13 8kpa toys testing equipment

Brand Name:GESTER

Model Number:GT-M04-1

Place of Origin:China

.... Standards: EN-71-1 section 8.17.1 Test principle The catapult was placed into the mouth-actuated projectile toys. Add pressure of 13.8kPa ± 5% on the mouthpiece, lasts for 5 seconds, test a total of 10 times. Detecting whether the projectile through the

Brand Name:SKYLINE

Model Number:SL-S12

Place of Origin:CHINA

... to a mandrel, which is then rotated for a single 360-degree revolution along the accessible edge being tested. If the tape is cut in half or longer in length (approx. 13 mm), the edge is identified as a hazardous sharp edge. Toys intended for use by

Brand Name:Hust Tony Instrument

Model Number:TW-229D

Place of Origin:MADE IN CHINA

... mouth moving toys or children's mouthpiece has been mistakenly inhaled and cause a choking hazard Load the mouth-actuated projectile toy with the intended projectile and apply a pressure of 13,8 kPa ± 5 % in the direction of the mouthpiece for 5 s.

Brand Name:YUYANG

Model Number:YYT030

Place of Origin:China

... the tube or external testing of the components of the two sensors detect the ejection toy parts used away after a certain period of time, it has calculated the move Energy. The main instruments used for this test launch of baby toys or children's safety.

Brand Name:YUYANG

Model Number:YYT005C

Place of Origin:China

...Toys Testing Equipment Rattle Sound Bell Toys Tester Description: The bell toys tester is also called the sound toys tester, the toys testing template AB and sound toys testing template. There are two kinds of template: the round one and the oval one. It stimulates the volume of the mouth to check whether the toys or the toys...

Brand Name:DAXIAN

Model Number:DX7004

Place of Origin:China

...Testing Equipment for Children Safety Toys Test Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe B: for the children over 3 years old Standard Configuration: Accessibility Probes AB 1 set,Test

Brand Name:Sinuo

Model Number:SN772

Place of Origin:China

... index (GWFI) test method for materials” IEC60695-2-13 “Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials” IEC60695-2-10 “Fire hazard testing - Part 2-10:

Brand Name:HongCe

Model Number:LT-3

Place of Origin:China

...13.4 Tracking Test Equipment Standard: Conforms to IEC 60065:2014 clause 13.4, IEC60335-1 clause 29.2, Annex N Application: It is used for determination of the relative resistance to tracking performance that solid electrical insulating material under the action of an electric field, when the surface exposed to water containing impurities. Test sample: Lighting equipment...

Brand Name:Sinuo

Model Number:SN1112E

Place of Origin:China

... is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the ...

Brand Name:kingpo

Place of Origin:china

... intended for use by children under 8 years of age, and such edges exposed in normal use or as a result of reasonably forseeable damage or abuse of such toys and articles, present a potential risk of injury by laceration or avulsion. Standards: EN 71-1

Brand Name:AI

Model Number:SLQ

Place of Origin:China Mainland

... requirements relating to all toys and specific requirements and methods of test relating to the following toys, which are considered as being those presenting the greatest hazard: -toys to be worn on the head: beards, moustaches, wigs, etc. made from

Brand Name:KINGPO

...Test Equipment For Toy Subsidiary Materials Toy Flammability Safety Test Apparatus Product information: This device is designed and manufactured according to ISO8124 toy safety combustion performance. Adopting the burner that conforms to ISO6941, this testing device is suitable for combustion performance testing of all kinds of toy...

Brand Name:PEGO Group

Model Number:PG-TE598

Place of Origin:China

... test equipment is designed to meet the test requirements of of IEC60598-2-13 clause 13.6.1 and 13.6.2. It is applied for recessed luminaires to test the resistance to static load, torque load and shear load, tthe purpose is to simulate the stress of such

Brand Name:GAOXIN

Model Number:GX-MZ

Place of Origin:Guangdong, China (Mainland)

Toy Packaging Industry Transportation Simulation Vibration Test Equipment Low Noise 1.Specifications Max. Test Load 0.5T Frequency Range 60-300 round/min adjustable Amplitude Range 25.4 mm P-P(1 inch) Programmable ...

Brand Name:Haida

Model Number:6023-HD

Place of Origin:China

Toy Comprehensive Combustion Tester Product Description Toy Comprehensive Combustion Tester tester evaluates the combustion performance of children's clothing, toys, and accessories by measuring burning speed and duration. It is designed for: Children's ...

Brand Name:LIYI

Model Number:LY-145

Place of Origin:Dongguan

... attached snap fasteners onto garments or toys. Button Snap Pull Tester complies with ASTM PS79-96, ASTM F963 , etc. What is our Garment Button Pull Tensile Testing Machine used for? Garment Button Pull Tensile Testing Machine, to determine the holding or

Brand Name:Infinity Machine

Model Number:V8010

Place of Origin:Made in China

Toy Package Box Vibration Testing Equipment Food Carton Vibration Table Testing Machine Packaging Vibration Tester Model: V8010 Features: 1. Good performance. 2. Digital display for vibration frequency 3. Low noise: with synchronous noiseless belt transmission. 4. Cycling vibration system: in compliance with USA & EURO shipping standards. 5. To use slideway for testing...

Brand Name:Lixian

Model Number:HZ-3607

Place of Origin:China

..., food, pharmaceutical products that have the hidden iron, needles, nails. Footwear Testing Equipment Corresponding Standard QB/T 2638-2004 Footwear Testing Equipment Applicable Industries Widely used in the export of garments, knitwear, bedding, down

Brand Name:SHC

Model Number:SC-GRE

Place of Origin:China

... Max. load 20KN Rubber punch diameter 50mm, thickness 50mm Maintain time 5-10s for torque test, 1min for static load test Station 1 station Standard IEC 60598-2-13 Clause 13.6.1, 13.6.2 Control Mitsubishi PLC Display Touch screen Production introduction:

Brand Name:ASLi

Model Number:AS-100

Place of Origin:China

...Testing Machine , Shock Test Equipment , Inspection Lab Equipment Application: 150 ~ 300 RPM Package Vibration Testing Machine , Shock Test Equipment , Inspection Lab Equipment to test the vibration-resistance of packed Toys, electronics, furniture, gift, ceramics,equipment...