2x2 fiber optical switch

Model Number:HX-GL2

Place of Origin:Guangdong, China

Brand Name:HX

... MHz·km @1300nm ≥1000 MHz·km ≥600 MHz·km Numerical aperture 0.200±0.015NA 0.275±0.015NA Optical fiber cable cut-off wavelength ≤1260nm ≤1450nm Applicable: pipeline, overhead Optic fibre cable (in increments of 2 fibers) Number of fibers

Brand Name:Linkopto , or OEM

Model Number:LT-Fiber optical switch

Place of Origin:China

...2x2 Optical Switches Iis through and Cross optical state. Its used in Channel Blocking, Configuration add/drop solution with low optical distortions and high reliability. The optical path through the units is purely optical; i.e. there is no optical to electrical to optical conversion. There is no electrical loss or electrical bandwidth limit on the fiber optic path. The optical path will redirecting an incoming optical...

Brand Name:GEZHI or OEM

Model Number:2x2 add drop optical Switch

Place of Origin:China

... at PCB board. The 2x2 optical Bypass switch is swiftly set to bypass mode to isolate the mainnetwork from the local networking device. GEZHI supply various type of optical switch like 1x1, 1x2, 2x2, 1x3, 1x4, Dual 1x2, 2x2, 2x4, Multi-channel, 1x8,

Brand Name:UNIFIBER-OEM

Model Number:Mechanical 2x2 Bypass Optical Switch 1310/1550nm

Place of Origin:CHINA

...2x2 Bypass Optical Switch Non-Latching 1310/1550nm for Optical Add/Drop 2x2 Mechanical Optical Switch is used to turn on, turn off and switch optical signal. The 2x2 Mechanical Optical Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical network in near future. Features Applications Unmatched Low Cost Optical

Brand Name:GEZHI or OEM

Model Number:GZ-2x2B Optical Switch

Place of Origin:China

2x2 Bypass Mechanical Fiber Optic Switch 1310 / 1550nm Latching OXC system GEZHI Phothonics 2x2 Bypass Mechanical Fiber Optic Switch (2X2B Optical Switch) connects optical channels by redirecting an incoming optical signal into a selected output fiber. All GEZHI Photonics’ 2x2 Bypass Mechanical Fiber Optic Switch (2X2B Optical Switch) support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching

Brand Name:HILINK

Model Number:HFSW-2X2B

Place of Origin:China

...Fiber Optic Switch bypass with board PCB Board Hilink 2x2 Fiber Optic bypass switch module packing in a Metal case available for high operating temperature. Its comes with 1310&1550nm singlemode Non-Latching type SC/APC pigtailed. 2x2 Bypass Fiberoptic Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber...

Brand Name:ANC

Model Number:1x4 Optical Switch

Place of Origin:China

...Optical Switch SM 1310/1550nm 1m 900um FC/APC Description 1xN mechanical fiber optic switch manufactured by ANC International Co., Limited connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. The mechanical operation offers ultra-high reliability and fast switching...

Brand Name:TTI

Model Number:S-1

Place of Origin:Guangdong, China

FBT 1X2 2x2 Fiber Optic Splitter 1310/1550nm 0.9mm ABS Type ratio 30:70/60:40/50:50 For FTTX System splitter Quick Detail: Name: PLC splitter Type: 1×2, 2x2 Mode: Singlemode Fiber type: G652D, G657A1, G657A2 Cable jacket: PVC, LSZH, OFNR, OFNP Cable ...

Brand Name:KCO, Kocent Optec Limited

Model Number:KCO-Mini-2*2-SCA

Place of Origin:Guangdong, China

...2x2 Fiber Optic PLC Splitter SC/APC LC/APC Green Connector 900um 1.5m LSZH Descriptions: PLC (Planar lightwave circuit) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical...

Brand Name:OLYCOM

Model Number:OSW1x2

Place of Origin:China

...Fiber Optic Switch Introduction Olycom's 1x2 Mechanical Fiber Opitc switch is used to turn on and turn off optical signal. The 1x2 Mechanical Fiber Optic Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical...

Brand Name:OPTFOCUS

Place of Origin:China

...Fiber Optic Switch is an advanced optical network switch that provides reliable and stable transmission of high data rate signals over optical fiber. It is designed to meet the stringent requirements of next-generation fiber-optic networks. With a maximum data rate of 10/100/1000/10000 Mbps, the Fiber Optic Switch...

Place of Origin:China

... small size, high reliability, cheap cost and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. hongking provides whole series of 1xN and 2xN splitter products that are tailored for

Place of Origin:China

Brand Name:Fiberroad

...Fiber Optic Switches , Port Trunking Switch 9 ports Gigabit Ethernet Optical Fiber Switch has eight 1000M SFP sockets and one 10/100/1000M UTP ports. Customer can choose different 1000M SFP module according as his demand, such as Multimode or Singlemode, Single fiber or Dual fiber...

Brand Name:SPACECOM or OEM

Model Number:1*2-D-5L-SM-025-15-00

Place of Origin:China

...Optical Switch Description Name: Mechanical Fiber Optical Switch 1×2 Model Number: 1*2-D-5L-SM-025-15-00 Operating Temperature: -5~70ºC Operating Voltage: 3.0 V Or 5.0V Keyword: Fiber Optical Switch Dimension: L27×W12×H8.2 (±0.2) Warranty: 1Year Certification: CE RoHS FCC Features Compact Size Fast Switching...

Place of Origin:China

Brand Name:HTD

...Fiber Optical Switch Latching Single Mode Features: 1. Low insertion loss 2. Wide wavelength range 3. Low crosstalk 4. High stability and reliability 5. Epoxy-free optical path 6. Latching and non-latching Application: 1.R&D in laboratory 2.System monitoring 3.Configurable OADM 4.Metropolitan area networks 5.Component testing 6.Fiber sensor Pins Definitions Pins Defining Optical...

Brand Name:J&K

Model Number:FR-SW2GF4GT-XXXX

Place of Origin:SHENZHEN,CHINA

... Gigabit network via fiber cable to a maximum distance up to 80KM. This series converters are fully compliant with IEEE802.3z & 802.3ab standards. It can be installed into a Standard ...

Brand Name:YOUCii

Model Number:U8418

Place of Origin:CHINA

...Fiber Optic Switches AC 220V 288mm×260mm×117mm 1*8 single-mode optical switch is a device with multi-channel optical path switching function, which mainly has the following uses: ▲Multi-channel optical monitoring in optical transmission system; ▲LAN multi-light source/detector automatic switching, light sensing multi-point dynamic monitoring system; ▲ Optical test system for optical fiber, optical...

Brand Name:SINOHONE

Model Number:HY-508GI

Place of Origin:Sichuan, China

... the formation of the LAN easier and easier, and can also be connected to the remote LAN through the fiber interface of the product. Building a network with this product can greatly reduce network investment, simplify the network structure, and make the