20 times hour iec test equipment

Brand Name:HongCe

Model Number:HH0812A

Place of Origin:China

... safety standards for electrical equipment. The IEC standards reduce safety hazards that can occur from unpredictable circumstances when using electrical test equipment such as test instruments and meters. Safety ventilation system: 1. There is no built-in

Brand Name:HJ

Model Number:HJ0604

Place of Origin:China

IEC Test Equipment For Abrasion Resistance Test With Speed Of 20 ± 5mm/s Standard: IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ clause 21.2; IEC 60950-1 ‘Information technology equipment – Safety – Part 1: General requirements’ clause 2.10.8.4 and Figure 2K. Application: It is used for abrasion resistance test...

Brand Name:KINGPO

Place of Origin:China

Lamp Holder Pendulum Impact IEC Test Equipment Manual Release Mode Pendulum Impact Testing Machine / Device For Lamp Holder Impact Resistance Test Product overview: This tester conforms to the standard of GB1444-2008 clause 5.3 and Figure 4, it is used...

Brand Name:SHC

Model Number:SC-XZ

Place of Origin:China

MFR And MVR Mfi Melt Flow Index Test Equipment Melt Flow Indexer Product Specifications: Model No SC-MI-400 Machine size(W*H*D) 250*540*390mm Temperature range Room temperature+10°C to 450°C Performance Temperature fluctuation ±0.2℃ Temperature uniformity...

Brand Name:Gaoxin

Model Number:GX-3020-Z

Place of Origin:China

...IEC 62133 RT + 10 ~ 200 ℃ Tested Temperature Battery Testing Equipment Battery Thermal Heating Test Chamber IEC 62133 Thermal Abuse Test. A: Requirements: An extremely high temperature shall not cause fire or explosion B. Test: Each fully charged cell, according to the second procedure in 7.1.2 is placed in a gravity or circulating air-convection oven, in an ambient temperature of 20 ± 5 ℃ for 1 hour...

Brand Name:Sinuo

Model Number:SN2116

Place of Origin:China

...IEC 60335-1 Annex H, IEC60065:2014 clause14.7 and clause 15.1, IEC 60884-1 2013 clause 20, 21, IEC 61058-1, IEC60669-1 etc. The test equipment has 3 synchronously work stations, which can test 3 linear switches, or 3 plugs or 3 sockets at the same time.

Brand Name:Sinuo

Model Number:SN1005

Place of Origin:China

... 62196-3 Ed.4CDV 2020 clause 22 and 23. IEC 60309-1: 2012 clause 20 and clause 21. Equipment Overview This test equipment meets the requirements of IEC 62196-3: 2020 clause 22 and 23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and

Brand Name:YUYANG

Model Number:YY613

Place of Origin:China

IEC 60331 Wire and Cable Fire-resistance Impact Testing Equipment Descriptions: Wire and Cable Fire-resistance Impact Tester is used to detect the fire resistance of cable wiring or power grid, burning in not less than 830 degrees, the flame, and exerts ...

Brand Name:kingpo

Model Number:KP-FT04

Place of Origin:china

...Testing Equipment Horizontal-Vertical Flame Chamber Tester Brief Introduction Horizontal Burning Test:UL HB,IEC 60695-11-10,IEC 60707,ISO 1210,GB/T 2408 50W Vertical Burning Test :UL94 V0,V1,V2,IEC 60695-11-10,ISO 1210,IEC 60695-11-4 500W Vertical Burning Test :UL94 5VA,5VB,IEC 60695-11-20,ISO 9770,IEC 60695-11-3 Membrane Material Vertical Burning Test...

Brand Name:ASLI

Model Number:ES-20

Place of Origin:CHINA

...test equipment ES-20.pdf 2000kg.F Force Vibration Table Test Equipment for IEC 60335-2-24 and IEC 60335-2-40 high frequency vibration test machine is mainly used for product vibration and shock environmental test environment, environmental stress screening test, reliability test, tests may be needed to do for aerospace, communications, electronics, electrical, communications, home appliances and other areas of the products. It is a test

Brand Name:SKYLINE

Model Number:SL-SE011

Place of Origin:China

...Testing Equipment IEC60335 Stability Test Bench Standards: It is to determine the stability of electric appliances which are used on a table or on the floor In accordance with IEC 60065 / 1998-07 clause 19.1, IEC 60335-1 / 1991-04 clause 20.1, IEC 60601-1 /1988 clause 24.1, IEC 60950 / 1991 + Amendments, modified, clause 4.1. 1, EN 60335-1 / 1994 and A11 / 1995 clause 20...

Brand Name:DAXIAN

Model Number:DX8427

Place of Origin:China

... of resistance to electric tracking and corrosion. Executive standard: - IEC 60587-2007 Technical parameter: Test time 6 hours Drip device igh precision peristaltic pump Number of experimental groups five groups Equipment structure the control panel is

Place of Origin:China

Brand Name:KeRang

Flexing Pipe Winding Test Device HDJ0005 Our company has a core team with years of technology development, technology transfer, technical consulting, technical services experience, providing Appliance Test Equipment, Medical Device Testing Equipment, ...

Brand Name:Kinte

Model Number:WH-8903JK

Place of Origin:Guangdong,China (Mainland)

...Test Equipment , Needle Burner Flame Test Equipment​ The needle-flame test is a simulation test item specified in IEC 6 0695-2-2: 1991 (2nd edition), IEC 6 0695-2-2 No. 1 (1994-03). Needle flame test is the use of the needle size burner (Φ0.9mm), through a specific gas (butane or propane), the 45 ° angle to the direction of timing test products, test products and pilot bedding is cited Burning and burning time...

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

Hot-Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-...

Brand Name:LABTONE

Model Number:EV210

Place of Origin:CHINA

...Test Equipment Meets IEC 60068-2-6 ASTM D4728 ISTA Standard Product Description EV series of electromagnetic vibration testing system is specially designed to meet the need for long-time operation. Vertical and horizontal vibrations can be achieved by the installation of vibration resistant base. The standard platform is equipped...

Place of Origin:ZHEJIANG,CHINA

Brand Name:SHENGDI TECHNOLOGY

Model Number:HS-6103

...hour Meter Test Device Features The bench accords with the standard of “IEC 60736:1982 testing equipment for electrical energy meters”, “IEC 62053” The bench can test both Mechanical & Electronic single phase active energy meter and reactive energy meter (up to 0.2 class), it is also suitable for four quadrant energy meter testing. The bench can do warm up test, starting test, no load test(creep test...

Brand Name:KRE

Model Number:KE8301M

Place of Origin:China

KE8301 Full Automatic Three Phase Meter Test Bench Accuracy : 0.05 , Used for the test of three phase CT/PT meter with a accuracy class below 0.2, Number of meter position : 3-48 Main Functions: Base error test Dial test (energy accumulation test) Error ...

Brand Name:GDZX

Model Number:ZX267X Series

Place of Origin:China

IEC Standards High Voltage Test Equipment 5kV 10kV AC Hipot Tester Product Introduction: This series of products is a basic type voltage withstanding tester with excellent performance. The output voltage is regulated by regulator of high reliability and high durability. LED digital high brightness screen displaying test time, voltage, current, real-time displaying breakdown current value and voltage value; alarm current value freely preset; test

Brand Name:AI

Model Number:AIC-1478

Place of Origin:China

AIC-1478 Low-Temperature Torque Test Equipment Introduction The Low temperature torque tester uses a standard 204 bearing for testing. After 2 hours of stationary and constant temperature at a specified temperature, it rotates at a specified speed to ...