 color-coded diluters: 24%(blue) 4L/min, 28%(yellow) 4L/min, 31%(white) 6L/min, 35%(green) 8L/min, 40%(pink) 8L/min, 50%(orange) 10L/min, 60%(red) 15L/min The product can be transparent green and transparent white...